NorthStyle

Hello,

Wanted to let you know if you ever decide your considering letting go of your ganadors please keep me in mind. I'm def interested and may be for a while till I source a set.

Hey

Hi,
ich lese gerade du fährst das Juke Nismo Lenkrad in deinem 370z.
Ist das echt komplett gleich bis auf den Airbag?

Viele Grüße aus Köln

I always base my wheels off of measurements. In your case, since the difference is the same (9.5 & 10.5 vs a 10 & 11) I'd go with a 275/305 combo as the difference of 1" is 25mm so you could shoot...

You shouldn't need a puller for the wheel. I was able to remove mine pretty easily without one.

Not boosted, but I have the AEM Failsafe (does boost/wideband) and uses the Bosch 4.9. Not many miles but seems pretty accurate so far and have had positive experiences using AEM AFR gauges in my...

Not boosted, but I have the AEM Failsafe (does boost/wideband) and uses the Bosch 4.9. Not many miles but seems pretty accurate so far and have had positive experiences using AEM AFR gauges in my...

http://www.the370z.com/tires-wheels/85006-getyourwheels-shipment-day-showroom-52.html#post3627747 Similar, but I wish they (Rays) made the rears in a 20x10.5/11 size or even a 20" for the LMGT4......

Sounds like you want either Pilot Super Sports or Pilot Sport 4S

They make puddle light kits; I had one on my previous VIP "inspired" car. Can be bought for about $30-100 depending on what you want and can be wired with the dome lights so when the lights come on,...

Taillights haven't changed... same as the previous 6 years

Like Ventruck said, those expecting these to be around $300 are probably going to be disappointed. If you look at the WRX, GT-R and RX7 lights, they range from $650-1500 depending on size and...

Considering how the PSS pretty much beat all of those same tires in most of those tests, I'm more interested in how the PS4S compare to them.

Fly1 makes reps if you're willing to go the rep route.

Last update: I received the -12/-10AN hoses and was able to test fit them. The -12AN fit over it, however as I mentioned before, with the hoses and clamps there is some contact between the pairs...

Actually, I was speaking with one of the guys in the builds section who informed me that, if you cut off those humps, you can run the -10AN hose/clamp setup. Luckily I have friends in Japan so...

Someone finally gets it!! Kudos to you, Sir.

Someone finally gets it!! Kudos to you, Sir.