critical

Can you recommend a good shop in the South Bay (Chula Vista) area for periodic maintenance (coming up to 100,000 miles)?

Hi,

I am french, sorry for my english...
http://www.the370z.com/engine-drivet...ar-review.html

The 7 automatic 370z gearbox have "downshift rev matching" - DRM , it permit synchro between engine and gear box during downshift.

you change the final drive (9,97% --> 47/14 to 48/13).
your pumpkin is from a 2009 370z manual transmission.
on the pumpkin, there are 2 sensors for ABS and speed.
on 350z there are 46 teeth for ABS.
on 370z there are 48 teeth for ABS.
from i understand, you have the thoots number needed, and respect needed for 370z ABS.
the only problem can come from final drive (9,97% --> 47/14 to 48/13).

Does "downshift rev matching" function change or run or not?
any problem, impact or not ?
all is ok to 7500 rpm for change gear?
do you make ecu reflash for solve "downshift rev matching" problem ?

at how many prm, what RPM value it not run?
what happen?


Else, all is ok..

Thanks
Best regards
Xavier

Hello,
Interested in your sport Rays for $899? Would you take $700 and if so I'd be driving from the LAX airport area, needing to box the wheels and return to LAX airport to check them home. Do you know approximate drive time from you to LAX airport?
Text or call if you like:
Steve 253-223-5490

I noticed on your profile that you have a 7AT and a Quaife/gears. What type of setup is that? I would like to run a set of lower gears (3.9 or 4.08).

The Evo-II-US fits fine, and would even fit with all the stock plastics in place, but the Evo-III almost certainly wouldn't.

Are you really awake right now?

your pm box is full

Hey. Saw your post about that clicking sound in your front driver wheel. Just checking if it has come back since you tightened (the control arms?) Anyways hit me back please. I just developed it yesterday after 2 years owning the car. I left a message on that thread too if you wanna check that out.

hi, crit...to be honest, i hadn't thought about pics but, you're right, i should have them...give me a couple of weeks as i just ordered the second cover, and, the LED lights are on their way...(plus, baby needs a bath...)

thanks! i'll keep note of that.

The mustang didn't make the list because it doesn't kill occupants... only bystanders :eekdance:

The Z is a car that is affordable (once used) and offers a good amount of power at the price point. To boot, it is rear wheel drive and a lot of young guns and first timers do not know how to handle...

I am thinking that the new Supra does have the same HP as the new 385hp bmw z4. I am hoping Toyota comes out with a manual in the next 2 years as this is going to be my next car.

Grossly UNDERRATED horsepower coming out the Supra. It dynoed 339hp 421ft lbs tq at the wheels. That explains why people are bucking around in the Supra like in my camaro. This is how a sports car...

Nice review. Given the specs a decent track machine not just focused on speed but all around performance as predicted by the press reports on the pre-production testing allowed press drivers in...

Saw this in Stevenson Ranch right in front of Starbucks/Jamba Juice -- Florida plates. https://farm6.staticflickr.com/5680/21372719406_81918ae3b9_b.jpg (https://flic.kr/p/yyCLSb)20150913_185644...

That depends on your drop height. +22 offset with 285 tires will be tucked in if you're lowered but if you're sitting on stock height it should look ok. I have +22 offset (w/ 15mm spacers) with 305...

https://farm1.staticflickr.com/634/20853220553_8321baa4fa_c.jpg Excuse the dirty car.... it rained yesterday and didn't have time to wash today :shakes head:

I was going to go the route of building custom hardware, but then I searched for refurbished Android tablets and ended up finding a Galaxy Tab 4 (7" tablet) for under $100. I'm pairing that with an...

I've updated my dropbox spreadsheet (https://www.dropbox.com/s/cfpzb2mpj42q6ug/370Z%20CAN.xlsx). I was able to use the 745 CAN address and the 30 command to control a lot of things in the car: open...

Had an incredibly fun weekend w/ Driver's Edge @ Texas World Speedway (a week ago; I finally got around to uploading video today!). I swapped back to the stock rear sway and tightened up my damper...

So I factory ordered a white 15' Sti in February. I live in Pittsburgh and got all of my work done at Moore performance shop and was stage 2, 315 whp/345 wtq at 3k miles, custom tba, el headers, cai,...

Yes, the 350Z uses different diff flanges than the 370Z. The 350Z uses bolts, washers and nuts to fasten the diff stubs to the axles, where the 370Z just uses bolts that thread into the flange assy...

https://farm9.staticflickr.com/8745/17032749520_0ed3270116_h.jpg https://farm9.staticflickr.com/8688/17012853427_332778df11_o.jpg ...

WTF IS THIS ? u crack ur flex plate and u go ahead and make urself a new better one. i envy this.