YzGyz

The kit install itself is not bad at all. I would estimate it would take good weekend (25 hrs) If you have all your tools lined up. I approve of the kit's design. The instructions for the most part is clear. There were some areas that I couldn't follow but you could post and ask for help. Quite a few people have taken on the task so there are people who can help. SASHA is pretty good with respond to e mails And pm's. I would rate the turbo install itself a 6/10.

List of things to have ready:
-clutch and flywheel to handle power goal
-tools, sockets, lots of extensions, wobble bits, large adjustable Cresent wrench
-safe flat surface and Jack stands
-some lube ( I used water based like KY) to lube up the couplers so they slide together easier
-good light to see around in
-make sure you can get the cat off
-soldering iron and shrink wrap

Hey YzGyz! I was just looking at your build thread and I was wondering how the installation of your BP turbo was and any initial thoughts or comments on the setup in general?

Ground clearance you ask? I made this video long ago. https://www.youtube.com/watch?v=3RGws1UCsw0 That video is at stock NISMO height. I took these measurement and posted them in a thread a...

Here are some picture from the back to front angle. http://i226.photobucket.com/albums/dd107/Thangbom321/bom%20stuff/20160206_142643_zpsglffwfjt.jpg...

To add to the mix. I'm going to give you a quick analogy. Stock 370z is a 3/8 Rachel. You want it better and to be able to do more and more powerful so you buy sockets and extensions adapters ect....

Take that middle cover off and you will see a pin bent over a big nut. That is where it connects to the axle. There is grease in there already. I would slop a little more grease on top of things in...

Take that middle cover off and you will see a pin bent over a big nut. That is where it connects to the axle. There is grease in there already. I would slop a little more grease on top of things in...

Take that middle cover off and you will see a pin bent over a big nut. That is where it connects to the axle. There is grease in there already. I would slop a little more grease on top of things in...

It's been a little busy cleaning and the new years coming and all (Lunar New Year, TET). I have a new cool toy coming in a few days. I have been cleaning the garage out making space. It is not an...

Those RC toys are soo cool! I like the cars, planes, jets, all of them. SOO COOL!! My brother bough a mini Drone and we crash it all around the house! I don't think I can have a big one. You guys...

Those RC toys are soo cool! I like the cars, planes, jets, all of them. SOO COOL!! My brother bough a mini Drone and we crash it all around the house! I don't think I can have a big one. You guys...

I think that is a breather hose that connects to the top of the trans. One of the very top bolts hold that chrome piece in place and the other end connect to the trans. I think anyways. YzGyz

With all the $$ I spent of records and saltwater stuff, I could of had a new Z... LOTS AND LOTS of LPs!! I use to spin a LOT! Here is a crappy cell phone pic of the pile. ...

$2500 to install the BP KIT!!! WTF RAPE SOME MORE!!! That is crazy for the just the kit. $2500 better be the turbo kit, trans work, and the tune... Do yourself a favor and shop around at different...

Next time use less of it. Better to do multiple small application and sand than having to sand a glob. Buy plenty of sand paperwork and a palm sander. For the circle areas. Find something round...

You are going to hate bondo and sandpaper. You did a damn good job so far though. YzGyz

[QUOTE=Meulen;3397645]Nice helmets too! motorcycles!!! another hobby for you! LOL I gave that up several years ago, although it's something I would like to pick up again. Unfortunately, the time...