SRM: Who has it and uses/doesn't use it?

Armonster · 04-14-2011, 07:21 AM

Quote:

Originally Posted by chops

with SRM on, ive come to not really like the fact that it holds revs between gears. my shifts have become jerky with it on now, as the revs are not dropping fast enough, so its jerking forward.

I've been wondering about this lately, whether it is an SRM thing or a clutch thing. I still have not been able to get perfectly smooth FAST upshifts. It's perfectly smooth if you wait for the rpms to drop and then ease out the clutch slowly, but I haven't figured out the secret for smoothing out faster shifts.

chops · 04-14-2011, 11:21 AM

Quote:

Originally Posted by Armonster

I've been wondering about this lately, whether it is an SRM thing or a clutch thing. I still have not been able to get perfectly smooth FAST upshifts. It's perfectly smooth if you wait for the rpms to drop and then ease out the clutch slowly, but I haven't figured out the secret for smoothing out faster shifts.

yes this is the SRM doing its thing. as you're shifting the revs are being held in place, so in low gears where the difference in RPM is greatest, you'll have a jerky shift if you try to shift quickly. unless of course you're on the throttle. as others have said...if you rev high, that manual shifts silky smooth! otherwise with SRM on, you need to hold the clutch in for an extra second or so in order for that rev to fall

hdskull · 04-14-2011, 01:38 PM

Quote:

Originally Posted by chops

yes this is the SRM doing its thing. as you're shifting the revs are being held in place, so in low gears where the difference in RPM is greatest, you'll have a jerky shift if you try to shift quickly. unless of course you're on the throttle. as others have said...if you rev high, that manual shifts silky smooth! otherwise with SRM on, you need to hold the clutch in for an extra second or so in order for that rev to fall

You can also let go of the gas first, then shift. The engine will not hold the revs this way, and it will be smooth. I drive like how you described it though.

EazyD · 04-14-2011, 05:56 PM

Quote:

Originally Posted by Armonster

I've been wondering about this lately, whether it is an SRM thing or a clutch thing. I still have not been able to get perfectly smooth FAST upshifts. It's perfectly smooth if you wait for the rpms to drop and then ease out the clutch slowly, but I haven't figured out the secret for smoothing out faster shifts.

I find shifting to 2nd when I hit 3000 RPM works best for me with no jerkiness if you ease off smoothly and give some gas into 2nd.

I leave SRM on because I'm new to M/T.

View Poll Results: How are you using your SRM?
I always use my SRM...it's too nice to turn off.	118	57.84%
I never use my SRM...I'm a purist.	20	9.80%
Sometimes SRM is on, sometimes I turn it off. 50%/50%	11	5.39%
I have SRM ON more often than not, but it's off occasionally to remember the 'old' days.	39	19.12%
I have SRM OFF mostly. I turn it on when I'm lazy or have a special situation.	16	7.84%
Voters: 204. You may not vote on this poll

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CF Spoiler that doesn't cost 2K+	FuszNissan	Exterior & Interior	17	10-18-2009 05:38 PM
VICTORY! It doesn't getter better than this..	bkunzi01	Nissan 370Z General Discussions	14	02-26-2009 03:40 PM