SouthArk370Z

Thanks for liking Vanilla fudge post. Unfortunately the old ways of bringing new music and bands into view these days does not allow for actual albums to be produced. Lots of one hit wonder songs that will never be memorable and last the test of time. I guess Im old and like my parents, they did not like my 60's through 80's music ? Or am I telling the truth that today's contemporary music just sucks. In any event I did enjoy many of the music picks posted on this page. I like your car. Red is always a winner...

hey any chance you seen or know how to reloacate cruise control on 370z i got uprev tune and i want a nrg steering wheel. is it the same as 350z

Hey man, saw you were from S. Arkansas. I lived my early childhood in Camden. Currently in Fayetteville. Nice to run into fellow Arkansans!

Hey, man, I like that you have the FSM linked in your sig -- admirable

Helpful forum members are good forum members

Hey I noticed you had a post (way back in November of last year) in regards to someone have a rattle in their drivers door. You posted that the dealer adjusted something in the window regulator that fixed it. I have a door rattle too, and am beginning to suspect the window regulator. If you have any other insight into the issue I would appreciate it>

Hey, we should meet. I come to Arkansas two or three times a year to drive the Ozarks. Best roads I've ever been on . My first stop from here is Texarkana , then the next day, I just head out.

Thank you for the music compliment. I do like my music -- my interest got stalled around 1994 though.

Sounds like you need to either disconnect the battery of get a battery tender aka trickle charger. Most cars normally have some battery draw while sitting for long periods. So unless you have...

Me with my old friend watching the F1 race this morning.16 years young!https://uploads.tapatalk-cdn.com/20190714/376103e3c2fc9785fae5ee54ba24a86c.jpg Sent from my SM-G965U using Tapatalk

http://scontent.fsac1-1.fna.fbcdn.net/v/t1.0-9/70486047_2612504785455288_8269286580087160832_o.jpg?_nc_cat=104&_nc_oc=AQkOTIZU-68bmrsAhatIbJ8ely_T6P9UEzusRNAN6dZKTZy-y5BhdO70klYxHg_w9GU&_nc_ht=sconten...

Swung by HF today and picked up a sandblasting cabinet. Then spent 2 hours taking it apart and fixing everything that Mi Suk Dong missed at the factory in Guangzhou... Sent from my SM-G955U using...

Yeah. We don’t listen for ****. Think that’s why the rest of the world hates us.

JVj61ZX_8Cs

/1JnQfKIFERU

So, it's been about two weeks since all my issues and I think i can confidently say that it was just my battery terminal connections. They were both a bit loose and figured it was from when I changed...

Give us the scoop for folks that don't have MyFace..... aka Facebook

Maybe you can wiggle, rotate slightly, the barrel in the receiver using a strap wrench and vise to break it loose.

I have an old AT500. I'll take a look at it tonight, and post up.

:( That poor shotgun. It might be hard enough to do that, I'll ask my gunsmith. Hopefully he gets me an answer in less than 2 weeks... He's always busy.

This might be a stupid question but what position is the action in while you try to remove the barrel? IIRC you have to hold the action about 1/3-1/2 open for the barrel to unlock. I don't own a 500...

This might sound silly but I would make sure the barrel can come off. If Mossberg has a serial number search, I would check the model and variant just to be sure. If it can come off I would soak it...

Gad, JC's post makes me want to get back to the component level repair I used to do. Only problem now is that the parts are so damn small that I need a magnifier or a scope to replace them. Most of...