Z1 Intake - first mod super stoked

Fern to the Z

Researching this mod, and sales rep at Z1 did say i "might have to take a bracket/bracing off that are not really needed and don’t come on the base models."
Anybody run into this and know what brackets he's referring to?

__________________
-16 PW/nismO TecH/7AT/Zaktek paint coating/Z1 post-MAF tubes+Side PCV Breather Hose/K&N Drop Ins/F.I. LTH's/ F.I. SS TDX w/12" Resonators-
" I LOVE the SMELL of Headers in the morning!!!!"

Jayhovah

Pretty sure it refers to the hood latch support brackets. Had to remove mine for intercooler piping as well... so far no ill effects.

__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized
DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted

jchammond

All my brackets are in place...I removed them for easier install access,but put them back on.
I added a sandwich plate between the filter base & adapter plate,,,so I could support the filters up evenly & not let the just rest on crash bar.
Also, all of my foam is intact.


Sent from my iPhone using Tapatalk

__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T

http://www.the370z.com/members-370z-...s-musings.html

Fern to the Z

So fitment is definitely not an issue, I should be able to remove bracket, install C.A.I. put bracket back on and be good to go correct?

__________________
-16 PW/nismO TecH/7AT/Zaktek paint coating/Z1 post-MAF tubes+Side PCV Breather Hose/K&N Drop Ins/F.I. LTH's/ F.I. SS TDX w/12" Resonators-
" I LOVE the SMELL of Headers in the morning!!!!"