![]() |
Originally Posted by happytheman Hey there Fire, Pint, Onzedge, Alcheng, Alchemy, GurneyEagle , Galeforce, JARblue, LunaZ, Kenchan, DLSTR, Spohn and M4A1Mustang... All you folks keep this thread fresh and fun!
|
![]() |
|
LinkBack | Thread Tools | Display Modes |
|
![]() |
#1 (permalink) | |
A True Z Fanatic
![]() Join Date: Aug 2009
Location: N/A
Posts: 76,801
Drives: N/A
Rep Power: 141521 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
![]() so for fresh news...hummmm... i got the cupmout holder replacement coming to me later in the week along with a 3ft 3.5mm cord for my tascam portable digital recorder + gopro. (swivel wasnt horizontal due to detents). i put a little piece of e-tape between the arm and holder area on the bottom to eliminate all noise. i can go over bumps with the tascam not picking up any rattles from the holder. ![]() if anyone has a tascam digital recorder handy, i highly recommend using that as the mic and preamp. just set the mic level using the display (mine is set at 4 on the dial), and turn up the output level until the gopro clips on the loudest passage. in my case my gopro started clipping at 14, so using 12 clicks from zero output level. this is by far the best sound. i can choose to just stand-by in record mode (battery lasts forever) on the tascam or actually record so i have real audio + audio going to the gopro (with 2000mAh eneloops it can run 5-6hrs no issue at 320bps MP3). oh yah, i also got the windcutter 'stormwatcher' deadcat over the weekend and tried it on my real sony mic for gopro. worked great! ![]() ![]() other then that i think i might swap out my stereo speakers this summer. |
|
![]() |
![]() |
#2 (permalink) | |
A True Z Fanatic
![]() Join Date: Aug 2011
Location: Ontario, Canada
Posts: 21,749
Drives: Varis Arising II
Rep Power: 51865 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
I can take video and pictures no problem, the whole audio recording and syncing thing has me ![]() ![]()
__________________
![]() |
|
![]() |
![]() |
#3 (permalink) | |
A True Z Fanatic
![]() Join Date: Aug 2009
Location: N/A
Posts: 76,801
Drives: N/A
Rep Power: 141521 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
if i want to use cleaner audio, i would use the mp3 file recorded on the Tascam and use my LogicAudio software (or garageband can do the same) and trim the audio where you want to use for the vid clips. there' no timecode so i have to manually sync it using audio references such as turn signal click or engine rpm, or if you want, snap your fingers or clap to aid in your manual syncing. you can move the audio track left/right with your curser in iMovie to time it just right. for the audio source i just place the tascam in the cupholder area. i chose this location because it is closest to my listening plane inside the cabin. i can also talk normally while driving and my voice is recorded very audibly as if i had a lapel mic. this is where the cupholder mount comes in handy. ![]() i can pickup plenty of nice exhaust audio and in-cabin audio including music playing off my Z's stereo. the music clarity is to the point it almost sounds like i added it in post-production. ![]() btw, im using an older tascam model called D7. it was like $250 or something a yr or so ago. ![]() Last edited by kenchan; 06-20-2012 at 12:15 PM. |
|
![]() |
![]() |
#4 (permalink) | |
A True Z Fanatic
![]() Join Date: Aug 2011
Location: Ontario, Canada
Posts: 21,749
Drives: Varis Arising II
Rep Power: 51865 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
![]()
__________________
![]() |
|
![]() |
![]() |
#5 (permalink) | ||
A True Z Fanatic
![]() Join Date: Aug 2009
Location: N/A
Posts: 76,801
Drives: N/A
Rep Power: 141521 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
![]() ![]() ![]() Quote:
![]() here's a list of major brand/popular recorders available. ![]() Portable Recorders | Sweetwater.com |
||
![]() |
![]() |
#6 (permalink) | |
A True Z Fanatic
![]() Join Date: Aug 2011
Location: Ontario, Canada
Posts: 21,749
Drives: Varis Arising II
Rep Power: 51865 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
__________________
![]() |
|
![]() |
![]() |
#7 (permalink) | ||||
A True Z Fanatic
![]() Join Date: Aug 2009
Location: N/A
Posts: 76,801
Drives: N/A
Rep Power: 141521 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
![]() Quote:
Quote:
![]() ![]() i am also tuning-in to the changes mazda brings to the 3. i think im going to kick myself getting the ugly MS3 after seeing the more normal-looking next gen car. ![]() and at the end of the day if someone is willing to give me a super deal on a xB, i might take that. Quote:
i use tascam as that's wat ive been using the last 25+ yrs with success. |
||||
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
What did you do with your Z today II | Trips | Nissan 370Z General Discussions | 7271 | 04-11-2012 08:28 PM |
Saw a GTR today | bigaudiofanat | The Lounge (Off Topic) | 30 | 07-15-2011 05:14 PM |
Do you know what today is? | Jeffblue | The Lounge (Off Topic) | 145 | 07-01-2011 09:47 AM |
Today was the day! | NewYorkJon34 | New 370Z Owner | 4 | 06-23-2009 03:03 PM |
Got My Car Today | PJ370Z | New 370Z Owner | 2 | 03-01-2009 12:30 AM |