YzGyz

The kit install itself is not bad at all. I would estimate it would take good weekend (25 hrs) If you have all your tools lined up. I approve of the kit's design. The instructions for the most part is clear. There were some areas that I couldn't follow but you could post and ask for help. Quite a few people have taken on the task so there are people who can help. SASHA is pretty good with respond to e mails And pm's. I would rate the turbo install itself a 6/10.

List of things to have ready:
-clutch and flywheel to handle power goal
-tools, sockets, lots of extensions, wobble bits, large adjustable Cresent wrench
-safe flat surface and Jack stands
-some lube ( I used water based like KY) to lube up the couplers so they slide together easier
-good light to see around in
-make sure you can get the cat off
-soldering iron and shrink wrap

Hey YzGyz! I was just looking at your build thread and I was wondering how the installation of your BP turbo was and any initial thoughts or comments on the setup in general?

11/9/2017: Custom 10:1 pistons have arrived! The previous Main Engineer for Arias pistons formed his own company - Traum Optimum Performance - and took our specs from the 3.7 crank/rods and made us...

Come on, baller. https://cdn3.volusion.com/o3n9t.dyzs5/v/vspfiles/photos/AL-RJ-45-2.jpg

Hey Group, Installed My new car lift yesterday and wanted to share. It is a Nationwide 4 post 8,000 pound capacity storage / service lift. So far I'm pretty impressed for under $2,500 delivered. It...

The problem on the forums is you have no idea what kind of skills the guy on the other end of the keyboard has. He may have 20yrs experience or he may have no experience. It is extremely difficult to...

Thanks for the input everyone. Ended up deciding to have someone with the equipment and experience tackle this for me. Dropped the car off this morning at ZSpeed.

It isn't bad, I've pulled mine a couple times, both times using floor jacks. Give yourself at least 2 feet of clearance to roll the trans out In terms of difficulty it's a little harder than...

It has been 3 years coming. I am #75. I just might get excited and nothing get's me that way. Well, almost nothing. :)

Hey guys! . https://i.imgur.com/cPe5ErW.jpg?1 . Going to be updating more frequently, and with that being said, we are finishing up the G37 in regards to fitment and plan on having it on the...

*STAGE TWO COMPLETE* We have officially completed the stage two single turbo kit, which includes the following changes: -Garret GTW38 Turbo w/ 1.08 Housing -New up-pipe design -New downpipe...

Pic update! Got the final version printed, painted, and put together. Was experimenting with a few different post processing methods so the finish has some flaws. Don't judge that too...

I have a Raise3d N2 Dual Plus with bondtech extruder. Build volume is 12”x12”x24” Once I got it dialed in, it’s been a awesome machine. Many great race car parts will be coming out of there. ...

So I've reached the end of the tunnel. While it's satisfying to finish it the way I wanted it in the beginning, I'm still a student and having a 650~ WHP Z isn't the best financial decision. I...

And it's done. First RHD BP member... (far as I know?) Before & after. :)

Here’s a few pics of the new one before cleaning it up. ...

Finally had a proper day off. Had a chance to start wrapping some pipes. Bought 100ft and ended up like 5 feet short lol. Came out alright though. Still waiting on the final ties. ...