Tractionless

Sold some shocks to Tractionless. Nice, easy guy to deal with. Thanks!

I highly recommend NOT using Getyourwheels.com

I had a problem with my Forgestar F14's clear coat failing within 4 months and 1,500 miles of ownership in a state that doesn't see freeze/thaw nor use road salt.

Get your wheels receives them as blanks from Forgestar and then finishes to your liking. Who ever they are using for coating is subpar!

They tried blaming my installer but when I told them i went to a high end shop that deals with all kinds of wheels in sizes up to 30" and showed pics of the machines they backed off. Then they admitted the coater was having problems with the clear that was used on my wheels.

They told me I had to cover dismount, shipping both ways and re-mounting costs to have them recoated.

Upon receiving them back the water that got below the clear damaged the metal permanently. So although recoated the damage can always be seen underneath. They did not tell me that prior to shipping back.

When approaching them about it they offered me a $50 refund on a $2100 set of wheels.

RUN from Getyourwheels.com!!!!

Thanks for an easy transaction. Super transparent and communicative buyer! Buy/sell with confidence.

excellent seller everything worked out great thanks

10/10 would recommend Tractionless as a seller. I recently bought some used wheels from him and he shipped them out the next day. They arrived exactly as described and they were packaged very well! Thanks again

"Tractionless is one of the nicest person I have ever dealt with. I would definitely
do another transaction with him in the future."

I second that, a pleasure to do business with!!

Tractionless is one of the nicest person I have ever dealt with. I would definitely
do another transaction with him in the future.

In my experience subframe collars are a great upgrade and a much easier install than replacing the entire bushing. So far the only bushing's (other than rear end) I've replaced on my '10 with 101k...

Contact Eugene Turkov of Infiniti Care, username "BytheBay" on the forum. He'll get you taken care of.

I replaced the brake light switch as it was causing a blinking CC light and the CC was not functioning. My brake lights were still working like the OP also. My notes also read if it's not the...

Contact Eugene Turkov of Infiniti Care, username "BytheBay" on the forum. He'll get you taken care of.

Contact Eugene Turkov of Infiniti Care, username "BytheBay" on the forum. He'll get you taken care of.

I replaced the brake light switch as it was causing a blinking CC light and the CC was not functioning. My brake lights were still working like the OP also. My notes also read if it's not the...

I replaced the brake light switch as it was causing a blinking CC light and the CC was not functioning. My brake lights were still working like the OP also. My notes also read if it's not the...

Contact Eugene Turkov of Infiniti Care, username "BytheBay" on the forum. He'll get you taken care of.

Price on the headlights is fine, actually low from what I've see and considering Bidenflation.:mad: GLWS

I believe it if the oil pressure is at spec FSM values! The issue has been blown way out of proportion on forums, mostly FB etc. to the point where potential buyers demand it has been done and if...

Wow just going back to fresh oe would probably be a big difference with that mileage. I bet it's back to driving like a dream! Other than the items listed above are all of your rubber suspension...

Don't use anything that ingests heat soaked engine compartment air. High IAT's cut timing, which kills power.

Nice data under harsh conditions, thanks!

The differences are in the TCM installed within the valve body. I recommend getting any salvage yard VR30TT transmission, and swapping over a known good TCM of the same part number from your Z. ...

Since I didn't see it I'll simply add that I've seen braces that simply reuse the OE bolts; therefore, you shorten thread engagement into the diff. :shakes head: I sourced gr. 8.8 bolts with the...