sandersd

Will that harnness work for 370z even though made for 350z? Also, will it work for both driver and passanger side? Thanks so much for your help.

Hey nice stable of cars! Just wondering what you think of the Nismo 370 compared to your 2002 996.. Which do you like more? Pros and Cons of each? I must say that I was looking at some used 996s before I bought my 370Z a couple years ago, never did I test drive one though.

*F1 does still use a manual transmission if one defines it as using a clutch instead of a torque convertor to transmit the power. It is hydraulically activated, shifted if you will, but it is not an...

Understand how a torque converter works and you will answer your question. Automatic transmission w/ converter is not to be confused with an auto-shifting dual clutch manual - that would beat a...

How did you get the black and red lettering in the NISMO on the wheels? Paint, stickers? I've considered doing that but aside from an accomplished pinstripe artist am not sure how to get clean edges.

Not trying to be contentious but I think the OP is talking about coil overs, not lowering springs, and also camber arms, which will allow adjustment of camber to specs so he will not be running...

It did for me with SPL camber arms, stock toe adjustment bolts, BC ER coil overs lowered 1.5".

Rear camber links don't have anything to do with toe. The toe is adjusted with the bolt on the spring arm, so you don't give up anything. Mine adjusted fine with the SPL camber arms and BC ER...

I found a great resource explaining alignment issues. It contains technical articles and diagrams as well as tools to DIY camber/caster, toe, and bumpsteer. Check it out! Longacre Racing...

Sad, but probably true. Of course everyone is free to do what they want however they please, but those recommendations are there for a reason and I try to follow them, especially when applying torque...

Your "professional installer" will magically know. I installed both the camber link and traction link. Note that these are SPL's names for the parts. Nissan calls them a front lower link and...

I've always been a DIY kinda' guy. I hate paying someone to do something I can do. I always figured I could buy the parts and the tools to do a job for less than a third party would charge me for...

I had a B&M Trak shifter in my 911. It had an extra long handle to raise the shift knob to the centerline of the steering wheel. The location made shifting effortless and fluid. When I change my...

I agree with the earlier comment to take it to a tuner shop. Dealers here in Houston will not install, modify, or adjust anything if it involves an aftermarket part. I would definitely chose a...

There is an adjustment bolt on each of the lower links - one on the front lower link and one on the rear lower link. Download the service manual for a detailed description and alignment procedures. ...

Fronts wear on the outside? That's odd with the springs. I don't see how you ended up with less camber.

Fly to Vegas to check out seats? That was kinda my point: a little inconvenient. Besides it's not open to the general public (http://www.semashow.com/the-sema-show) and only comes once a year.