V1H

Hey, I was trying to bypass my seat sensor based on your braum install thread. The photos seem to be lost, so I only had your text to go on. Did you have a seat connector with 3 wires to it? (12v, com, gnd) I tried placing a 15ohm resistor between com and gnd but it seemed to give me the flashing airbag light. Do you remember which pins you put the resistor in?

Thanks

You won't find a bracket; you have to home-make one. That is, just use two aluminium right angle pieces from hardware store, bend it to shape by hand, then slap on some fibre mesh and resin (from a DIY car body repair kit from any car store)

Hey thanks for the message! My Z does have the stock DRLs. What kind of bracket did you use? My problem is that since they do not fit, I dont know of a bracket that I could use to connect lights behind the bumper. If I could find a bracket or something, then I would be ale to use my stock DRLs behind the bumper

Hey! Sorry to bother but I was wondering if you could give me some info regarding your amuse drl? I am going to install the bumper soon and I would very much like to keep my Drls or a variant of it!

Thanks in advance 😊

college is overrated. go boost. :tiphat:

RxRdv7LYAbQ _______________________________________Original Post Below________________________________________________________ Warning: Long and informative post ahead! The Story Behind...

This is still a work in progress but should be done by the weekend hopefully, especially with a couple new kits just hitting the market. Single Turbo Kits: Boosted Performance: This...

Accessories/Supporting Mods: Accessories and supporting mods are usually pretty important depending on the application. You can get carried away with accessories when comes to a forced inducted...

Some 2nd-3rd gear pulls. I will make some more soon at night so the gauges are easier to see and I will also angle the GoPro down a bit more. JwRbE0WaGls Edit: The car was making just under...

AQgSjluYxzo

Alright Ladies and Gents, had to fly out here to Cali myself and see the shop and TT 370 prototype myself. I've had a great working relationship with Tony over the past few years as an owner of his...

Contact Shell: JKXEV4lpbCI&sns=em

Update, More Turbo parts have arrived! Below you will see our engine side block adapter housing and oil filter relocation housing. Both will be incorporated into our TT Kit. They work in...

There are delays, then there is a gtm kinda delay.

On my way to work I was making blow off valve noises all the way! Lmao

I'd say thats real good power on a dyno-dynamics, 315 ish on dynojet would be my uneducated guess

I think I have one last thing to say about the drag time banter and then would appreciate if we could all get back on topic which is the TT Kit. The time of 11.75 seconds is a great time. A great...

Guys my tuner just finished up my car and happily made 457 whp on a mustang dyno on 91 crap octain and 370 humid weather at 8 psi gtm stage 2 sc, and one of the maps is the u prev 2 step back fire...

I would say I recently installed my NST Pulley kit, but that would be misleading, since I installed them about 3 months ago. :icon18: Anyway, I thought I would get around to some quick thoughts on...