What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

Ian B · 09-19-2019, 01:16 AM

Does anyone know the part number for this window door trim that is rubbery material. I need to replace both sides. Any places to buy and installation info will be appreciated.

Ian B

Sorry not sure why image is upside down when right side up in my gallery.

Can someone verify if these are them and if this is a good price for both?

https://www.tascaparts.com/?p=catalo...olding%20right

God-Speed · 09-19-2019, 05:48 AM

Quote:

Originally Posted by Ian B

Does anyone know the part number for this window door trim that is rubbery material. I need to replace both sides. Any places to buy and installation info will be appreciated.

Ian B

Sorry not sure why image is upside down when right side up in my gallery.

Can someone verify if these are them and if this is a good price for both?

https://www.tascaparts.com/?p=catalo...olding%20right

Ian, on things like this always ask Cooltoy for help. If anyone know, more than likely he does.

ZontheRocks · 09-19-2019, 07:35 AM

Quote:

Originally Posted by God-Speed

Ian, on things like this always ask Cooltoy for help. If anyone know, more than likely he does.

Ark will jump in for the FSM part diagram any second now...

Ghostvette · 09-19-2019, 07:46 AM

Quote:

Originally Posted by Ian B

Does anyone know the part number for this window door trim that is rubbery material. I need to replace both sides. Any places to buy and installation info will be appreciated.

Ian B

Sorry not sure why image is upside down when right side up in my gallery.

Can someone verify if these are them and if this is a good price for both?

https://www.tascaparts.com/?p=catalo...olding%20right

West Covina Nissan's website has exploded diagram. It looks like it is in the K section and this might be the part number (driver's side):

768611EA0A

If you need the part that is on the roof, that will probably be in the J section of the diagram.

Ian B · 09-19-2019, 10:35 AM

Quote:

Originally Posted by Ghostvette

West Covina Nissan's website has exploded diagram. It looks like it is in the K section and this might be the part number (driver's side):

768611EA0A

If you need the part that is on the roof, that will probably be in the J section of the diagram.

The part number you give is for upper weather strip of door. I am looking for the strip that runs along the door where window comes up from inside door when you rolll it up.

Ghostvette · 09-19-2019, 10:54 AM

Quote:

Originally Posted by Ian B

The part number you give is for upper weather strip of door. I am looking for the strip that runs along the door where window comes up from inside door when you rolll it up.

MOULDING ASSY-FRONT DOOR OUTSIDE,RH:808201EA0B
MOULDING ASSY-FRONT DOOR OUTSIDE,LH:808211EA0B
SEAL ASSY-FRONT DOOR INSIDE RH: 808341EA0A
SEAL ASSY-FRONT DOOR INSIDE LH: 808351EA0A

Those look like the part(s) you need. Those appear to be the numbers for the inside and outside seals that are on the top of the door panel (where the window comes out).

Ian B · 09-19-2019, 02:48 PM

Quote:

Originally Posted by Ghostvette

MOULDING ASSY-FRONT DOOR OUTSIDE,RH:808201EA0B
MOULDING ASSY-FRONT DOOR OUTSIDE,LH:808211EA0B
SEAL ASSY-FRONT DOOR INSIDE RH: 808341EA0A
SEAL ASSY-FRONT DOOR INSIDE LH: 808351EA0A

Those look like the part(s) you need. Those appear to be the numbers for the inside and outside seals that are on the top of the door panel (where the window comes out).

Thanks for the parts number Ghostvette. Went by my dealer and they wanted $150 for the outside door moulding I pointed out on the left side and $110.00 for the right side. **** that, will get them through link I posted for a whole lot less and they are new OEM parts. No wonder they call them stealerships. Ugh.

Ian B

Gooch · 09-19-2019, 01:34 AM

Shipped her to the mainland..

Ghostvette · 09-19-2019, 07:40 AM

Quote:

Originally Posted by Gooch

Shipped her to the mainland..

Is Matson still the shipping company? They did a decent job on my Vette when I shipped it from Hawai'i

Gooch · 09-19-2019, 07:57 AM

Quote:

Originally Posted by Ghostvette

Is Matson still the shipping company? They did a decent job on my Vette when I shipped it from Hawai'i

They didn’t have a whole lot of branding so I don’t even know. It was government paid.

I just cringed when the guy took a microfiber and started dry rubbing my paint looking for (and making) defects

Raidernation · 09-19-2019, 03:27 PM

Just changed the oil, brake fluid and hit the 60k mile marker.

BettyZ · 09-19-2019, 08:02 PM

SPL FUCAs are in. Coated the threads with red Loctite just like Rusty told me to do. Seems like that would make it difficult to align the car, but I guess if you've been around since WWI, like Rusty, you pick up a few tricks...

Sent from my SM-G955U using Tapatalk

Rusty · 09-19-2019, 08:09 PM

You was to coat the ball of the ball joint and the pivot bearings with the red lock-tite.

BettyZ · 09-19-2019, 08:36 PM

Quote:

Originally Posted by Rusty

You was to coat the ball of the ball joint and the pivot bearings with the red lock-tite.

Damn I forgot that part! I did coat the wheel lugs tho, like you suggested.

Sent from my SM-G955U using Tapatalk

redondoaveb · 09-19-2019, 08:56 PM

Installed an NRG e brake handle, Redline Goods alcantara e brake boot and Redline Goods alcantara shift boot.

09-19-2019, 01:34 AM	#8 (permalink)
Gooch Base Member Join Date: Nov 2016 Location: Washington State Posts: 69 Drives: 15 370z 6MT Nismo Rep Power: 9	Shipped her to the mainland.. __________________ '15 370z Nismo Tech 6MT Magnetic Black, V2 BP Kit 6467 Unexploded Turbo \| '06 350z Touring 6MT Carbon Silver

09-19-2019, 03:27 PM	#11 (permalink)
Raidernation Base Member Join Date: May 2016 Location: San Jose, Ca Posts: 174 Drives: 2016 GM Base 7AT Rep Power: 10	Just changed the oil, brake fluid and hit the 60k mile marker. __________________ 2016 7AT GM Base: Fast Intentions CBE 18" Res, Z1 Rear Diff Cover, Quaife LSD, Nismo S-Sport Suspension, Nismo Body Brace Kit, White Line Front Sway Bar, SPL Front End Links, Energy Rear Bushing, Z1 Post MAF Silicone Tubes w/ K&N Drop-in Filters

09-19-2019, 08:02 PM	#12 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: USA Age: 38 Posts: 5,260 Drives: A Garage Queen Rep Power: 2684371	SPL FUCAs are in. Coated the threads with red Loctite just like Rusty told me to do. Seems like that would make it difficult to align the car, but I guess if you've been around since WWI, like Rusty, you pick up a few tricks... Sent from my SM-G955U using Tapatalk __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

09-19-2019, 08:09 PM	#13 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,484 Drives: 2011 Nismo GM 6M Rep Power: 2684438	You was to coat the ball of the ball joint and the pivot bearings with the red lock-tite. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM