What did you do with your Z today

sojirovskensi · 06-30-2011, 11:06 PM

Uprev done!

RC 370z · 07-01-2011, 10:07 AM

gave her a nice wash and wax

Super Tanooki · 07-01-2011, 10:59 AM

Thanks Ken

Took ages to get the measurements right and manually cut a good template. Worked out though.

TWYNBYZ · 07-01-2011, 11:03 AM

Door handles have been removed and are getting painted.....

kenchan · 07-01-2011, 11:14 AM

Quote:

Originally Posted by Super Tanooki

Thanks Ken

Took ages to get the measurements right and manually cut a good template. Worked out though.

yah, wat i do is take a blank sheet of paper and a stylus to get the basic outline. then i use my pen and scissors to trim the paper to size to make the template.

sometimes i cut too much and so use masking tape on the template and recut.

the b-pillar template took me only a few min to make using this technique.

Crazy4Z · 07-01-2011, 03:40 PM

Changed the oil.

kenchan · 07-01-2011, 04:04 PM

Quote:

Originally Posted by Crazy4Z

Changed the oil.

cool. i got a 5qt jug of Mobil1 waiting for my Z.

said the Z.

onzedge · 07-01-2011, 04:54 PM

Quote:

Originally Posted by kenchan

cool. i got a 5qt jug of Mobil1 waiting for my Z.

said the Z.

I used Mobil 1 for two oil changes and I do not think I want to use it anymore. After about 2,000 miles, my engine was a bit noisy when idling. I never have the issue with Red Line and am going back to it (or maybe Eneos).

Have a safe 4th, Mr. Kenchan. Don't blow off any of your fingers with the fireworks -- it would hamper your shifting ablity.

xdeslitx · 07-01-2011, 05:00 PM

Quote:

Originally Posted by onzedge

I used Mobil 1 for two oil changes and I do not think I want to use it anymore. After about 2,000 miles, my engine was a bit noisy when idling. I never have the issue with Red Line and am going back to it (or maybe Eneos).

Have a safe 4th, Mr. Kenchan. Don't blow off any of your fingers with the fireworks -- it would hamper your shifting ablity.

I started using Eneos ...switched from mobil 1

onzedge · 07-01-2011, 05:14 PM

Quote:

Originally Posted by xdeslitx

I started using Eneos ...switched from mobil 1

How is the Eneos?

happytheman · 07-01-2011, 04:57 PM

Yes it would hinder his motoring, wouldn't it? I wonder..is Kenchan a palm shifter or a shaft shifter? If it's the former..he might do ok!

Econ · 07-01-2011, 05:24 PM

my springs came!!!

overnight ftw

Red__Zed · 07-01-2011, 05:24 PM

Quote:

Originally Posted by Econ

my springs came!!!

overnight ftw

When you getting them installed?

kenchan · 07-01-2011, 06:46 PM

Quote:

Originally Posted by onzedge

I used Mobil 1 for two oil changes and I do not think I want to use it anymore. After about 2,000 miles, my engine was a bit noisy when idling. I never have the issue with Red Line and am going back to it (or maybe Eneos).

Have a safe 4th, Mr. Kenchan. Don't blow off any of your fingers with the fireworks -- it would hamper your shifting ablity.

Really? Hummmmm...I've been using this stuff on my Z and G and past cars for like a decade. No issue with noise.

Have a nice 4th too, mr.onzedge!

yes, I will ensure to hold the fireworks in my mouth while motoring.

.

Quote:

Originally Posted by happytheman

Yes it would hinder his motoring, wouldn't it? I wonder..is Kenchan a palm shifter or a shaft shifter? If it's the former..he might do ok!

Hahahaha!

I think I am a palm shifter.

Quote:

Originally Posted by Econ

my springs came!!!

overnight ftw

Woah! That was fast!

Econ · 07-01-2011, 06:12 PM

tomorrow morning!

07-01-2011, 10:07 AM	#2 (permalink)
RC 370z Base Member Join Date: Jun 2011 Location: GA Posts: 106 Drives: 2011 370Z Black 7MT Rep Power: 15	gave her a nice wash and wax __________________ 2011 370Z Magnetic Black 7AT. E, ' \' ' ,F

07-01-2011, 11:03 AM	#4 (permalink)
TWYNBYZ Base Member Join Date: Jan 2011 Location: S. Cali Posts: 229 Drives: 2013 Pearl White GTR Rep Power: 15	Door handles have been removed and are getting painted..... __________________ 2013 Pearl White GTR

07-01-2011, 04:57 PM	#11 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1823	Yes it would hinder his motoring, wouldn't it? I wonder..is Kenchan a palm shifter or a shaft shifter? If it's the former..he might do ok! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

07-01-2011, 05:24 PM	#12 (permalink)
Econ A True Z Fanatic Join Date: Jan 2011 Location: New York City Posts: 2,546 Drives: Fiat? Rep Power: 20	my springs came!!! overnight ftw __________________ 2014 Triumph Thruxton 900 2013 Fiat 500 Abarth 2009 Nissan 370z

07-01-2011, 06:12 PM	#15 (permalink)
Econ A True Z Fanatic Join Date: Jan 2011 Location: New York City Posts: 2,546 Drives: Fiat? Rep Power: 20	tomorrow morning! __________________ 2014 Triumph Thruxton 900 2013 Fiat 500 Abarth 2009 Nissan 370z

06-30-2011, 11:06 PM	#1 (permalink)
sojirovskensi Enthusiast Member Join Date: Sep 2010 Location: Dallas Texas Posts: 287 Drives: 10 Nissan 370z Wh M6 Rep Power: 15	Uprev done!

07-01-2011, 10:59 AM	#3 (permalink)
Super Tanooki Base Member Join Date: Jul 2010 Location: Las Vegas Posts: 217 Drives: 370Z MT Base/Spt Red Rep Power: 16	Thanks Ken Took ages to get the measurements right and manually cut a good template. Worked out though.

07-01-2011, 03:40 PM	#6 (permalink)
Crazy4Z Base Member Join Date: Apr 2011 Location: Long Beach Posts: 185 Drives: Nissan 370Z NISMO BS Rep Power: 15	Changed the oil.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 05:14 PM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 03:03 PM
Just got it Today 6/14/09 :D!!!!	COD4	New 370Z Owner	15	06-21-2009 04:22 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM