luigi90210A True Z Fanatic |
Last Activity: 12-23-2015 02:17 AM
- User Lists
About Me
- About luigi90210
- Biography
- My name is Mike, don't ask how i came up with Luigi90210
- Location
- San Diego CA
- Drives
- Classified
-
Signature
- SOLD 370z
New Car:classified
DD:2011 Mini Cooper S stock
- SOLD 370z
Likes Given
1021 Likes
-
luigi90210 liked post by Chuck33079 On thread : Titanium wrapping stock headers while still on the car..Why? The OE headers have a heat shield on it. A metal heat shield with an airspace like OEMs use works great. I think it would be wasted effort.Liked On: 02-11-2014, 02:48 PM
Posted On: 02-11-2014, 02:05 PMluigi90210 liked post by 1slow370 On thread : Do i need to replace the clutch when a CSC brakes?should only need a can of brake cleaner, its brake fluid take it apart spray the flywheel wheel wipe off with a rag, spray out the presure plate assembly spring area a bit, and then spray and wipe...Liked On: 02-11-2014, 12:10 PM
Posted On: 02-11-2014, 03:10 AMluigi90210 liked post by 1slow370 On thread : Do i need to replace the clutch when a CSC brakes?the lighter the flywheel the more chatter you will get (just a forewarning) and the jwt is just a stock disk with higher clamp so you *could* just replace the friction disk and clean off the flywheel...Liked On: 02-11-2014, 03:04 AM
Posted On: 02-11-2014, 02:23 AMluigi90210 liked post by Fulljim On thread : 09 Nismo Z exhaust projectJust finished polishing my first HFC... Took me 1:30h, but i'm happy with the result ! 83732Liked On: 02-11-2014, 02:52 AM
Posted On: 02-10-2014, 09:43 PMluigi90210 liked post by Chuck33079 On thread : Maf pipesSo you fixed the problem that had you seeing 160 degree IATs?Liked On: 02-10-2014, 11:24 PM
Posted On: 02-10-2014, 09:52 PMluigi90210 liked post by Rusty On thread : Do i need to replace the clutch when a CSC brakes?If the flywheel got soaked. You can parts clean it and steam it for good measure. Then check for hot spots.Liked On: 02-10-2014, 06:12 PM
Posted On: 02-10-2014, 06:00 PMluigi90210 liked post by 1slow370 On thread : Anyone tell me how bad this head/valve is?clean the carbon check for cracks and warpage, looks like in needs spark plug hole repair, check to see if the valves are bent or rusted, if the valves are good its fine. Its very hard to get the...Liked On: 02-10-2014, 05:03 PM
Posted On: 02-10-2014, 03:47 PMluigi90210 liked post by 1slow370 On thread : Do i need to replace the clutch when a CSC brakes?If the clutch got soaked in fluid then yes. otherwise noLiked On: 02-10-2014, 04:13 PM
Posted On: 02-10-2014, 03:44 PMluigi90210 liked post by Chuck33079 On thread : CARB interest poll:facepalm: Someone sure is, that's for sure. :rofl2:Liked On: 02-10-2014, 04:02 PM
Posted On: 02-05-2014, 10:58 AMluigi90210 liked post by Joe@ZSpeed On thread : How to adjust your clutch pedal Correctly.In our experience removing the helper spring causes issues and is not recommended. It is there for 2 purposes, It holds the pedal at the top to hold the the cruise switch closed while cruising and...Liked On: 02-10-2014, 03:30 PM
Posted On: 03-21-2013, 11:17 AMluigi90210 liked post by synolimit On thread : DIY cai?I just hate the clutter. I did pull the boxes. It does have a nice open almost ram air effect from behind the bumper stock. I do think a few more hp can be picked up though because of a completely...Liked On: 02-10-2014, 05:43 AM
Posted On: 06-15-2013, 12:32 PMluigi90210 liked post by 1slow370 On thread : Nitrous build is finishedim waiting for someone to nitrous with a meth injection system, maybe with a bit of nitro mixed in to really test all the "you'll blow your motor" myths out.Liked On: 02-10-2014, 04:49 AM
Posted On: 02-09-2014, 09:08 PMluigi90210 liked post by George@GTM On thread : Nitrous build is finishedVery nice, are you using a window switch and bottle heater as well? I used to run a 125 shot (wet) in my 350Z back in 04. Zex kit as well. I had it set to spray between 3,000-6,000RPM at 90%+...Liked On: 02-10-2014, 04:48 AM
Posted On: 02-08-2014, 03:32 PMluigi90210 liked post by LNATKFRNG On thread : Nitrous build is finishedI don't have dyno numbers but as my dad used to put it " it pulls like a raped ape" I can't seem to post everything from my phone but the info is: Zex nmu, zex window switch, zex purge, picked...Liked On: 02-10-2014, 04:47 AM
Posted On: 02-08-2014, 03:01 PMluigi90210 liked post by Fulljim On thread : 09 Nismo Z exhaust projectSo most of the parts are in! HKS muffler, Resonators and Berk HFC ! Its all gonna be in 3in polished 409 stainless. I begin tonight by polishing those HFC... Why ? Why not ??? ...Liked On: 02-10-2014, 04:23 AM
Posted On: 02-09-2014, 04:36 PM
All times are GMT -5. The time now is 01:24 PM.