chops

Hi, ive been searching but can't find anything. How did you get those seats to fit? I've been lucky enough to get myself a pair but can't for the life of me get these fitted �� Please help

I made new PM space

Daaamn, those are some nice seats you have!

Do you have the specs for your custom sub box?

Hey Chops, just checked out your back up camera online and it looks sweet, I actually added the Kenwood CMOS-300 to my 08 Infiniti G37S coupe, but your setup looks much closer to factory plus both our cars use the same license plate lights, can you still get this camera, with the guidelines, etc and if so how much? Thanks!

depends on the LSD.. there is a whole thread stickied at the top dude http://www.the370z.com/engine-drivetrain/89251-definitive-differential-thread.html

diff is all buttoned back up and found an exhaust leak on the ark's resonators that are above the main muffler. had it welded back at a local shop so it delayed me from starting the car up. first...

its an LSD. dropped the pumpkin the other night, it's at a rear end shop getting the wavetrac, new bearings/seals, nismo cover installed :). the diff is surprisingly VERY easy to remove once you...

phunk may be working on a new baffled oil pan, something you'd probably want anyway if you're going boost. otherwise, you can always do an oil pan spacer: ...

woops, forgot. yea, you wont need any axle stubs with a quaife. they have specific models for base or VLSD replacement. you'll still need the other stuff though. bushing is definitely recommended as...

depends on what you need. im a big fan of JL's overpriced XD500. class D (digital) amp that is small, low heat and has been bulletproof for the last 5 years. i have it in my car running a pair of...

its an LSD. dropped the pumpkin the other night, it's at a rear end shop getting the wavetrac, new bearings/seals, nismo cover installed :). the diff is surprisingly VERY easy to remove once you...

its an LSD. dropped the pumpkin the other night, it's at a rear end shop getting the wavetrac, new bearings/seals, nismo cover installed :). the diff is surprisingly VERY easy to remove once you...

seals, bearings, axle stubs, diff cover (suggested). i'm installing my wavetrac this weekend, and i've got quite a few supporting parts ready: an entire rebuild kit (seals, all new...

i get some from motosport yesterday for about 17/bottle since i needed some motul 300 75w90. then again, i locally get them at motorcycle shops for 18/bottle

your vents are emitting warm air, because the fresh air intake for your ventilation system is right in the windshield and partly the engine bay. lowering your oil temps will not lower the temp of the...

an FYI for people who are confused by axle stubs and what not.. if you are upgrading from a VLSD to an OSG/Wavetrac/Cusco etc you'll need an additional driver side stub (part #38220-JK01B or...

woops, forgot. yea, you wont need any axle stubs with a quaife. they have specific models for base or VLSD replacement. you'll still need the other stuff though. bushing is definitely recommended as...

woops, forgot. yea, you wont need any axle stubs with a quaife. they have specific models for base or VLSD replacement. you'll still need the other stuff though. bushing is definitely recommended as...

the first thing i did when i got my car was look to see if beatrush made a replacement underpanel. sadly that was 4 years ago. i dont think you can beat zspeed's underpanel, but if you can, im all...