Gibby1113Enthusiast Member |
Last Activity: 09-07-2018 12:27 AM
- User Lists
Visitor Messages
Showing Visitor Messages 1 to 9 of 9
-
01-24-2013 06:41 AM - permalinkredline727Not necessarily I had mine done at shop with my first one. I had SS rolled tips before I had the Ti tips. And they put the passenger tip on to far and made the tips appear to be uneven. Just enough that it was noticeable to me. And at first I let it go. But after a while it drove me nuts bc I knew it was most noticeable to people driving behind me and that doesn't look good on such a nice car. So one day untried to pull the tips out to the length Invidia designed them and that side I could not get off for the life of me. I got so frustrated I just ordered another rear section and beat that one with a hammer hahaha. Then I put on that rear section my self and made sure the tips were on perfect. I actually prefer them stick out the way Invidia made it. But that's just me I guess.
-
01-22-2013 07:31 PM - permalinkredline727The tips come uninstalled you put them and can push them in further if you want. It's not the easiest task bc they are meant to stick out past the bumper but it can be done. Just be careful bc if you push to far its near impossible to pull them off again. Also if you push to far in on the passenger side bc of the bend in the tail pipe it will make the tips to appear to be uneven.
-
01-22-2013 04:59 AM - permalinkredline727No, it is just a more restrictive HFC. The higher the cell count the more filtering material it has. But 300 cell is still way less restrictive then stock. Hence the reason HIGH FLOW cat.
-
01-21-2013 05:34 PM - permalinkredline727Not raspy at all IMO, you do hear the hiss sound on decel which is typical on any HFC or TP but that's it. They are 200 cel non resonated. As far as the throttle response I can't really say bc I went from test pipes to HFC so to me the TP felt better. But I'm sure going from stock exhaust to HFC and CBE it will feel great.
-
01-20-2013 08:36 PM - permalinkredline727Yeah that exhaust is really nice but between the cost, wait time, and how some people say they scraped it before I went with the Invidia. The quality has been great from all 3 of the products I had from them. Their customer service was great too. There was a leak from the flex sections in the x-pipe and they replaced both pieces for me under warranty no problem. They even recently redesigned that section doing away with the flex pipes and they made sure to tell me to wait for the new design so I didn't have to worry about it happening again.
-
Sweet. I am looking into the F.I TDX CBE and was on their website. It says that they modified their exhaust to rest a little higher than their earlier models due to the fact that some people had been scrapping theirs. Would you happen to know anything about that?
-
01-20-2013 05:44 AM - permalinkredline727From what I have read with a good tuner you may sacrifice some top end whp but will gain some very usable mid range whp. Most seem to say that I read that have it sacrificing a few hp up top (we are talking like beyond 7k in the rpm) is well worth gaining the mid range hp. It is more useable hp especially for these guys that track. Seems like a nice mod.
-
01-19-2013 08:42 PM - permalinkredline727I'm sure Osiris gives you the option. But I couldn't begin to tell you how. I paid for a custom Uprev tune at the shop I go to, so the tuner took care of everything. As far as what you will make its tough to say I made 335whp and 265tq on a Dyno Dynamics Dyno. With the K&N's, Invidia Gemini CBE, Invidia Test Pipes, and Uprev. I haven't been back to the Dyno since I had the HFC's put on. But I'm sure it's a little less. Results are different from dyno to dyno and mod to mod. Important thing is that you make more power and have a the best power curve your tuner can get you. I'm sure the Osiris is great but I would find a shop with a great tuner and just have someone do it on the Dyno. Bc I believe with Osiris you data log your car then send in your data and they send you a map to install. To me it just seemed easier to go to a shop.
-
01-19-2013 06:38 AM - permalinkredline727@gibby1113 when my car was tuned I actually had Invidia test pipes installed the same day. My check engine light did come on. Then when they tuned my car they disabled the rear O2 sensors so the light would go off. Shortly after I had to switch to HFC's to pass state inspection since the rear O2's were already disabled I can't say if they would through the light or not. But I do know that the Invidia HFC's are only 200 cell which is the least restrictive I could find so I'm pretty sure they will throw a check engine light. But if your definitely gonna get an uprev tune the tuner can disable the rear O2 sensors and light goes out anyway
About Me
- About Gibby1113
- Location
- On open empty highways
- Drives
- 40th anniversary
-
Signature
- 40th anniversary #450/1000 | Takeda Attack CAI | Ark DTS exhaust | to be continued...
Friends
Showing Friends 1 to 4 of 4
-
- Joe711
- Base Member
-
- redline727
- Base Member
-
- SS_Firehawk
- Premium Member
-
- tiger123
- Enthusiast Member
Likes Given
358 Likes
-
Gibby1113 liked post by kenchan On thread : damages from bottoming out for being too lowthought you lowered guys thought lowering your car was cool for the sparks.Liked On: 03-12-2014, 11:57 PM
Posted On: 03-12-2014, 03:52 PMGibby1113 liked post by pfdaxe On thread : DIY: Parking Light LED InstallI get my bulbs from Autolumination: 194 Bulbs 168 W5W 2825 Map Led Parking Signal Side Marker (http://www.autolumination.com/194.htm) Order any of the "Super White" 194 bulbs from this page and...Liked On: 03-12-2014, 11:54 PM
Posted On: 03-04-2014, 08:32 AMGibby1113 liked post by ka24king On thread : Looking for Input on Silicone PCV Breather Hosesis will cause no issues what so ever. and there are alot of unnecessary things in our engine bay those being a prime example. there main purpose i believe is just for sound supression and previously...Liked On: 03-10-2014, 12:37 PM
Posted On: 03-10-2014, 12:14 PMGibby1113 liked post by luigi90210 On thread : Fast Intentions CF Scratched :(And this is why I stay at stock height, sucks to see that OPLiked On: 03-09-2014, 06:20 PM
Posted On: 03-09-2014, 02:17 PMGibby1113 liked post by ka24king On thread : Fast Intentions CF Scratched :(My right can had a nice quarter size flat spot the low life is not so fun sometimes :pLiked On: 03-09-2014, 06:19 PM
Posted On: 03-08-2014, 12:31 PMGibby1113 liked post by Jordo! On thread : Stainless Less PPE Long Tube Header w/ extra welded bungFree bump -- seriously, like 30 whp and amazing sound for less shipped than the cost of most cat backs. Somebody jump on this.Liked On: 03-09-2014, 05:16 PM
Posted On: 03-09-2014, 03:24 PMGibby1113 liked post by Chuck33079 On thread : I need help selecting new pads&rotors...He's not saying yank the handbrake to drift. He's saying use it to hold you in place as opposed to the brake pedal so you don't fry your rotors.Liked On: 03-09-2014, 03:17 PM
Posted On: 02-26-2014, 05:13 PMGibby1113 liked post by F.I. Inc. On thread : Fast Intentions CF Scratched :(Wow, what a burn! The scratches look very minimal. You can buff the "white" out with a good polish. If you do not contribute to the scratches anymore, you should be more than fine. As for the...Liked On: 03-08-2014, 11:28 AM
Posted On: 03-08-2014, 08:40 AMGibby1113 liked post by shaun66 On thread : DIY: Z1 Intake Plenum and Spark Plug Swap [Picture Heavy]Sounds really shitty for 300 bucksLiked On: 03-06-2014, 08:54 PM
Posted On: 03-01-2014, 05:16 PMGibby1113 liked post by zefaulter On thread : Tail light modDefinitely(I think)! I just have to talk to my plastic guy lol I was looking at something like this: http://i35.photobucket.com/albums/d173/Pooya66/Untitled.jpgLiked On: 03-06-2014, 10:40 AM
Posted On: 03-06-2014, 07:02 AMGibby1113 liked post by fuct On thread : Tail light modhaving your brake lights come on fast and bright is a safety issue. i want people behind me to know im stopping!Liked On: 03-06-2014, 10:37 AM
Posted On: 02-26-2014, 09:01 AMGibby1113 liked post by Chuck33079 On thread : Pro's/Con's Clear BraJust get the whole hood wrapped. Extra paint will still chip.Liked On: 03-06-2014, 10:30 AM
Posted On: 03-05-2014, 09:07 PMGibby1113 liked post by FPenvy On thread : s30 Styling, on a z34...is this serious? please for all that is holy let this be a troll. if this is serious then please proceed to :gtfo2: we've had enough rice already this month and it's only the 6th. :facepalm:Liked On: 03-06-2014, 10:25 AM
Posted On: 03-06-2014, 07:40 AMGibby1113 liked post by DEpointfive0 On thread : s30 Styling, on a z34...Hideous, kill it with fire.Liked On: 03-06-2014, 10:24 AM
Posted On: 03-05-2014, 10:52 PMGibby1113 liked post by FrostyNaples On thread : Stillen CBE Installed (2013 Z)On my Birthday, best present ever, got the Stillen CBE installed (last week). :cool: After many youtube viewings, sound clips, and user reviews, I knew before I bought it, this was the one. AND...Liked On: 03-05-2014, 11:33 AM
Posted On: 03-05-2014, 11:28 AM
All times are GMT -5. The time now is 02:45 PM.