TBatt

TBatt Wrote :
Last night I found the problem. A connector was not fully seated on the transmission harness that has the hookups for the O2 sensors. There is a single wire connector that goes up near the starter motor that was not seated all of the way. When it was fixed the car started up.
--------------------
Sorry to bug you 6 years after you posted this - but i have having the same trouble (No recent work done to the car)
I checked the switch with an ohm meter and checked the fuse and the only relay i could find in the IPDM.

The wire you referred to .... where did it come from / Go to?
Thanks Tons for any help you could offer.
Dylan

PM’d you !

Crazy enough I'm in Huntsville and have been looking for a new (to me) car. I had test drove a Nismo up at Jerry Damson but it sold before I got the go ahead from my wife. I was wondering if you where available next week to meet up so that I can check out the 370. I'm Montgomery this weekend but will be back in Huntsville on Monday.

-Edward

Sorry for the slow response but I've been crazy busy at work.

Send via PayPal. My account is tbatt@knology.net

Sounds good where do I send the payment and shipping info too?

The complete kit, with shipping in the US is $175.

Hi ,
How much do you charge for your stillen idler pulley and hd belt upgrade ?

Yes, but i don't have them with me at the moment, they are at my office.

Nice car- Roll Tide ('15)!

Can you share your offsets?

Don't go with forced induction! It will eat rear tires, cause a stupid grin on your face and it makes the FI exhaust come really alive. If you do, do it right and don't skip all of the mods needed....

Don't go with forced induction! It will eat rear tires, cause a stupid grin on your face and it makes the FI exhaust come really alive. If you do, do it right and don't skip all of the mods needed....

Don't go with forced induction! It will eat rear tires, cause a stupid grin on your face and it makes the FI exhaust come really alive. If you do, do it right and don't skip all of the mods needed....

Don't go with forced induction! It will eat rear tires, cause a stupid grin on your face and it makes the FI exhaust come really alive. If you do, do it right and don't skip all of the mods needed....

That and a proper MAP sensor. You have spent a lot of money already so go ahead and get on board with Seb at Specialty Z and get the GTR 4 bar MAP sensor. My supercharged Z drives like it did...

Finally got caught up and had time to program and install my AEM gauges into the cubby mount. Looks awesome. I'll be installing them on the 10th along with a Z1 oil cooler kit. Then comes the...

I followed Seb's advice and installed the GTR MAP sensor and he tuned the car for SD while on boost. Works great.

Don't go with forced induction! It will eat rear tires, cause a stupid grin on your face and it makes the FI exhaust come really alive. If you do, do it right and don't skip all of the mods needed....

AEM boost and AF gauge. Wideband Failsafe Gauge | AEM (http://www.aemelectronics.com/?q=products/gauges/failsafe-gauges/wideband-failsafe-gauge) It will log the data while you drive. It has a...

Don't go with forced induction! It will eat rear tires, cause a stupid grin on your face and it makes the FI exhaust come really alive. If you do, do it right and don't skip all of the mods needed....

Sorry but I do not have first hand experience with the Zeitronix. The AEM Failsafe is super easy to install and the logging feature is really nice when a problem comes up such as a bad fuel pump....

AEM boost and AF gauge. Wideband Failsafe Gauge | AEM (http://www.aemelectronics.com/?q=products/gauges/failsafe-gauges/wideband-failsafe-gauge) It will log the data while you drive. It has a...

I'm 62 and did the SC and A2A on my Z. What mid-life, I'm still young! Good luck with the mods!

Don't forget the S-04 Bridgestones. To me, this is the perfect DD tire. Still works pretty well in the cold. Dry and wet traction is VERY good! Quiet too. Price is very reasonable.

No, but everyone here that has used Seb has been VERY happy with his work. Great guy and he goes out of his way to help. Money well spent.