What did you do with your Z today

BeachZTT · 09-10-2011, 08:27 PM

Sorry to hear about all the Z carnage today. Hope you all get your issues worked out without too much trouble.

Well, went to work on the BMW and expected a full day or pulling ferrings, plugs, and fuel lines. Bike stays plugged in all the time with a "battery tender" like complete charging system... on on the second hit of the button she came to life. Checked the fluids, topped off the front brake resivoir and she is 100%. Wife and I took my parents out to dinner. We took the beemer and they drove the roadster for the first time. We all had a blast!!!

Gotta say it... the Stang looks sick! Nicely done!

bacalhau16 · 09-10-2011, 08:29 PM

Washed and waxed mine today. Was much needed.

Fire · 09-10-2011, 11:29 PM

Congrats Red on your yawn Rustange yawn . Atleast you have your WRX to drive.

kenchan · 09-11-2011, 07:18 AM

Luna- that's pretty typical unless u remove the weights before taking the wheels in. They use a screw driver and razor to remove old weights.

Beach -

on the bike!

Going to pull out my z in 30.

gurneyeagle · 09-11-2011, 07:56 AM

Quote:

Originally Posted by Red__Zed

Yep. It's a sweet ride

Congrats Red!

Hope you stay on the Board; you've been a great contributor.

LunaZ · 09-11-2011, 08:06 AM

Quote:

Originally Posted by kenchan

Luna- that's pretty typical unless u remove the weights before taking the wheels in. They use a screw driver and razor to remove old weights.

Typical don't make it right.

onzedge · 09-11-2011, 09:08 AM

Quote:

Originally Posted by gurneyeagle

Congrats Red!

Hope you stay on the Board; you've been a great contributor.

moto_italia · 09-11-2011, 09:23 AM

Today, installed a Country Joe Crafts radar detector mirror mount, and wired it into the powered mirror with an Invisicord wire. Ten minute job - so easy!
valentine radar detector mount
Invisicord Products

onzedge · 09-11-2011, 09:53 AM

Quote:

Originally Posted by moto_italia

Today, installed a Country Joe Crafts radar detector mirror mount, and wired it into the powered mirror with an Invisicord wire. Ten minute job - so easy!
valentine radar detector mount
Invisicord Products

BeachZTT · 09-11-2011, 09:55 AM

After I get my lawn work done today, I hope to give the Zs a bath!

Quote:

Originally Posted by kenchan

Beach -

on the bike!
Going to pull out my z in 30.

Thanks Ken! Here is a quick shot after I knocked all the dust off of her.

Quote:

Originally Posted by gurneyeagle

Congrats Red!

Hope you stay on the Board; you've been a great contributor.

Thirded!

Quote:

Originally Posted by LunaZ

Typical don't make it right.

^^^ What he said!!!

Red__Zed · 09-11-2011, 09:59 AM

Quote:

Originally Posted by gurneyeagle

Congrats Red!

Hope you stay on the Board; you've been a great contributor.

I plan to stick around and help out as much as I can. This is one of the better forums I've been on.

onzedge · 09-11-2011, 10:03 AM

Quote:

Originally Posted by Red__Zed

I plan to stick around and help out as much as I can. This is one of the better forums I've been on.

We look forward to hearing about your continued adventures.

Fire · 09-11-2011, 10:09 AM

Kewl cruiser Beach. You have a second topless cruiser.

kenchan · 09-11-2011, 10:13 AM

Quote:

Originally Posted by LunaZ

Typical don't make it right.

No it doesn't. Just something we learn from experience....sadly.

Beach- nice!

Motored my Z this am. Was a great drive.

onzedge · 09-11-2011, 10:18 AM

Quote:

Originally Posted by kenchan

No it doesn't. Just something we learn from experience....sadly.

Beach- nice!

Motored my Z this am. Was a great drive.

09-10-2011, 08:27 PM	#6256 (permalink)
BeachZTT Track Member Join Date: Jul 2009 Location: Colorado Posts: 746 Drives: '10 BC ZR T/S/Nav Rep Power: 16	Sorry to hear about all the Z carnage today. Hope you all get your issues worked out without too much trouble. Well, went to work on the BMW and expected a full day or pulling ferrings, plugs, and fuel lines. Bike stays plugged in all the time with a "battery tender" like complete charging system... on on the second hit of the button she came to life. Checked the fluids, topped off the front brake resivoir and she is 100%. Wife and I took my parents out to dinner. We took the beemer and they drove the roadster for the first time. We all had a blast!!! Gotta say it... the Stang looks sick! Nicely done! __________________ '10 ZR Black Cherry Sport/Touring/Nav, Swift Springs, Stillen G3s, 15mm-F 20mm-R Spacers, SPC, Spoiler Solutions Rear Wing, Stubby Antenna

09-10-2011, 11:29 PM	#6258 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 42	Congrats Red on your yawn Rustange yawn . Atleast you have your WRX to drive. __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

09-11-2011, 09:23 AM	#6263 (permalink)
moto_italia Base Member Join Date: Jun 2011 Location: Tennessee Posts: 131 Drives: 40th Anniversary Rep Power: 13	Today, installed a Country Joe Crafts radar detector mirror mount, and wired it into the powered mirror with an Invisicord wire. Ten minute job - so easy! valentine radar detector mount Invisicord Products __________________ Kevin Borla CBE + Z1 Post-MAF Tubes + AFE Dropins + Llumar CTX35

09-11-2011, 10:09 AM	#6268 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 42	Kewl cruiser Beach. You have a second topless cruiser. __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 05:14 PM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 03:03 PM
Just got it Today 6/14/09 :D!!!!	COD4	New 370Z Owner	15	06-21-2009 04:22 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM

09-10-2011, 08:29 PM	#6257 (permalink)
bacalhau16 Base Member Join Date: Jun 2011 Location: palm coast Posts: 108 Drives: 2013 nissan 370z Rep Power: 13	Washed and waxed mine today. Was much needed.

09-11-2011, 07:18 AM	#6259 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	Luna- that's pretty typical unless u remove the weights before taking the wheels in. They use a screw driver and razor to remove old weights. Beach - on the bike! Going to pull out my z in 30.