Nissan 370Z Forum
Page 212 of 435 « First 112162202210211 212 213214222262312 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Nissan 370Z General Discussions (http://www.the370z.com/nissan-370z-general-discussions/)
-   -   What did you do with your Z today V (ON TOPIC DISCUSSION ONLY) (http://www.the370z.com/nissan-370z-general-discussions/122002-what-did-you-do-your-z-today-v-topic-discussion-only.html)

redondoaveb 05-18-2019 04:23 PM
Quote:
Originally Posted by BettyZ (Post 3853519)
Very simple, I was quite surprised. I gave the CF portions of the wheel a ceramic coat as well, should help keep scratches down.

Sent from my SM-G955U using Tapatalk
Ceramic coating isn't a bad idea. The good thing is that with proper hand placement, your hands aren't on the carbon fiber sections.

BettyZ 05-18-2019 06:04 PM
Quote:
Originally Posted by redondoaveb (Post 3853522)
Ceramic coating isn't a bad idea. The good thing is that with proper hand placement, your hands aren't on the carbon fiber sections.
Exactly! I'm 6'4 255 lbs and my seat is as close to the floor pan as I could get without bolting directly to it, so my main concern was preventing scratches as I execute the 7-step procedure called "getting out of my Z." :driving:

Jonitus 05-19-2019 02:15 AM
I installed the cargo cover I bought from a member here, so now my subwoofer is 'invisible'. I also installed a real leather e-brake boot. I was going to apply the CF dash kit I bought but decided against it.

Fuzzzy 05-19-2019 10:38 AM
Quote:
Originally Posted by BettyZ (Post 3853530)
Exactly! I'm 6'4 255 lbs and my seat is as close to the floor pan as I could get without bolting directly to it, so my main concern was preventing scratches as I execute the 7-step procedure called "getting out of my Z." :driving:
So true!

Sway 05-19-2019 10:39 AM
4 Attachment(s)
Installed my Stillen 25 row oil cooler.
Also upgraded my AFFM (Air Functional Fang Mod) ... it’s not so ghetto now. More in my build thread

Zingston 05-19-2019 10:45 AM
Quote:
Originally Posted by Sway (Post 3853627)
Installed my Stillen 25 row oil cooler.
Also upgraded my AFFM (Air Functional Fang Mod) ... it’s not so ghetto now. More in my build thread

Have you had time to drive a bit and test its cooling abilities yet? If so, what are the differences in temp you're seeing? Thanks!

Sway 05-19-2019 10:53 AM
Quote:
Originally Posted by Zingston (Post 3853628)
Have you had time to drive a bit and test its cooling abilities yet? If so, what are the differences in temp you're seeing? Thanks!
I have! Long story short, last week, 15 min of driving and 10 min of idling I saw 196. Last night 20-30 min of driving and 10 min of idling plus a little warmer temp outside and never went above 184, even cruising at 90mph for 5 min. :tup:

Zingston 05-19-2019 11:13 AM
Quote:
Originally Posted by Sway (Post 3853632)
I have! Long story short, last week, 15 min of driving and 10 min of idling I saw 196. Last night 20-30 min of driving and 10 min of idling plus a little warmer temp outside and never went above 184, even cruising at 90mph for 5 min. :tup:
I need to get one... temps here in FLA are probably fairly similar to the Dallas / FW area.

Sway 05-19-2019 11:19 AM
Quote:
Originally Posted by Zingston (Post 3853637)
I need to get one... temps here in FLA are probably fairly similar to the Dallas / FW area.
Pleased as punch so far. Not a difficult install either. Think it took me an hour to install it and change the oil. Hour and a half tops.

Zingston 05-19-2019 11:28 AM
Quote:
Originally Posted by Sway (Post 3853640)
Pleased as punch so far. Not a difficult install either. Think it took me an hour to install it and change the oil. Hour and a half tops.

Oh, And I like punch!!

abm89 05-19-2019 11:36 AM
LOL battery died when I decided to go to cars and coffee...

Current battle for which car is my favorite:
Honda 1 | Z34 0

BettyZ 05-19-2019 01:39 PM
Quote:
Originally Posted by Sway (Post 3853627)
Installed my Stillen 25 row oil cooler.

Also upgraded my AFFM (Air Functional Fang Mod) ... it’s not so ghetto now. More in my build thread
That's a clever/ballsy way to attach the lines to the sandwich.

Sent from my SM-G955U using Tapatalk

BettyZ 05-19-2019 01:40 PM
Quote:
Originally Posted by Fuzzzy (Post 3853625)
So true!
I sometimes wonder if it would be easier just to fall out of the seat and pick myself up.

Sent from my SM-G955U using Tapatalk

Sway 05-19-2019 03:15 PM
Quote:
Originally Posted by BettyZ (Post 3853668)
That's a clever/ballsy way to attach the lines to the sandwich.

Sent from my SM-G955U using Tapatalk
Haha yeah it’s a bit iffy... but I’m lowered on KW’s and putting them under the sway bar scares me

BettyZ 05-19-2019 04:09 PM
Quote:
Originally Posted by Sway (Post 3853681)
Haha yeah it’s a bit iffy... but I’m lowered on KW’s and putting them under the sway bar scares me
:iagree: My lines are run Z1-style.. I would have deleted the stock sandwich cooler/tubes and run the oil lines along the pan and up the driver's side, but I live in Chiberia and really dislike the idea of idling for 25 minutes before the oil is warm enough.


All times are GMT -5. The time now is 12:29 AM.
Page 212 of 435 « First 112162202210211 212 213214222262312 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2