gomer_110

Do you have any suggestions for spring rates? I am running motion control non-remote 2 ways with 12kg front and 10kg rear(stock location). Feels really soft to me and i get a lot of body movement. Rear seems pretty loose as well, i removed my rear sway and have 1/16th toe total. I plan on upgrading to the new tomei 1.5 lsd. In my current setup i overpower the sports oem lsd all the time on tight corners.

Thanks again.
Ryan

Having a hell of a time finding suspension settings to run the nismo 19x10.5 et23 wheels with 285 tires square. I found stuff of people using the rims but with smaller tires and no camber angles listed. I plan on running this setup in autox for stu class. Thanks

What was the cost of parts and install for clutch, CSC and flywheel upgrade, if you don't mind me asking?

Hi I have seen ya putting ur sway bars from eibach . And my question is "Are the nismo sway bars not good enough or you are looking at the better handling with eibach?" I think u did front and rear right. I went to a track race a couple weeks ago(my first time). wat happened to me was my nismo was stripping because I was on high speed then brake to make a hard corner. My rear wheels spin twice and I think it's partly cause of my sway bars. I am here to learn so your information would be super helpful. Thanks

Hi, just wanted to say hi. I'm in BG, if you're ever in the area hit me up or if there are any events in Toledo to gather. Thanks.

Dunno, Doran runs a dry sump though.

Looks like I'll have manifold number 2!!! BTW I want that etched into my manifold so I can say its a super rare jdm part ;)

I have the most rare manifold! Only 1 every made!!! Muhahahahaha!

You can buy the front bar only from Hotchkis....

no, they removed the fuel tank as they did the steering lock.

Inside of the '12 is the same. There is no change from Nissan

Ill Just Leave This Right Here !!!! Remember to join us on Facebook and we will be at ZDAYZ X 1715 Shuckstack Rd !!!!! 68517

The FI exhaust doesn't hang any lower than the stock exhaust.

More information about headers and why I think OBX headers is the equivalent of throwing your money in a fire Article1 (http://www.kengineering.info/header%20design%20article.htm) Article Main...

I would think Map 4 would be the best for fuel economy :tiphat:

I have a 2009 repsol cbr 1000rr. Full yosh exhaust, pcv, pazzo levers, Galfer pads, rotors and lines. Love that bike

:bowrofl: :inoutroflpuke: I feel like I must give you my money just to give this deal/post the worship it so rightly deserves... :inoutroflpuke: :inoutroflpuke:

You don't have to lift the car. (http://www.the370z.com/diy-section-do-yourself/5294-diy-front-bumper-removal.html) You can get a ratchet under there.

my rare part.. steering lock that actually works :tup: http://www.the370z.com/members/kenchan-albums-random-picture58391-unknown.jpg

peeping-tom I am billing 200 dollars an hour right now to sit and play on the forum because the people I need to talk to are not here yet.