![]() |
Ugh, I wish I could wash my car. Not sure it's worth it with haboobs and sprinkling of rain always looming during monsoon season.
She's so dirty. :( |
1 Attachment(s)
Quote:
On the flip side, this car swallows gasoline. Car seems to be stiffly sprung, and the 21 inch wheels and low profile 265/45/21 tires don't help ride comfort at all. OEM tire size has an extremely limited selection, and many enthusiasts switch to 275/45/21. Trunk is quite small. The designer believed in form over function. It's not an SUV designed for hauling furniture. Think X6, not X5. One known problem was one of the fuel sensors malfunctioning causing gas gauge to read empty. Mine failed @ around 65k miles. There's a TSB for it and cost few hundred bucks to fix at the infiniti dealership I went to. |
changed the rear tires to new OEM Potenzas :driving:
|
Mines happily baking in the sun, and reluctantly accepting pollen deposits until this evenings daily chemical guys wipe down.
How many hear have just broken down and keep a dozen towels and two bottles of detailer spray IN the car? My options: A) Do nothing = nissan paint goes to **** in less than a year B) Wipedown every 1-3 days C) Do nothing, then be forced to claybar/polish once per month... Is this normal? How is anyone else able to "Cope" when they see crap on the paint and just not even think/worry/etc? I'm still not in that "I'll get to that some other day" mode as of yet.... Open to options on how to not go completely insane until I can get a garage for it again or a car cover.... |
Did a simple first mod, change out the ignition button for the red GTR one.
|
Quote:
|
Quote:
|
Quote:
|
Got the Z washed, waxed and detailed this morning. Then this evening ordered both upper and lower ported intake manifolds.
|
Oh yeah, also attended the Central Florida Z Club meet at the Ace Cafe in Orlando yesterday. And it was pretty cool that I got there a little early and got to park right up front with the cool guys. :tup:
https://charlest.zenfolio.com/img/s/...93385187-5.jpg https://charlest.zenfolio.com/img/s/...93385790-5.jpg https://charlest.zenfolio.com/img/s/...93385889-5.jpg |
Quote:
|
Quote:
|
Quote:
|
haven't driven my car much in about 6 weeks.. BOVs were stuck and car needed an oil change but my garage was so full of crap from the remodel I haven't been able to use it.. finally got it cleared out and got the car on stands... one BOV was full of water (not sure how that happens) and completely stuck.. got it cleaned out and lubed up but then noticed one IC inlet pipe had a hole worn through it from where it was contacting one of the front bumper/fender liner/undershroud bolts! Yikes!
|
Quote:
|
Sold both side view mirrors. Forward visibility actually improved. Rear visibility is about the same :icon17:
|
Going to take La Guaica to fuel up and get her ready for work week tomorrow.
Ian B |
Quote:
Got a tentative offer from insurance thats not terrible. Going to ask for a bit more since i feel they left some money on the table. Have a few possibilities for next car... maybe try snag a supra hmmmmmmm lol Ideally m2 Stretch realistically m240i (with m performance exhaust) Stang? Lol kid dont kill me I love that coupe life |
:ugh2:I wonder who bought those
|
Gave her a much needed bath, and some fresh indy 500's. So dang pretty, would ya just look at it. https://uploads.tapatalk-cdn.com/201...0877f59628.jpg
Sent from another dimension. |
Quote:
|
Swift springs installed and settled now. Michelin ps4’s come in tomorrow so I’ll have those mounted along with an alighnment. Really looking forward to putting these tires to the test. Car had Ventus v12’s when I purchased it which were low tread and slick. Ordered a racing bucket seat from z1 this afternoon, the stock seat is very comfortable but after sitting in my buddies Recaro seats I realized how little the Z seats hold me.
|
Reached 100K miles yesterday. Bought her 6 weeks ago with 98K. Love her as my dd while my new 2018 Camry XSE seats in the garage for out of town trips only.
Ian B |
Well I said the heck with it and ordered up a pair of ported/polished throttle bodies, bored out to 65mm to go with the match ported/polished upper and lower intakes. Figured I might as well get it all done while I'm at it. LOL
|
Great Day
Have been divorced for 3 years.Worked a long sretch with no day off.
Girlfreind is a bitch today the circus is in town if you know what I mean.I used to try to be suportive at that time of month but do care anymore. So the great day. Shined up Z.Went to range.Shot my Glock,Tarus Judge,Did some clays with Browning Citori.Drove back along river on twisty road.I get a a call on something I have wanted to buyfor last ten years.He is now ready to sell.Brownig Automacic rifle ..30-06 full auto.Then I get back to town.I'm at stop light and women in next lane compliments the car.She wants to me to pull over and wants ride in car. Life sucks but today did not. |
Quote:
|
Quote:
|
Quote:
|
Quote:
|
Quote:
|
Quote:
More Demand than supply and has to be bulit pre 1986. |
Quote:
|
Quote:
Heck, the 9th Circuit declared Hawaii's blanket ban on carry was unconstitional! If that isn't a "pigs fly" moment in American jurisprudence, I'm not sure what would qualify. PS I wanna BAR too! |
Quote:
|
Quote:
|
Today was pretty much all about the Z. Getting ready for the long weekend where i hope to lay down the fastest 1/4 iv ever ran.
Started off with taking the nitrous bottles in for a refil... $219.00 after tax for 20 lbs :bowrofl: http://www.the370z.com/members/cranb...6e0d3bc92.jpeg Then pulled the plugs to make sure i was still running in the safe zone http://www.the370z.com/members/cranb...615215d96.jpeg Forgot to mention girlfriend made me take the dogs with me http://www.the370z.com/members/cranb...74782d1e5.jpeg Got nitrous hooked back in and cleaned the beauty off. Cant wait for the first pass this weekend. http://www.the370z.com/members/cranb...ba8509156.jpeg |
1 Attachment(s)
Had the Rev9 dual exhaust installed this morning. It was $350 shipped and I hope that makes you angry. I'm happy to pay for quality, but I just had to try it since I was considering the HKS Hi-Power for 3x the price.
It's 304 stainless with mandrel bends and the shop commented that the flanges and hardware/gaskets provided were nice ones. The welds and build quality looked really good to me. They said it installed very easily and lined up without a problem. Chose Rev9 since it looked to be nicer than the other ones on eBay, didn't like how others put the helmholtz resonator's bracket on the bottom. This one puts it on top like HKS does. Also prefer dual walled stainless tips vs the single walled titanium. Was well packaged and shipped from California to Texas without issue. I was ready to hate it and buy the "real" exhaust, but... it's pretty nice. I'm very pleasantly surprised. Nice rumble at idle, no drone, quite when cruising, loud WOT, a little gargling on the overrun, but it's still breaking in so will see. :tup::driving: |
Quote:
Interesting to see how your experience differed. Mine was kinda quiet at high rpms and not beefy also made a weird air rushing sound too, no leaks. Mine also had a drone and it wasn't a nice drone, kinda like what you'd expect from a honda when you get into lower gears but higher rpms. I've since gone with another exhaust that I absolutely love that hasn't left me wanting more besides awaiting my test pipes to compliment :driving: |
Honestly I'm still on the fence with it. I wanted something that was just a tad more aggressive than OEM. And to get that "VQ sound" which it did. This one basically changed the entire character of the car though. Used to be all induction and rpms, now it's pretty exhaust heavy. I'm coming from turbo cars, so I'm still getting used to it.
What'd you switch to? |
Quote:
|
All times are GMT -5. The time now is 04:06 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2