What did you do with your Z today II
 

I washed mine after two weeks :)

Wow. Mine goes in shock if I go more than a week. :icon17:

:eek: new thread!

Mine has not been washed for three weeks. Saw dust all over it from new hardwood floors installed, will be an embarrassment today next to Mr. onzedges always immaculate Z.

Yup, thread overload after it hit 10000, I have already noticed my T6 bandwidth drop by 50mbps.

:icon17:

Hmmm, well glad I was part of the party responsible for the thread overload! :tup:

No Z action yet today, but I took my wife out in her for some good Mexican food last night.

took zed out since it's been such a mild winter. drove really fast :p

Wait a min, why a new thread?? Trips is flexing his muscle on us by shutting down the original thread and starting his own. :roflpuke2:

:wtf2:

when threads hit 10000 the servers really start slowing down to a halt, kinda like the cross brnx expsway during rush hour

:stirthepot:

Trips

:rofl2:

http://www.funpicsfree.com/photogall...8/huge_man.jpg

MrZ (from end of first thread) looking nice, super clean :tup:

:icon18:

Oil cooler install with ZForce and others (Hal's Z is first):

http://www.the370z.com/members/onzed...lin-hals-z.jpg

:tup:

Hmmm, I was unaware.

Lookin good over there onzedge:tup: I think Im going to be ordering a Z1 oil cooler kit over the winter.

Good times are being had by the Onzedge clan!
Gonna say it again, wished I lived by the man!

There I go, waxing poetic! :)

:tup:

Took some pics of the wheel spacers today. Here are a couple comparing the stock spacing to the 15mm that were added both front and rear.

http://photos.eddiedelgado.com/photo...-sSBcMSs-M.jpg

http://photos.eddiedelgado.com/photo...-ns3gSJV-M.jpg

More pics.

http://photos.eddiedelgado.com/photo...-ThrgpvV-M.jpg

http://photos.eddiedelgado.com/photo...-R28Rr52-M.jpg

http://photos.eddiedelgado.com/photo...-7z738tV-M.jpg

http://photos.eddiedelgado.com/photo...-vgJdvMz-M.jpg

I also took the car out for a spin this morning to get a feel for the Hotchkis sway bars. My first impressions are that I feel the bumps in the road much more but the balance of the car is way better. Going left to right and vice versa are super smooth now. All I need now to finish off the suspension are some KW V3's to keep the car stuck to the ground.

^^ Nice, PedZ!!!

pedz- looks perfect! nice job. :tup:

mr.onzedge - looks like install party is going very well. :D


no z action (or any car action for that matter) for me today. been in my music room remodeling (moving my gear around).. :p started yesterday 2pm worked until 1am, then 8am to about noon. :D

Lookin' good Pedz

thanks

just got back from a nice drive to the beach and around a few curves and some straightaways

What do spacers do for the handling on the Z's?

Spacers just make the wheels more flush with the wheel wells. They are also supposed to improve handling a little bit since you are widening the cars stance but I highly doubt change is anything significant.

Thanks guys.

Ditto!:tup:

:tiphat:

ZForce's oil cooler installation:

http://www.the370z.com/members/onzed...er-install.jpg

rule of thumb:

wider front better turn-in (excessive = oversteer bias)
wider rear better straight-line stability (excessive = understeer bias).

you will need at least 10mm change to make a noticable handling/feedback difference on street. :)

you will also notice wheel rate changes from about 10mm given you are running the same tires and psi.

on my car i had ET15 on the rear and was having slight understeer bias with ET38 so added a 5mm on the front (ET33). perfect. :p

Wow pedz, it's fantastic what 15 mm will do for you! :tup:

Haha, same here. I think I go into more shock than the car sometimes. :icon17:

A Motley Crew with ZForce's Z.

http://www.the370z.com/members/onzed...otley-crew.jpg

ZForce's Z.

http://www.the370z.com/members/onzed...-zforces-z.jpg

A backyard shot with ZForce et al:

http://www.the370z.com/members/onzed...7-img-1816.jpg

:tup:

Drove it!

:tup: very nice Mr. Onzedge!

Thanks, man. :tiphat: