YzGyz

The kit install itself is not bad at all. I would estimate it would take good weekend (25 hrs) If you have all your tools lined up. I approve of the kit's design. The instructions for the most part is clear. There were some areas that I couldn't follow but you could post and ask for help. Quite a few people have taken on the task so there are people who can help. SASHA is pretty good with respond to e mails And pm's. I would rate the turbo install itself a 6/10.

List of things to have ready:
-clutch and flywheel to handle power goal
-tools, sockets, lots of extensions, wobble bits, large adjustable Cresent wrench
-safe flat surface and Jack stands
-some lube ( I used water based like KY) to lube up the couplers so they slide together easier
-good light to see around in
-make sure you can get the cat off
-soldering iron and shrink wrap

Hey YzGyz! I was just looking at your build thread and I was wondering how the installation of your BP turbo was and any initial thoughts or comments on the setup in general?

welcome aboard, nice ride... take that dealer decal off under the 370Z

Make sure you get a video of her freaking out the first time you punch it.:tup:

I was launching at around 2500 rpm. I even tried ecutek launch control but that didnt work out well. Just turned into a lot of spinning and some wheel hop. It def is tricky and the track prep was...

The plan is to upgrade the CSC along with the clutch, hopefully by the end of the year. It is simply a matter of money and timing. With the 305 RE-11 rear tires, they should get some pretty good...

I found pictures online, it is not nearly as modular as I thought. Its a complete piece and not worth digging into at this time with all the other things going on (clutch, fluids, BP). I think im...

That's the stuff. Regarding the manual transmission fluid, I was just pointing out that the MT needs a GL-4 gear oil. The diff should get a GL-5 gear oil regardless of whether the car is AT or MT.

You would be even more surprised if I told you who it was. They have always done work for a fair price when I had my 350z. Maybe they think I'm made of money now? Or maybe their services are high...

I use a app called Harry's Laptimer, it's pretty nifty uses the phones camera or you can link a go pro. App was only $20 on sale. Has a ton more features that I'm not using yet. Sent from my...

this year for me is all about the 1/4, next year will be all about road courses

First track day! dXCdHc87NV8

We've done some changes to make the engine ready for the bigger boost and power: - cosworth head gasket - strenghten the cylinders sleeves - JUN exhaust cams Soon I will post the dyno...

This. Also, reach out to some of the z guys around you. Someone will help for pizza and beer.

It's here! The only missing component for the build is the A2A system from TopgunZ. I even went and bought the oil and filter for a oil change while adding the oil cooler kit.

Where are you tuning and installing? Still searching for ecutek tuner in orlando area. About to install my hd csc, 19lb sbc flywheel, stage 3 daily clutch and stage 4 pressure plate. I have a...

I have the same , AllVersion Motoring on Goldenrod. Same spot as Titan's first shop. I was thinking Revworks for the tune which is in Winter Springs about 3 miles from my house, but I'm not averse to...