Tractionless

Sold some shocks to Tractionless. Nice, easy guy to deal with. Thanks!

I highly recommend NOT using Getyourwheels.com

I had a problem with my Forgestar F14's clear coat failing within 4 months and 1,500 miles of ownership in a state that doesn't see freeze/thaw nor use road salt.

Get your wheels receives them as blanks from Forgestar and then finishes to your liking. Who ever they are using for coating is subpar!

They tried blaming my installer but when I told them i went to a high end shop that deals with all kinds of wheels in sizes up to 30" and showed pics of the machines they backed off. Then they admitted the coater was having problems with the clear that was used on my wheels.

They told me I had to cover dismount, shipping both ways and re-mounting costs to have them recoated.

Upon receiving them back the water that got below the clear damaged the metal permanently. So although recoated the damage can always be seen underneath. They did not tell me that prior to shipping back.

When approaching them about it they offered me a $50 refund on a $2100 set of wheels.

RUN from Getyourwheels.com!!!!

Thanks for an easy transaction. Super transparent and communicative buyer! Buy/sell with confidence.

excellent seller everything worked out great thanks

10/10 would recommend Tractionless as a seller. I recently bought some used wheels from him and he shipped them out the next day. They arrived exactly as described and they were packaged very well! Thanks again

"Tractionless is one of the nicest person I have ever dealt with. I would definitely
do another transaction with him in the future."

I second that, a pleasure to do business with!!

Tractionless is one of the nicest person I have ever dealt with. I would definitely
do another transaction with him in the future.

Reach out to Eugene Turkov, he can go through all the features you have and want to add and can educate you along the way on why things should be tuned a certain way. He developed the first and only...

It was about $650 for everything and then a little work on my end. A big benefit is less drag on the motor. engine spins a lot more freely. you also have the option for On and Off. When I am in the...

Here are some pics of the f**ked up PS inlet fitting that I mentioned above. You can see that the O-ring surface is deformed, which is where it must’ve been pulling in air past the O-ring. The paint...

If you want cheap, legit parts, Rock Auto is your friend. Make sure you’re buying a reputable brand though, because rockauto does sell a lot of lower quality “economy” options. Sent from my...

LOL, they are fakes. Buy from a reputable dealer of your choice. Stay away from FleaBay and Amafake.

Yeah, I agree. It could be related to anything ranging from a fueling issue to knock protection kicking in due to excessive heat. Your tuner should be able to figure out the issue from the logs.

OEM zip tie $10? Crazy.

The issue was the GTM supercharger-kit-provided power steering suction pipe. It’s corroded and the male o ring surface is all f**ked up. Not sure how it happened or if it was always like this and...

Check your fuel pressure since you have a return system and pull some logs when this is happening. Omni 4 bar Maps fail quite a bit especially if they are mounted on a metal intake manifold. You will...

Sounds like a bad battery. Have it checked.

Guaranteed to work or I will give you a refund. Took this off a mint pass seat with 15k miles on it. Car was gutted to make a race car out of it and I bought all the interior. $60 plus shipping,...

I agree with you ZoomZ. If Nissan's engineering team didn't think these sub stays served any purpose they would have opted to remove them and offer a cost savings in production. Since they didn't...

This is what I installed along with the 4 point member. https://www.soulfunction.com/collections/370z-z34/products/front-subframe-lateral-brace-kit?variant=14227098533931#content The 2 Short...

Need to pull the inspection cover and watch the converter while the car is running. If it is doing the Funky Chicken, someone tightened one bolt all the way down and it caused the converter not be on...

I'd definitely try this first.