What did you do with your Z today

kenchan · 05-05-2011, 01:00 PM

hail blanket or a dust cover?

98intrigue · 05-06-2011, 09:09 AM

Quote:

Originally Posted by kenchan

hail blanket or a dust cover?

Neither...turbo blanket

kenchan · 05-06-2011, 10:08 AM

Quote:

Originally Posted by Lemers

Shift knob? What kind?

not fully decided yet...

probably either the TWM or the PWJDM.

the issue is not really in my Z cause i only take her out on weekends, but in my G which has a metal TWM knob right now.. it gets SUPERHOT while parked at the office in the sun so i want to use my Z's knob on the G and get a new knob for the Z. (i distroyed my G's knob while removing it back like 6yrs ago.

)

Quote:

Originally Posted by 98intrigue

Neither...turbo blanket

ooooo~... that's a blanket we dont hear about too often.

kenchan · 05-06-2011, 06:44 AM

Yesterday gotz me a strap wrench... guys know where this is heading.

Lemers · 05-06-2011, 06:50 AM

Quote:

Originally Posted by kenchan

Yesterday gotz me a strap wrench... guys know where this is heading.

Shift knob? What kind?

JohnsZ · 05-06-2011, 08:46 AM

As luck would have it, now that the weather has warmed up here in the Northeast, I hurt my back from lifting an amplifier and now am watching my Z sit in the garage. So for all of you out there over 50 or have back problems, here's my advice; DRIFT...DON'T LIFT! Have fun with your Zs, I'll be back in the saddle soon!

Fire · 05-06-2011, 08:57 AM

Took pics of my sticker mounted on the wind deflector. Yes the glass needs cleaning too LOL. Let me knwo what you think of my modded sticker. The camera is a HP Photosmart E317. Sorry not as good as you pros out there

kenchan · 05-06-2011, 04:13 PM

ordered up a roll of Xpel protector 7ft x 4" wide to do the side of the car.

i found some minor kickup chips on the very bottom 3" of the car from when i was running 20mm spacers up front on stock 19's.

i measued 6ft each side and didnt feel like paying $190 for the pre-cut side pieces from autopaintguard.com so got the generic roll for less than $50 shipped.

will trim to shape and squeegee on.

onzedge · 05-06-2011, 05:03 PM

Quote:

Originally Posted by kenchan

ordered up a roll of Xpel protector 7ft x 4" wide to do the side of the car.

i found some minor kickup chips on the very bottom 3" of the car from when i was running 20mm spacers up front on stock 19's.

i measued 6ft each side and didnt feel like paying $190 for the pre-cut side pieces from autopaintguard.com so got the generic roll for less than $50 shipped.

will trim to shape and squeegee on.

Cool.

happytheman · 05-07-2011, 01:09 PM

Quote:

Originally Posted by kenchan

ordered up a roll of Xpel protector 7ft x 4" wide to do the side of the car.

i found some minor kickup chips on the very bottom 3" of the car from when i was running 20mm spacers up front on stock 19's.

i measued 6ft each side and didnt feel like paying $190 for the pre-cut side pieces from autopaintguard.com so got the generic roll for less than $50 shipped.

will trim to shape and squeegee on.

Have you put paint protector on before? If so, can you tell me how difficult/easy it is? I've been considering get the pre-cut kit fir the front end.

kenchan · 05-07-2011, 01:28 PM

Quote:

Originally Posted by happytheman

Have you put paint protector on before? If so, can you tell me how difficult/easy it is? I've been considering get the pre-cut kit fir the front end.

Yep I do my own clearbra install so putting on a slap of straight clear is very easy.
I think this site still has how to but anyway, the biggest tip of the day is ALWAYS keep your finger tips wet with solution when handling the adhesive side.

otherwise you get permanent finger prints on the clearbra.

Auto Paint Guard Inc. Tampa Florida Clear Bra 3M Paint Protection Film Car Bras

98intrigue · 05-06-2011, 05:17 PM

Found out my fabricators shop was out of power for a few hours today...now the car won't be finished until late Monday. Possible tuning Tuesday.

Dembflyr · 05-06-2011, 05:52 PM

Quote:

Originally Posted by 98intrigue

Found out my fabricators shop was out of power for a few hours today...now the car won't be finished until late Monday. Possible tuning Tuesday.

Bummer.

kenchan · 05-06-2011, 06:29 PM

Yah, actually that's 17ft x 4" for $50 shipped.

. (Typo)

Fire · 05-06-2011, 07:47 PM

Went to the paint shop cause I was in town. I took my rear wing in Wed. for paint and the said it would be done today. Sitting right where I set it was my untouched wing. WTF now they said it would be donee Mon so I told them I would pick it up Wed. Doesn't anybody stick to promissed delivery times? Why do we ask for projected finish times?

05-06-2011, 08:46 AM	#6 (permalink)
JohnsZ Enthusiast Member Join Date: Mar 2011 Location: Connecticut Posts: 374 Drives: '09 370Z Tour CY M6 Rep Power: 16	Oh my aching back !!! As luck would have it, now that the weather has warmed up here in the Northeast, I hurt my back from lifting an amplifier and now am watching my Z sit in the garage. So for all of you out there over 50 or have back problems, here's my advice; DRIFT...DON'T LIFT! Have fun with your Zs, I'll be back in the saddle soon!

05-06-2011, 05:17 PM	#12 (permalink)
98intrigue A True Z Fanatic Join Date: Jul 2010 Location: Clearwater, FL Age: 41 Posts: 4,855 Drives: 2014 Viper Rep Power: 432	Found out my fabricators shop was out of power for a few hours today...now the car won't be finished until late Monday. Possible tuning Tuesday. __________________ Ryan - 2014 Stryker Green Viper Gone - a few Vipers and a couple turbo VQs

05-06-2011, 07:47 PM	#15 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 44	Went to the paint shop cause I was in town. I took my rear wing in Wed. for paint and the said it would be done today. Sitting right where I set it was my untouched wing. WTF now they said it would be donee Mon so I told them I would pick it up Wed. Doesn't anybody stick to promissed delivery times? Why do we ask for projected finish times? __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 05:14 PM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 03:03 PM
Just got it Today 6/14/09 :D!!!!	COD4	New 370Z Owner	15	06-21-2009 04:22 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM

05-05-2011, 01:00 PM	#1 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	hail blanket or a dust cover?

05-06-2011, 06:44 AM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	Yesterday gotz me a strap wrench... guys know where this is heading.

05-06-2011, 04:13 PM	#8 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	ordered up a roll of Xpel protector 7ft x 4" wide to do the side of the car. i found some minor kickup chips on the very bottom 3" of the car from when i was running 20mm spacers up front on stock 19's. i measued 6ft each side and didnt feel like paying $190 for the pre-cut side pieces from autopaintguard.com so got the generic roll for less than $50 shipped. will trim to shape and squeegee on.

05-06-2011, 06:29 PM	#14 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	Yah, actually that's 17ft x 4" for $50 shipped. . (Typo)