What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

Hotrodz · 06-12-2019, 09:25 AM

Quote:

Originally Posted by JARblue

I'm just wondering how high it can get... I'm not sure it will be enough to roll out the transmission sitting on the transmission jack from under the car. In which case, it's probably not worth it to me.

I can get the car up on four jack stands without much effort now. The minimal hassle saved with a QJ just doesn't seem worth a $1300+ investment. Especially when I consider that I can get a 2 post lift for an 8' tall garage for $1700.

I got mine for $999 on line from Costco! It is much safer than Jack stands too. Not sure about the height of the lift yet. You are young and don't have deal with bad knees and hips lol.

Sent from my SM-G965U using Tapatalk

JARblue · 06-12-2019, 09:36 AM

Quote:

Originally Posted by Hotrodz

I got mine for $999 on line from Costco! It is much safer than Jack stands too. Not sure about the height of the lift yet. You are young and don't have deal with bad knees and hips lol.

I don't have a Costco card. Home Depot has it for $1099. Plus $97 for large blocks. Plus $85 for pinch weld blocks. Plus $85 for portable power if I wanted to take it on the road. It adds up.

I'm not convinced it's any safer than jack stands. Anything can fail...

abm89 · 06-12-2019, 09:37 AM

Quote:

Originally Posted by JARblue

Which hilly turns did you hit up?

I can't disclose that. I don't want people getting in the way lol.

JARblue · 06-12-2019, 09:40 AM

Quote:

Originally Posted by abm89

I can't disclose that. I don't want people getting in the way lol.

I've got a few of those as well

Hotrodz · 06-12-2019, 09:46 AM

Quote:

Originally Posted by JARblue

I don't have a Costco card. Home Depot has it for $1099. Plus $97 for large blocks. Plus $85 for pinch weld blocks. Plus $85 for portable power if I wanted to take it on the road. It adds up.

I'm not convinced it's any safer than jack stands. Anything can fail...

I'm not trying to talk you into getting one. Mine came with large and small blocks so I don't have to buy them.

You got to do what is good for you. I have used Jack stands all my life without fail so you have no argument from me.

Sent from my SM-G965U using Tapatalk

JARblue · 06-12-2019, 09:48 AM

Didn't realize it came with blocks. I would assume the retail package from Home Depot is the same. I'm trying to convince myself I don't need one. Because I'll probably end up with a 2 post lol.

BettyZ · 06-12-2019, 10:23 AM

Quote:

Originally Posted by Hotrodz

I'm not trying to talk you into getting one. Mine came with large and small blocks so I don't have to buy them.

You got to do what is good for you. I have used Jack stands all my life without fail so you have no argument from me.

Sent from my SM-G965U using Tapatalk

Large blocks are redundant once you get the pinch weld blocks; you wont be able to stack both underneath. You can fit the pinch blocks on the small blocks. I was worried ab keeping the pinch and small blocks aligned with each other during the lifting process so I duct taped them together.

Sent from my SM-G955U using Tapatalk

Hotrodz · 06-12-2019, 10:27 AM

Quote:

Originally Posted by BettyZ

Large blocks are redundant once you get the pinch weld blocks; you wont be able to stack both underneath. You can fit the pinch blocks on the small blocks. I was worried ab keeping the pinch and small blocks aligned with each other during the lifting process so I duct taped them together.

Sent from my SM-G955U using Tapatalk

Good to know and thanks for the advice!

Sent from my SM-G965U using Tapatalk

Hotrodz · 06-12-2019, 10:33 AM

Quote:

Originally Posted by JARblue

Didn't realize it came with blocks. I would assume the retail package from Home Depot is the same. I'm trying to convince myself I don't need one. Because I'll probably end up with a 2 post lol.

LMAO, you are way more mechanically inclined than me and do your own wrenching so it would make sense. It's that whole thing of I have got by without it and for $1200 I can buy more parts for the car! Any more I compare everything to a set of $1300 set of tires that are no good after three track weekends or less! So the lift was a no brainer.

Sent from my SM-G965U using Tapatalk

Ghostvette · 06-12-2019, 11:09 AM

Quote:

Originally Posted by JARblue

Didn't realize it came with blocks. I would assume the retail package from Home Depot is the same. I'm trying to convince myself I don't need one. Because I'll probably end up with a 2 post lol.

I'd love to have either a lift or a QJ, but at those prices, I can buy either more car parts or things that go 'boom'....

redondoaveb · 06-12-2019, 11:59 AM

I had my steering wheel wrapped in full alcantara with red stitching.

cv129 · 06-12-2019, 12:23 PM

Especially for a lowered Z, and eeeeessssspecialy with the longer 09-14 Nismo front overhang, it’s great luxury to be able to get all 4 wheels off the ground quickly. For my car (lowered 09 Nismo), even with a long reach flat low profile jack, it’s such a drag to:

-get the car on some kind of block to raise up the front
-then jack up the front
-place jack stand
-then jack the rear
-place jack stand

Someday I’ll get one of these fancy QJ or a 2 post lift...some day in the unknown distant future lol.

bunk · 06-12-2019, 12:25 PM

The biggest pain the @ss about the qj is theyre so freakin heavy.

Zingston · 06-12-2019, 12:40 PM

Quote:

Originally Posted by Dynamis

Sorry, i wasnt clear. Pull out the interior black part or leave.
https://photos.app.goo.gl/kF7YEQyk6bspRfdQ6

My replacements didn't have the black interior part... If they had, I would have removed them.

cv129 · 06-12-2019, 12:41 PM

Quote:

Originally Posted by bunk

The biggest pain the @ss about the qj is theyre so freakin heavy.

Oh I can’t imagine moving it around lol. Personally, I’ll want them stationary at one spot. I’ll just park my Z over it every time. Maybe build a small incline ramp on each end.

06-12-2019, 09:48 AM	#3456 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Didn't realize it came with blocks. I would assume the retail package from Home Depot is the same. I'm trying to convince myself I don't need one. Because I'll probably end up with a 2 post lol. Hotrodz and Spooler like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

06-12-2019, 12:23 PM	#3462 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,191 Drives: 09 Nismo, 16 Nismo Rep Power: 159827	Especially for a lowered Z, and eeeeessssspecialy with the longer 09-14 Nismo front overhang, it’s great luxury to be able to get all 4 wheels off the ground quickly. For my car (lowered 09 Nismo), even with a long reach flat low profile jack, it’s such a drag to: -get the car on some kind of block to raise up the front -then jack up the front -place jack stand -then jack the rear -place jack stand Someday I’ll get one of these fancy QJ or a 2 post lift...some day in the unknown distant future lol. Rusty, Hotrodz and redondoaveb like this. __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield

06-12-2019, 12:25 PM	#3463 (permalink)
bunk A True Z Fanatic Join Date: Mar 2018 Location: Southern California Posts: 4,077 Drives: 2010 370z Roadster Rep Power: 2684369	The biggest pain the @ss about the qj is theyre so freakin heavy. cv129 and redondoaveb like this. __________________ -Drop in K&N Filter -Invidia Gemini CBE -Z1 Oil Cooler -Swift Springs - EcuTek -Forgestar F14 -SPL Camber Links -Akebono BBK Upgrade -Z1 Premium SS Lines -SPL Diff Bushings -SPL FUCAs - BellRaceworks Diff Brace

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM