jikhead

Very good idea and good job.

I just did something similar to mine last weekend. I simplified a little by using a 1/2 thick sheet of MDF and cut it out in the same shape as the styrofoam piece that sits on top of the spare. In that I cut the center hole for the exact same Pioneer 10" sub that you used. Once it sits into place (just like the styrofoam piece) I shimmed (sandwiched) some left over 1/2 inch MDF in between another piece of 1/4 inch MDF that I cut out to match the small corrigated piece of plastic that sits on top of the spare and under your carpet. What this did was make a solid deck that when I put the carpet back in, the speaker did not stick up above the floor level. I then put a level guard over the speaker to protect it and now I can put anything back there and don't have to worry about poking the speaker or anything.
The entire project took less than 2 hours and cost less than $20. System sounds great without a speaker showing anywhere.

thanks for all ur posts very helpful

I probably could, however because I've been unemployed for so long...all my belongings and tools are in storage which is about 400 miles away. I'm living temporarily in DFW looking for work down here. So I couldn't even consider it right now until I'm working again, and moved back into my own place. Sorry.

Hey, i'm sorry to be another person asking but do you produce more sub boxes like your own and if so, how much do you charge? Thanks!

ok thanks bro ok i think ill go with a twelve

so would u say getting 2 12''s is overkill.... i guess ill just get one 12... im a lil bit of a bass head

hey bro!!! nice sub install im thinking about getting two of these of maybe one but instead in a z enclosure... how do they sound?

I live about 30 mins from Toronto. There are many great clubs but probably the best club on a Friday/Saturday would be a club called Muzik.

It really depends what days you are going to be in town, if you tell me what night I can tell you what club is the best.

Your sub box is awesome. I planned to have some custom work done when I get back to Fort Hood. How much would you charge for a copy of your box? I was looking to do a 12" sub, but if I can keep the spare and be stealth like you, I will take a 10" sub. You are the man.

Your removal for the rearview mirror instructions are awesome. I'm actually trying to INSTALL the homelink autodimming rearview mirror since I purchased the base model Z. I was wondering though how/where does your homelink wire go to? I know it ends up down in the power junction box on the driver's side near the footrest. But where does it start? Is the line routed through the Center lights to the A pillar or straight to the A pillar? Thanks in advance.

NOTE: Take note that the 7th pop rivot mentioned above is different from the other six. This one has three edge/openings whereas the others are four. If you mistakingly used this 7th pop rivot in...

I've been working on tinting my windows, so I have some write-ups for everybody. I've included pics with instructions on how to remove your door panels, along with some tid bit info on the door...

Continuation.....

I've been working on tinting my windows, so I have some write-ups for everybody. I've included pics with instructions on how to remove your door panels, along with some tid bit info on the door...

NOTE: Take note that the 7th pop rivot mentioned above is different from the other six. This one has three edge/openings whereas the others are four. If you mistakingly used this 7th pop rivot in...

I've been working on tinting my windows, so I have some write-ups for everybody. I've included pics with instructions on how to remove your door panels, along with some tid bit info on the door...

I've been working on tinting my windows, so I have some write-ups for everybody. I've included pics with instructions on how to remove your door panels, along with some tid bit info on the door...

Continuation.....

OK, so wiring it this way is for the foglight to only come on (and flash) while in reverse. If your Z has the wiring harness plug for the fog light, you can utilize that plug and tap into the...

I've been working on tinting my windows, so I have some write-ups for everybody. I've included pics with instructions on how to remove your door panels, along with some tid bit info on the door...

The seat will still go all the way back. That amp works just fine for me and is plently loud for my tastes, and the bridged channels provide plenty of thump to the sub for me. I also don't even...

Continuation.....

I've been working on tinting my windows, so I have some write-ups for everybody. I've included pics with instructions on how to remove your door panels, along with some tid bit info on the door...

I've been working on tinting my windows, so I have some write-ups for everybody. I've included pics with instructions on how to remove your door panels, along with some tid bit info on the door...

I've been working on tinting my windows, so I have some write-ups for everybody. I've included pics with instructions on how to remove your door panels, along with some tid bit info on the door...