Fuel Stabilizer

BrendenZ34 · 03-02-2023, 12:10 AM

Quote:

Originally Posted by ZoomZ

I'm looking at the FSM and no drain plug is shown. They want you to siphon from fuel filler tube. (procedure for sender removal. Tank removal just states drain tank)

a. Insert hose of less than 20 mm (0.79 in) in diameter into fuel filler tube through fuel filler opening to draw
fuel from fuel filler tube.
b. Disconnect fuel filler hose from fuel filler tube. Refer to FL-11, "
Exploded View".
c. Insert fuel tube into fuel tank through fuel filler hose to draw fuel from fuel tank.

So that can be done without dropping the tank out? Through the filler tube as in the gas cap hole? I'll see if I can find what your talking about is there a specific place you found that?

Sent from my Pixel 6 Pro using Tapatalk

ZoomZ · 03-02-2023, 01:36 PM

Quote:

Originally Posted by BrendenZ34

So that can be done without dropping the tank out? Through the filler tube as in the gas cap hole? I'll see if I can find what your talking about is there a specific place you found that?

Sent from my Pixel 6 Pro using Tapatalk

Yes. They go as far as disconnecting the Filler (the end you see) from the hose that connects directly to tank.

As above comment states, you should just be able to siphon from filler without disconnecting anything.

If you have issues with hose going all the way into tank, then you may have to disconnect things.

I'm sure there are youtube videos you can watch.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: GTM Fuel Pump Voltage Stabilizer installation	wind.zero	DIY Section (Do-It-Yourself)	6	04-24-2017 10:12 AM
Winter storage / fuel stabilizer	Darwins Child	Canada	31	11-04-2016 11:03 AM
[FOR SALE] (BNIB) GTM Fuel Pump Stabilizer Kit	BlkNismo	Parts for sale (Private Classifieds)	29	03-15-2016 05:31 AM
Fuel Pump voltage stabilizer (GTM) kit? question..	snowsurfdirtx	Forced Induction	1	03-08-2014 05:10 AM
Frame Stabilizer Bolt?	rhd	Brakes & Suspension	7	02-25-2013 11:20 AM