bkjunk

Yea i installed it. Fitment was ok. The gap between the radio console bezel and the CS bezel is a bit larger than I like. Other than that its ok. Also the screen will fit further back then if you got the OEM nav bezel. Thats another thing that I didn't like. I installed a Nexus 7 tablet using a one of those cheap booklet cases as a mount then strapped a metal strip to the back to mount it in place. You also have to sand down the bezel where the tablet screen touches because on the CS console there is a small lip.

Yes actually! I was not able to put as much time into this as I wanted over the last few weeks due to other life and work responsibilities. Adulting is lame sometimes... While playing with the...

Here are some pictures that I took during my lunch break at work. I made sure to get some angles of both the front and rear cameras. From some of the pics, you can see that the cameras are...

I am a leafblower guy as well, but occasionally I will wash inside the garage (depending on weather, time of day, ect.) so a good quality drying towel is a must.

I shoot the carry mag load every 3 months or so and cycle in new ammo. That also serves to test it in your firearm and you can feel confident that it is going to shoot that ammo reliably. Never a...

couple of suggestions: You only need to grind the "inside" of the slot (the side that faces toward the center of the car) on both the front and back end of the toe bolt mounts. (four grinding...

Pics?

Google, type in: site:the370z.com xxx Where the "xxx" is what you want to search for

http://s3.postimg.org/glevktr6b/IMG_0519.jpg (http://postimg.org/image/5lto980r3/full/) free image uploading (http://postimage.org/)

Just wait until you get the stickers. 15 extra HP! Each!! :)

So I've had this concept of a tablet install for a about a year now. I was originally going to do it on my Eclipse but I ending up selling it and bought a Z. I have the base model Z, no nav. I really...

Most of my swirls came as a dealer installed option.

Seibon. Not as tall as EVO-R. Exact copy of Nismo wing, but without the middle bar. http://www.stillen.com/prodfiles/RS0910NS370-NSM~photo.2.jpg

i definitely just heard about this thread, and so, I shall post.... https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/10151920_10203540531624525_1607092825129097884_n.jpg Ruger...

Had my first ever photoshoot for any car I've owned. A really good friend of mine that I havent talked to in years turns out to be a photographer now! Rolling Shots! :tup::excited: ...

Yes this is ANOTHER cubby tablet build... I'm putting in a Galaxy Note 8. I bought the tablet specifically for this build. I've had it for about two weeks and the software is running beautifully....