Vandalized!! WTF?

tjlazer · 06-20-2010, 04:11 PM

Quote:

Originally Posted by ZedZed

Funny as the "Tobacco Cigaratte" is far worse and more addictive than "Marihuana"

PapoZalsa · 06-20-2010, 04:18 PM

Quote:

Originally Posted by Triple's

Sorry to see that.
Call up a dent Dr. and see what the cost will be for them to come out and repair it. I wouldn't report it.

Yeap, like I oisted before I had a dent and the Dent Dr, repaired for $75.

However that damage might cost more, but try it first. Most of them are mobile and don't charge a service or tax fee. They have a Nationwide website.

quagmire87 · 06-20-2010, 04:46 PM

do a paintless dent repair. it seems that there are not scratches and its good to do it. or do it yourself with a towel and a pry bar by taking the panels apart. good luck!

kenchan · 06-20-2010, 05:29 PM

Quote:

Originally Posted by tjlazer

Yes PDR should fix that right up and it should be around $100 or so! No bondo or paint required! You should not be able to notice it at all after if they do a good job.

PDR is right. that's more like a $300+ job, i thinks if done at a reputable shop.

do yourself a favor and DONT touch it, let the pro's do it. the more angles you accidentally put in there the harder it is for the tech to fix.

Hi-Step'n370Z · 06-20-2010, 06:09 PM

Quote:

Originally Posted by kenchan

PDR is right. that's more like a $300+ job, i thinks if done at a reputable shop.

do yourself a favor and DONT touch it, let the pro's do it. the more angles you accidentally put in there the harder it is for the tech to fix.

AGREED!!!!!! Let a pro fix it before you make it worse, no offense, but don't touch it.

v8zracer260z · 06-20-2010, 06:14 PM

I agree do not attempt the repair yourself it will make it impossible for a PDR tech to repair. From looking at the pics it may be possible to repair via PDR the tricky part wil be the wheel arch area as body line significantly strengthen the metal making PDR difficult also that area has limited tool access due to the inner wheel well meeting the outer sheetmetal.

drdre8424 · 06-21-2010, 07:28 PM

thats a bad day!

tjlazer · 06-21-2010, 07:48 PM

You can try a hair dryer and Compressed air! It wont hurt the paint, worth a try!

nicknick · 06-21-2010, 10:12 PM

Quote:

Originally Posted by ZedZed

I don't get what kind of brain damaged wanker would do such a thing to ANY car

. You'll get it back as new and forget about it, don't worry too much about it because this is exactly what that idiot tried to achieve -> to piss you off.

yes this kinda thing sucks bigtime and the worst part of it is if you catch the pricks and give them a beating, the law will come down on their side. Or you could restrain them and they claim excessive force you're screwed in the eyes of our law. the law is to blame for a part of this too.

Cmike2780 · 06-21-2010, 10:38 PM

Did you piss anyone off at work?

KingZee · 06-22-2010, 02:12 AM

When I had my A4 years ago I noticed a very similar dent on the front fender at a car wash right after the car was washed. I was convinced that they had done it but when we reviewed the tapes we didn't see anything that could've happened. I wonder if these cameras are setup so that they don't catch these things? lol...In reality it's probably the dirt covering up the dent though, once it's washed it stands out.

That's on the drivers side though, you didn't notice that huge thing before getting into the car?

Sucks either way, hope they can remove that without major work.

k20z3 · 06-22-2010, 02:16 AM

Quote:

Originally Posted by tjlazer

You can try a hair dryer and Compressed air! It wont hurt the paint, worth a try!

&fs=1" width="644" height="390">

&fs=1" />

">http://www.youtube.com/watch?v=

doesnt work tried it. along time ago

Boost_lee · 06-22-2010, 03:01 AM

I had the same results - didn't work for me, but it was a rather large q-panel dent.

tjlazer · 06-22-2010, 10:59 AM

Take it to a pro PDR, they will fix that up no problem...

Smallywood · 06-22-2010, 01:22 PM

Someone cleaning your car decided to lean against your fender while washing the rocker panel or bumper near the bottom, the weight of their fat caused the fender to push in. Definately looks like a dent from a lazy fat car wash worker...

06-21-2010, 07:48 PM	#23 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	You can try a hair dryer and Compressed air! It wont hurt the paint, worth a try! __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV Last edited by tjlazer; 06-22-2010 at 10:58 AM.

06-21-2010, 10:38 PM	#25 (permalink)
Cmike2780 A True Z Fanatic Join Date: Jun 2010 Location: Long Island Posts: 5,059 Drives: slowwww Rep Power: 28	Did you piss anyone off at work? __________________ [09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R] [ArchitTEK Photography]

06-22-2010, 10:59 AM	#29 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	Take it to a pro PDR, they will fix that up no problem... __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

06-22-2010, 01:22 PM	#30 (permalink)
Smallywood Track Member Join Date: Jul 2009 Location: Central Ohio Posts: 501 Drives: 12 GT-R BlackEdition Rep Power: 16	Someone cleaning your car decided to lean against your fender while washing the rocker panel or bumper near the bottom, the weight of their fat caused the fender to push in. Definately looks like a dent from a lazy fat car wash worker... __________________ Last edited by Smallywood; 06-22-2010 at 06:42 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
(Video)NoGood's NEWSOwners Outraged After Vandalized Car is Towed	nogoodname	The Lounge (Off Topic)	31	08-18-2010 07:46 PM
New camaro vandalized in driveway	frost	The Lounge (Off Topic)	55	06-20-2009 10:55 PM

06-20-2010, 04:46 PM	#18 (permalink)
quagmire87 Enthusiast Member Join Date: Oct 2009 Location: chicago illinois Posts: 428 Drives: 09 370z Bs Mt Rep Power: 15	do a paintless dent repair. it seems that there are not scratches and its good to do it. or do it yourself with a towel and a pry bar by taking the panels apart. good luck!

06-20-2010, 06:14 PM	#21 (permalink)
v8zracer260z Base Member Join Date: Mar 2010 Location: Micanopy Posts: 124 Drives: 09 370Z blk touring Rep Power: 15	I agree do not attempt the repair yourself it will make it impossible for a PDR tech to repair. From looking at the pics it may be possible to repair via PDR the tricky part wil be the wheel arch area as body line significantly strengthen the metal making PDR difficult also that area has limited tool access due to the inner wheel well meeting the outer sheetmetal.

06-21-2010, 07:28 PM	#22 (permalink)
drdre8424 Base Member Join Date: Mar 2009 Location: https://t.me/pump_upp Posts: 133 Drives: 09 Pearl 370z Auto Rep Power: 0	thats a bad day!

06-22-2010, 02:12 AM	#26 (permalink)
KingZee A True Z Fanatic Join Date: Feb 2010 Location: Glendale, CA Age: 40 Posts: 2,612 Drives: Focus ST Rep Power: 423	When I had my A4 years ago I noticed a very similar dent on the front fender at a car wash right after the car was washed. I was convinced that they had done it but when we reviewed the tapes we didn't see anything that could've happened. I wonder if these cameras are setup so that they don't catch these things? lol...In reality it's probably the dirt covering up the dent though, once it's washed it stands out. That's on the drivers side though, you didn't notice that huge thing before getting into the car? Sucks either way, hope they can remove that without major work.

06-22-2010, 03:01 AM	#28 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 29	I had the same results - didn't work for me, but it was a rather large q-panel dent.