What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

JARblue · 03-21-2019, 08:43 PM

Purchased SPL differential bushings from a local forum member to replace my Whiteline poly diff bushings.

abm89 · 03-22-2019, 10:20 AM

Still waiting on my wheels (probably almost done at this point). Probably going to put continentals on them.

Ghostvette · 03-22-2019, 10:32 AM

Finally.... I hate snow.....

abm89 · 03-22-2019, 04:27 PM

Quote:

Originally Posted by abm89

Still waiting on my wheels (probably almost done at this point). Probably going to put continentals on them.

LOL, I was notified they are ready to ship now.

pokeyl · 03-23-2019, 08:40 AM

I wish I could turn this over. Car is in paint!

JARblue · 03-23-2019, 09:43 AM

Here you go

onzedge · 03-23-2019, 04:17 PM

We went for a nice 50 mile drive along the Sacramento River today...

mishuko · 03-25-2019, 01:11 PM

Damn steering wheel is slightly off center. Old z same problem! Grrrrrr

Or maybe the roads suck so much im always pointing it slightly off centre... or am i.

While i wish i had a "faster acceleration" or more oomph or whatever i realize it's insurance suicide. Atleast i can use the power without getting too spirited.

Sway · 03-25-2019, 04:05 PM

Today I’m about to go install Z1 subframe bushing collars... wish me luck!

Rusty · 03-25-2019, 04:15 PM

Quote:

Originally Posted by Sway

Today I’m about to go install Z1 subframe bushing collars... wish me luck!

Piece of cake.

Sway · 03-25-2019, 04:44 PM

Quote:

Originally Posted by Rusty

Piece of cake.

Looks like it, but I’m cursed! Change a clutch? Smooth sailing. Change cams? No problem... pull motor? Done in 15 min. Air up the tires? Valve stem shoots off, hits me in the face breaking my nose and sets my hair on fire before ricocheting and killing 500 babies while the rubber of the tire shoots off at such a speed it melts into liquid form before bouncing into the exhaust, traveling into the motor and weaving in and out of each piston rod before solidifying into a subance stronger than any material known to man. While this is happening, it does so in such a matter that bends the fabric of space time uttering the brown note so loud that everyone in a 25 mile radius violently collapses sh!*ting themselves in a fit of rage enduced seizures.
Last time I changed my oil myself they made a movie about it in japan blaming a large lizard creature for all the destruction...

TLDR; Hard complicated jobs always go smoothly for me, easy jobs always have some weird freak incident no ones ever heard of that causes hours of extra time. I have bad luck.

SPDKING · 03-25-2019, 04:56 PM

Quote:

Originally Posted by Sway

Looks like it, but I’m cursed! Change a clutch? Smooth sailing. Change cams? No problem... pull motor? Done in 15 min. Air up the tires? Valve stem shoots off, hits me in the face breaking my nose and sets my hair on fire before ricocheting and killing 500 babies while the rubber of the tire shoots off at such a speed it melts into liquid form before bouncing into the exhaust, traveling into the motor and weaving in and out of each piston rod before solidifying into a subance stronger than any material known to man. While this is happening, it does so in such a matter that bends the fabric of space time uttering the brown note so loud that everyone in a 25 mile radius violently collapses sh!*ting themselves in a fit of rage enduced seizures.
Last time I changed my oil myself they made a movie about it in japan blaming a large lizard creature for all the destruction...

TLDR; Hard complicated jobs always go smoothly for me, easy jobs always have some weird freak incident no ones ever heard of that causes hours of extra time. I have bad luck.

It's the same with me, I took days to install my Stillen Sway bars took forver even though it's suppose to be less than a hour job -_-

Rusty · 03-25-2019, 05:05 PM

Quote:

Originally Posted by Sway

Looks like it, but I’m cursed! Change a clutch? Smooth sailing. Change cams? No problem... pull motor? Done in 15 min. Air up the tires? Valve stem shoots off, hits me in the face breaking my nose and sets my hair on fire before ricocheting and killing 500 babies while the rubber of the tire shoots off at such a speed it melts into liquid form before bouncing into the exhaust, traveling into the motor and weaving in and out of each piston rod before solidifying into a subance stronger than any material known to man. While this is happening, it does so in such a matter that bends the fabric of space time uttering the brown note so loud that everyone in a 25 mile radius violently collapses sh!*ting themselves in a fit of rage enduced seizures.
Last time I changed my oil myself they made a movie about it in japan blaming a large lizard creature for all the destruction...

TLDR; Hard complicated jobs always go smoothly for me, easy jobs always have some weird freak incident no ones ever heard of that causes hours of extra time. I have bad luck.

Enough said.

Sway · 03-25-2019, 05:31 PM

Quote:

Originally Posted by Rusty

Enough said.

Point taken.

I’m curious on how these are going to change things for me though. I already have a poly Z1 trans mount, Z1 poly engine mounts, white line diff bushings, kw v3 coilovers with spc front and rear camber arms. Today I’m installing the Z1 subframe collars and Spc toe bolts, tomorrow getting the car realigned. Next mod will be the Hotchkis sway bars with idk what brand front and rear endlinks. I think then my suspension/bushing work will be complete. Idk what else to do that would be worth it on an N/A car.

cthorson910 · 03-25-2019, 09:31 PM

Installed my z1 poly trans mount today and am patiently waiting for my coolerworx shifter to arrive. Ordered almost 2 weeks ago from Soho Motorsports, so I'm hoping it comes in soon.

03-21-2019, 08:43 PM	#2776 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Purchased SPL differential bushings from a local forum member to replace my Whiteline poly diff bushings. God-Speed, Hotrodz, Ghostvette and 3 others like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

03-22-2019, 10:20 AM	#2777 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,307 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	Still waiting on my wheels (probably almost done at this point). Probably going to put continentals on them. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

03-22-2019, 10:32 AM	#2778 (permalink)
Ghostvette A True Z Fanatic Join Date: Aug 2013 Location: Shawnee KS Posts: 5,698 Drives: 15 Magma Red 6MT Rep Power: 2684376	Finally.... I hate snow..... Rusty, Memphis370Z, sx moneypit and 2 others like this. __________________ 2015 Magma Red 6MT Sport Tech/2012 Fairlady MB 6MT Base (RIP 08032018)https://www.nicoclub.com/FSM/370Z/Coupe/

03-23-2019, 08:40 AM	#2780 (permalink)
pokeyl Track Member Join Date: Nov 2010 Location: DFS Posts: 891 Drives: ??? Rep Power: 54	I wish I could turn this over. Car is in paint! __________________ It's not my fault I'm old, I was born a very long time ago! Last edited by pokeyl; 03-23-2019 at 08:43 AM.

03-23-2019, 04:17 PM	#2782 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 63 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684736	We went for a nice 50 mile drive along the Sacramento River today... Rusty, Fuzzzy, mishuko and 6 others like this. __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

03-25-2019, 01:11 PM	#2783 (permalink)
mishuko A True Z Fanatic Join Date: Jul 2014 Location: bouncin on tigga Posts: 8,062 Drives: '12 Z Rep Power: 9434	Damn steering wheel is slightly off center. Old z same problem! Grrrrrr Or maybe the roads suck so much im always pointing it slightly off centre... or am i. While i wish i had a "faster acceleration" or more oomph or whatever i realize it's insurance suicide. Atleast i can use the power without getting too spirited.

03-25-2019, 04:05 PM	#2784 (permalink)
Sway Track Member Join Date: Sep 2012 Location: TX Posts: 697 Drives: 2018 GTR Rep Power: 37870	Today I’m about to go install Z1 subframe bushing collars... wish me luck! ZontheRocks likes this. __________________ - White 2018 GTR FBO+E85 - Check out my old build thread: Sway’s Journal-Hitomi ~Live and let live!~

03-25-2019, 09:31 PM	#2790 (permalink)
cthorson910 Base Member Join Date: Jan 2017 Location: CA Posts: 17 Drives: 2013 370z sport Rep Power: 8	Installed my z1 poly trans mount today and am patiently waiting for my coolerworx shifter to arrive. Ordered almost 2 weeks ago from Soho Motorsports, so I'm hoping it comes in soon. Hotrodz and Memphis370Z like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM