TBatt

TBatt Wrote :
Last night I found the problem. A connector was not fully seated on the transmission harness that has the hookups for the O2 sensors. There is a single wire connector that goes up near the starter motor that was not seated all of the way. When it was fixed the car started up.
--------------------
Sorry to bug you 6 years after you posted this - but i have having the same trouble (No recent work done to the car)
I checked the switch with an ohm meter and checked the fuse and the only relay i could find in the IPDM.

The wire you referred to .... where did it come from / Go to?
Thanks Tons for any help you could offer.
Dylan

PM’d you !

Crazy enough I'm in Huntsville and have been looking for a new (to me) car. I had test drove a Nismo up at Jerry Damson but it sold before I got the go ahead from my wife. I was wondering if you where available next week to meet up so that I can check out the 370. I'm Montgomery this weekend but will be back in Huntsville on Monday.

-Edward

Sorry for the slow response but I've been crazy busy at work.

Send via PayPal. My account is tbatt@knology.net

Sounds good where do I send the payment and shipping info too?

The complete kit, with shipping in the US is $175.

Hi ,
How much do you charge for your stillen idler pulley and hd belt upgrade ?

Yes, but i don't have them with me at the moment, they are at my office.

Nice car- Roll Tide ('15)!

Can you share your offsets?

Nice. Almost exactly my setup. :tup: While you're at it look at coolant-line deletes for the throttle bodies. No use heat soaking them after all the effort to avoid hot air going in. Which also...

Hopefully it's just squirrely because of Stillen's funky tunes. 90% chance a good custom dyno tune will clear it right up. He just needs to make sure nothing else got toasted in the process.

If you want to know if the engine is ok, have a mechanic (preferably a new one, your guys sounds in over his head) perform a compression test and leakdown test. Send an oil sample to Blackstone labs...

Thought it might be that simple, but didn't want to assume. Thank you. Well in that case my opening post is correct. :)

You are computing a dimensionless number (ratio). As long as the units match up (teeth/teeth, circumference/circumference, etc), it will work.

Go for the newer 1050x series. Quite a few improvements over the 1000 series. Cost about 10% more though. I have these on now and it starts + idles like it was still an N/A, also largely due to...

If you are staying conservative for your stock 7AT, you can probably just stick with what stillen gives you. I am only running a walbro 255lph pump and 600cc injectors (came with my Gamma kit - think...

No it's not. Increasing the oil capacity just means that it will take longer for the oil to heat up but once it gets hot good luck getting rid of the heat without an oil cooler.

I've never heard negative comments about the Z1 ; everything i've read says Z1 and Fast Intentions are the best out there. I would spring for the 34 row from either company and never worry about...

These guys have it right. It's not that a boosted Z can't be reliable, it's just that it requires you to be on top of everything a lot more than a NA Z. Tuning and maintenance is key. You don't...

I did my own install and have not had any major problems yet! There have been a few little gremlins since we finished the kit install (at the time once we got it running, I was out of time to keep...

How many? Every single person ever. Was it worth it? Every single second. Nuff said.

:iagree: Tune is THE MOST IMPORTANT PART of the build. That's why so many people spend weeks remote tuning with specialty Z if they dont have a proven local guy.

I am undergoing a major project utilizing the stock manifold for a new supercharger kit. I bought a 3D scanner and am starting on this project soon. It might be Rotrex based. I am aiming for a turn...

Awesome! Think it is the way to go. The independent R&D on this board between TBatt's "Belt Slip Kit" and Topz A2A kit is going to start driving up the price of used Stillen kits!! I wonder how many...