Jhill

you can text me at 832 584 7953 for faster response tell me your from 370z forum and i will reply

Did you sell this? or the pumps?

Mr. JHill,

My apologies for not replying sooner. I barely saw this message since you didn't send it to my regular inbox.

Anyhow, thanks so much for your settings, I'm gonna go ahead and give the "Street" version a try and see how I like it. I'll report right after.

As of now, I'm pretty much at stock height, albeit I'm on 18's with smaller diameter tires.
My Rebound settings are 8 front and Rear.
2.0 Front camber 1.8 Rear
0 toe front and a tad in rear.
Sway Bars: Full stiff front and Middle setting on rear. (Stillen).
Car feels very neutral and was able to dialed out a lot of the understeer

Sure thing. When you start the car, it defaults to VDC-on, just like stock. To enable RaceRom:

1. Turn VDC off
2. Adjust the wheel-slip amount using the cruise control accel/decel. When you press up or down, you'll see the current value displayed on the oil temp gauge. It ranges from 0 to 100% (i.e. off to no-wheel slip) depending on what you set it at. I usually start around 50% and adjust from there. You can change it anytime the car is on.

Toe in will increase stability as the thrust are towards the center of the car and the toot (toe out on turns) is less drastic. This is why common auto x setup Yun like -1 degree toe up front but...

Probably saw your car and decided you already have enough people jealous of your high contrast black and white theme. My mtn bike would look perfect next to your car, still looks good by mine but...

The type r will be no joke of a car I'm sure but it's really a different category. I'm too old for a type r now days and won't put up with a manual in Bay Area traffic. I never understand the hate...

Even internally balanced engine gain a smoother run from a damped pully period. There have been internally balanced engines ship with just stamped steel pulleys in the past due for economics...

Even internally balanced engine gain a smoother run from a damped pully period. There have been internally balanced engines ship with just stamped steel pulleys in the past due for economics...

Even internally balanced engine gain a smoother run from a damped pully period. There have been internally balanced engines ship with just stamped steel pulleys in the past due for economics...

Absolutely not. I've been a tech for German and japanese, I'll take my Japanese reliability and costs any day of week. More time enjoying and less time fixing, with that said Porsche are supposed...

I know the right people but it's still about 400.00 a test and I think it gains about 12hp or so. Not sure I'll miss that, car is plenty fast to have fun already.

Cool, did you go to Seb? I got 301 with stock cats. Wish I could go hi flo but really don't want the emissions issues. Never mind thumbnail loaded now.

The installer tool helps too but needs a washer between the hub and tool otherwise the bearing portion hits the hub face. Also stop tightening immediately once it is bottomed out or you'll be in the...

Not sure if this was mentions as I just skim read through this post and did not see it but I believe the stock z radiator cap is about 14psi (Just going from memory and would have to actually check)...

Lol only on one hump on 101 to 85 merger but there is even a warning sign now so I guess I wasn't the only one. Yea I can try tweaking the damping too but that's more a fine adjustment and I think...

See this is why I think a lot is all preference. Littlejuanito is running powertrix 12/11 as am I and I wouldn't want it any stiffer (mine is daily) car right now is firm but comfortable but I did...

Am I the only one that thinks the 370z is kind of a factory wide body already? That said the rivet less one is pretty clean I just hate that wide body now is synonymous with stanced. Why can't the...

Am I the only one that thinks the 370z is kind of a factory wide body already? That said the rivet less one is pretty clean I just hate that wide body now is synonymous with stanced. Why can't the...