Optimiser

Sent you an email

Hi there,
Sorry don't have those socail media accounts but you can email me at pcoptimiser@optusnet.com.au
My car is actually at Revzone now getting some more things done. happy to discuss with you.

Hey buddy, do you have discord or facebook?

Would like to chat you about your build. I'm from Australia buying the stillen supercharge kit with some upgraded components. Getting it tuned at Revzone next month.

Eugene T. didn't save you from yourself. No other reputable tuner would have done it. They would have refused. So much for how great he is. BS......

Money wise, you are looking at 15 to 20k just for the engine. It also depends if you plasma cut the top of the block. If so, it is garbage and you will be looking for a junk yard long block to build...

Welcome to the club. Now it is gonna get expensive if you want more power. Head studs alone won't do chit.

Any updates Aaron?

If you use a GL5 lube in the tranny. It will slowly eat the synchro's in there.

That sounds kind a like of something sexual. :icon14:

A one wheel peeler. :driving:

Finally got to watch that video. That was just a lack of talent. Pure driver error. :shakes head: The rear started to drift. He lifted. The rear got a bit of traction and wiped it to the other side....

First of do a little research and reading about the companies and their products. They both have done and still do diffs for Motorsports at the highest level. I ran a Wavetrac for five years on the...

A helical diff isn't dangerous. Only the driver.

Normal

I could barely hear it in your vid though. Without diagnosing this in person your Z has the tell tail signs of a failed throwout bearing. What clutch/flywheel do you currently have? How many miles do...

WRONG, they don't crack. They start leaking at the back. 20psi should be fine. I ran 22psi with no issues. 25psi, forget it. If you get up in the 20psi range that is build motor territory anyways.

https://i.imgur.com/Z9ihOTR.png It does happen. I have nothing more than a stock v3 SI and an RPM belt on the supercharger side (planning on trying to add one to the serp side as well as an...

There is no aftermarket replacement for it. what can do is remove it. Spray it with POR15 to remove the rust. Repaint it. Then spray the inside of it with Fluid Film, and the outside with rattle can...