What did you do with your Z today II

happytheman · 03-13-2012, 07:06 PM

Quote:

Originally Posted by kenchan

cool.

i think you will be happier that way imho... or atleast the car will drive the way it was intended on stock dampers.

do you have spacers on your car right now? if so, i think it would look good around front ET32-35 (nismo wheels are 42?) and rear ET15-19 (nismo wheels are 24?).

I think I need to do some reading, because I have no idea what you just said. It must have been some Asian dialect.

happytheman · 03-13-2012, 07:08 PM

Quote:

Originally Posted by Fire

Mine read 61 degrees. Didn't see the temp anywhere that I passed to see how accurate it was.

Thats what phone apps are for, bro!

Quote:

Originally Posted by NYBladeZ

Today I drove to work, set off 100 car alarms in the parking garage and continued to conduct and exhaust symphony until I got home.

What's your exhaust setup?

GaleForce · 03-13-2012, 08:40 PM

Quote:

Originally Posted by Fire

I'm going to have nightmares again

Gale DON"T encourage the Va pervert LOL

Hahaha...

ZMan8 · 03-13-2012, 09:21 PM

Quote:

Originally Posted by happytheman

I think I need to do some reading, because I have no idea what you just said. It must have been some Asian dialect.

He is talking about wheel offsets ET32 means an offset of 32mm which is the distance between the center of the wheel to the mounting point

370Zsteve · 03-13-2012, 09:26 PM

Installed my LED front parking lights

happytheman · 03-13-2012, 09:42 PM

Quote:

Originally Posted by ZMan8

He is talking about wheel offsets ET32 means an offset of 32mm which is the distance between the center of the wheel to the mounting point

Yah I guess stock 19" wheels are ET47 Front and ET30 Rear. I'm mtrying to chew on this a bit tho: the distance between the center of the wheel to the mounting point.

I've got more reading to do!

kenchan · 03-13-2012, 09:48 PM

Quote:

Originally Posted by Fire

One thing I have to say is that Kenman knows what he speaks when it comes to the Z, other things not so much

lol!

hey, the Z and i come from the same origin.

but then again, i may have lived in the US longer than you.

Quote:

Originally Posted by 370Zsteve

Installed my LED front parking lights

nice!

so i took about 2 hrs cleaning my garage (still not done) and reorganizing my shelves and tool case. was able to make more room for more tools... so i dont need the add-on intermediate drawer. i need more tools to fill the void.

hahaha.

hummm... wat to do with the $200 i just saved...

ZMan8 · 03-13-2012, 10:10 PM

Quote:

Originally Posted by happytheman

Yah I guess stock 19" wheels are ET47 Front and ET30 Rear. I'm mtrying to chew on this a bit tho: the distance between the center of the wheel to the mounting point.

I've got more reading to do!

Offset = (0.5 x wheel width) - the distance from the mounting surface to the rim edge.

hope this helps

kenchan · 03-13-2012, 10:15 PM

happy- wat zman said.

are you on stock 19's? if so, a clean look at stock height is 15mm bolt-replacement type spacers front and rear. some folks like 10mm on the rear.

for a more aggressive look people use 20mm all around... or if lowered 20mm/25mm bolt-on spacer setup.

so you got:
ET47 (stock) - 15mm stud replacement spacers = ET32 for front
ET30 (stock) - 15mm stud replacement or bolt-on spacers= ET15 for rear

hope this helps.

ZMan8 · 03-13-2012, 10:20 PM

I read (can't find thread) the hubcentric lip on the eibach spacers is .1 mm different then H&R. Anyone have input on this?

Fire · 03-13-2012, 10:24 PM

If you take 1/3 the distance from top of wheel to fender and factor in the ground clearance from the front bumper to the ground and measure the roof to the ground you get? Numbers. And confused.

Did that help Happy?

Fire · 03-13-2012, 10:26 PM

Kenman subscribe to a sushi of the month club with the $200.

happytheman · 03-13-2012, 10:29 PM

I thought I had it, then Fire FUBARed everything!

Quote:

Originally Posted by kenchan

happy- wat zman said.

are you on stock 19's? if so, a clean look at stock height is 15mm bolt-replacement type spacers front and rear. some folks like 10mm on the rear.

for a more aggressive look people use 20mm all around... or if lowered 20mm/25mm bolt-on spacer setup.

so you got:
ET47 (stock) - 15mm stud replacement spacers = ET32 for front
ET30 (stock) - 15mm stud replacement or bolt-on spacers= ET15 for rear

hope this helps.

Yes, I'm on stock 19's, and this information did help! Thanks so much!

I am wondering though...Does the width of the tire have much play when adding spacers if at stock height? I'm about to add a 275/305 setup and had been thinking about a 10/15 or 15/20 spacer setup.

Fire · 03-13-2012, 10:29 PM

I'd just go by my man Ken's recomendations. Glad I could help LOL.

onzedge · 03-13-2012, 10:32 PM

Quote:

Originally Posted by Fire

If you take 1/3 the distance from top of wheel to fender and factor in the ground clearance from the front bumper to the ground and measure the roof to the ground you get? Numbers. And confused.

Did that help Happy?

03-13-2012, 09:26 PM	#4280 (permalink)
370Zsteve A True Z Fanatic Join Date: Sep 2009 Location: Gold Coast CT Posts: 10,599 Drives: 2019 Corvette G.S. Rep Power: 42	Installed my LED front parking lights __________________ SOLD MY Z MARCH 2018 - another Core OG moves on - new ride 2019 Z Corvette Grand Sport - no mods necessary but already have eyes on HFC and intakes LOL IT NEVER ENDS.

03-13-2012, 10:20 PM	#4285 (permalink)
ZMan8 A True Z Fanatic Join Date: Oct 2011 Location: Chicago, IL Posts: 5,844 Drives: 10 370z 40th M6 Rep Power: 658	I read (can't find thread) the hubcentric lip on the eibach spacers is .1 mm different then H&R. Anyone have input on this? __________________ 2010 370Z 40 Anniv., 6 MT \| Fast Intentions \| Swift Springs \| SPC \| Z1Motorsports \| JWM \| Redline Oils \| 35% Window Tint 2015 Mazda6 \| 370ZChicago: Chicago Area Cars & Coffee

03-13-2012, 10:24 PM	#4286 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 42	If you take 1/3 the distance from top of wheel to fender and factor in the ground clearance from the front bumper to the ground and measure the roof to the ground you get? Numbers. And confused. Did that help Happy? __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

03-13-2012, 10:26 PM	#4287 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 42	Kenman subscribe to a sushi of the month club with the $200. __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

03-13-2012, 10:29 PM	#4289 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 42	I'd just go by my man Ken's recomendations. Glad I could help LOL. __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

03-13-2012, 10:15 PM	#4284 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	happy- wat zman said. are you on stock 19's? if so, a clean look at stock height is 15mm bolt-replacement type spacers front and rear. some folks like 10mm on the rear. for a more aggressive look people use 20mm all around... or if lowered 20mm/25mm bolt-on spacer setup. so you got: ET47 (stock) - 15mm stud replacement spacers = ET32 for front ET30 (stock) - 15mm stud replacement or bolt-on spacers= ET15 for rear hope this helps.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
PSA for today	USMCASA	Nissan 370Z General Discussions	6	08-29-2011 07:08 PM
New Z today!	dbvato	Introduction	16	10-06-2010 05:13 PM
look what I got today!!! :)	irishboy	Australia/New Zealand	16	07-31-2009 12:54 AM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM