What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

redondoaveb · 05-14-2020, 04:28 PM

Quote:

Originally Posted by TheFLiP

Right on. It's what I figured after digging through the forum a few more hours. The 2012 manual doesn't give the wire color code of the Yaw Sensor

Thanks, man

Sent from my SM-G975U using Tapatalk

You're welcome. I actually double checked the wiring with a multimeter to verify the yaw sensor wire and ground.

Z_ealot · 05-14-2020, 05:02 PM

Quote:

Originally Posted by alcheng

the Z is actually a very reliable car, ok, besides all those talk about Steering lock and CSC (if you have a MT).

Mine's getting close to 200km on the odometer, besides the problem I've got from the convertible top...

Otherwise everything is running well.

Both those things were the first to be fixed almost immediately after i picked her up from the dealer lol kinda sad that i can't drive her right now cause I'm still waiting on the parts to show up

alcheng · 05-14-2020, 05:08 PM

Quote:

Originally Posted by Z_ealot

Both those things were the first to be fixed almost immediately after i picked her up from the dealer lol kinda sad that i can't drive her right now cause I'm still waiting on the parts to show up

for the steering, you better pull the fuse after they replace with a new one, or is it possible for them to delete it?

Mine's a 2011 and it doesn't have the steering lock.

For the CSC, are you also getting another OEM one? Otherwise, you might want to get an heavy duty one from ZSpeed or the CSC elimination kit.

Have the spark plugs been replaced? might as well do it, the plugs are expensive though, but they a long time.

Z_ealot · 05-14-2020, 05:26 PM

Quote:

Originally Posted by alcheng

for the steering, you better pull the fuse after they replace with a new one, or is it possible for them to delete it?

Mine's a 2011 and it doesn't have the steering lock.

For the CSC, are you also getting another OEM one? Otherwise, you might want to get an heavy duty one from ZSpeed or the CSC elimination kit.

Have the spark plugs been replaced? might as well do it, the plugs are expensive though, but they a long time.

The parts I'm waiting for are the idler pulley and automatic tensioner, pulled the fuse for the steering lock a long time ago along with swapping out the csc for a zspeed hd csc and new master cylinder, sorry if it sounded like something else lol

alcheng · 05-14-2020, 05:35 PM

Quote:

Originally Posted by Z_ealot

The parts I'm waiting for are the idler pulley and automatic tensioner, pulled the fuse for the steering lock a long time ago along with swapping out the csc for a zspeed hd csc and new master cylinder, sorry if it sounded like something else lol

basically you've done what has to be done.

have you done anything on the brakes?

Z_ealot · 05-14-2020, 06:29 PM

Quote:

Originally Posted by alcheng

basically you've done what has to be done.

have you done anything on the brakes?

Stoptech pads all around and slotted rotors with motul rbf600 for the fluid, went with a less aggressive setup since i do also daily drive it and didn't want something that would create too much dust but still improve on the stopping power of the Akebono calipers

Z_ealot · 05-14-2020, 08:25 PM

Just an addendum to my original post on the health of the motor, i did do my own compression test doing it the normal way after heating up the engine to running temps and measured 210 psi across all 6 cylinders dry, not sure how big a discrepancy there normally is between gauges as mine is a bluedriver gauge and im not sure what the dealer was using. mostly just went in to have them perform a leak down test as i dont have access to that equipment and even if i did the place where i live wouldnt allow me to use it lol

ABUNAI NISMO · 05-14-2020, 08:35 PM

I had a very difficult time with the clutch assembly. I am 6 feet tall and about 245. I had a tremendous time squeezing in this space to get it done. Clutch feels great!
I also got to finally install the hotchkis sway bar (front) and Hotchkis billet brackets today too! I tested it out a bit afterward and it is by far the best upgrade thus far! It is a world of difference (highly recommend)

Hope everyone is safe and making good choices! Have a great evening!

BettyZ · 05-14-2020, 11:46 PM

Aside from the endless fitting process for the CF hood and Aerocatch pins... was annoyed enough w this to finally deal with it. A little sandpaper, fatal corrosive agent, and voila!

Sent from my SM-G955U using Tapatalk

Rusty · 05-15-2020, 12:22 AM

Quote:

Originally Posted by BettyZ

Aside from the endless fitting process for the CF hood and Aerocatch pins... was annoyed enough w this to finally deal with it. A little sandpaper, fatal corrosive agent, and voila!

Sent from my SM-G955U using Tapatalk

I painted my crash bar with black plasti dip. When you look into my grill area. It looks like a black hole.

BettyZ · 05-15-2020, 01:31 PM

I see jar's last mod is in the tags

JARblue · 05-15-2020, 01:45 PM

Quote:

Originally Posted by BettyZ

I see jar's last mod is in the tags

Ew... those things stink

I prefer to go without deodorant for a few days for that au natural musk

ABUNAI NISMO · 05-15-2020, 08:43 PM

Installed the Hotchkis rear sway bar today. This bar is adjustable. The hole on the very end is for the stiffest setting. The 3rd hole farthest from the end of the bar is for the softest. I used the middle hole! I also installed the Bell Raceworks differential brace too! I might as well have since I was down there anyhow!

The build is coming along. Slow but sure! I hope to 50% complete by the end of 2020!

WISHLIST

19X9.5
19X10.5 OMARI SPEC LMGT4 (gloss or satin black no preference)

Tractionless · 05-16-2020, 11:09 AM

Quote:

Originally Posted by alcheng

the Z is actually a very reliable car, ok, besides all those talk about Steering lock and CSC (if you have a MT).

Mine's getting close to 200km on the odometer, besides the problem I've got from the convertible top...

Otherwise everything is running well.

You're forgetting the POS plastic fuel hat, thin paint and cracking dash's.......at a minimum.

Z_ealot · 05-16-2020, 12:13 PM

Quote:

Originally Posted by Tractionless

You're forgetting the POS plastic fuel hat, thin paint and cracking dash's.......at a minimum.

Mines an 09, seen plenty of summers off 100 plus heat and no issues with the dash.... of course maybe that has something to do with my use of chemical guys protectant... other than that the 370 is experiencing pretty much a lot of the same issues as the original 240Z when it comes to quality over time lol

05-14-2020, 11:46 PM	#4734 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: USA Age: 38 Posts: 5,260 Drives: A Garage Queen Rep Power: 2684371	Aside from the endless fitting process for the CF hood and Aerocatch pins... was annoyed enough w this to finally deal with it. A little sandpaper, fatal corrosive agent, and voila! Sent from my SM-G955U using Tapatalk Hotrodz, Ghostvette, old guy and 2 others like this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

05-15-2020, 01:31 PM	#4736 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: USA Age: 38 Posts: 5,260 Drives: A Garage Queen Rep Power: 2684371	I see jar's last mod is in the tags JARblue and Rusty like this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM

05-14-2020, 08:25 PM	#4732 (permalink)
Z_ealot A True Z Fanatic Join Date: Sep 2010 Location: Albuquerque, NM Posts: 2,045 Drives: 09 370Z Touring/Sprt Rep Power: 10091	Just an addendum to my original post on the health of the motor, i did do my own compression test doing it the normal way after heating up the engine to running temps and measured 210 psi across all 6 cylinders dry, not sure how big a discrepancy there normally is between gauges as mine is a bluedriver gauge and im not sure what the dealer was using. mostly just went in to have them perform a leak down test as i dont have access to that equipment and even if i did the place where i live wouldnt allow me to use it lol