OptionZero

Man, you're becoming one of the OG's on this forum. Good s**t.

Hello,
Were you able to fix the stuck climate menu?
My Z is doing it. I already tried disconnecting the battery.

Thanks,
Tom

Okay thanks for the info! Any pictures running the 17x9.5+22??

stumbled across your s14 with the nismo lmgt4 wheels and wow it's beautiful, do you mind sharing specs? im looking at buying some lmgt4 but looking to buy the right size once, i want more grip than stance but a lil fitment doesnt hurt, can u guide me?

Before you do anything, you need to read. This thread to understand wheel fitment generally: http://www.the370z.com/wheels-tires/133663-wheel-fitment-101-start-here.html This thread on Work...

This is the wheel setup that should be everyone's baseline to work off of

Buddy, you sure needed to search through this forum, because I did all the work for ya http://www.the370z.com/brakes-suspension/131395-project-stanceparts-air-cup-system.html stanceparts all 4...

Here is my trunk and switch setup. The compressor is below the tank in that gap between the spare and the front seats. The Nismo has some braces down there but there was room to bolt it down. ...

I can't recommend lithium enough. One of my fav mods: http://www.the370z.com/track-autocross-drifting-dragstrip/135318-antigravity-lithium-battery-experience.html Hit up CJM/Phunk

I can't recommend lithium enough. One of my fav mods: http://www.the370z.com/track-autocross-drifting-dragstrip/135318-antigravity-lithium-battery-experience.html Hit up CJM/Phunk

Rotors can be resurfaced and then you just bed the new pads/rotors But rotors are cheap enough they can just be replaced

Rotors can be resurfaced and then you just bed the new pads/rotors But rotors are cheap enough they can just be replaced

For bumming around the street, OEM is more than fine There's probably some low-dust options if you wanna go aftermarket. Powerstop i heard is good

For bumming around the street, OEM is more than fine There's probably some low-dust options if you wanna go aftermarket. Powerstop i heard is good

My final solution was a 4 inch height, 2.5 inch diameter, 600lb/ft spring from Eibach We were able to trim the spring perch without machine work, it was thin enough metal we could take a...

Final setup pictures Note what was trimmed on the rear perch

For bumming around the street, OEM is more than fine There's probably some low-dust options if you wanna go aftermarket. Powerstop i heard is good

For bumming around the street, OEM is more than fine There's probably some low-dust options if you wanna go aftermarket. Powerstop i heard is good

i'm running stanceparts air-cups on all 4 corners with SPL everything i think you're good