ANMVQ

See you have the exoticspeed exhaust on your sedan..i do too..also with maf tubes and hfc's...how do you like the sound...im kind of torn...exhaust looks beautiful but sounds kind of ricey.

Your PM box is full!!! ;-(

Where do you go from your tuning? Kaizen? Who was the tuner?

NVM they have different part numbers

Still have Your CB for sale?

Hey, I heard you have the stillen sc kit with 7at tranny. I'm looking at doing the same thing, but I heard the tune that stillen sends you with the kit doesn't give you full potential? Did you use the stillen tune or did you get a custom tune? Thanks

if you dont mind me asking how much was install on the sc?

hey what kind of deal did you get on your exoticspeed? i had it on my DE 350z and loved it. But from the video on youtube it is really quiet from the one i had. i want loud. would you say this exhaust is loud for the HR motors?

Still have an extra set of spacers? PM me.. Thanks!

Lol That sounded great on the dyno!! Can't wait for my tune and to take videos of that!!!

Your dyno must read really high to get 333rwhp and 273 ft/lbs of torque before a tune. Also a 3rd gear pull that kinda shows a bit of inexperience, 370z should do 4th gear pulls. i know its a mustang...

This time around I'm using GTM Kit. Should be fun.. I liked the larger heat exchanger you used, we got one for Kelly's car but ran out of time to put it on. He moved to Kentucky. The sheep got...

If you want to increase cooling in the intercooler take off the stock lines and add AN 12 fittings. Change out the fittings on the water res, intercooler and run the thicker lines to and from the...

1st one show's were he needs to clearance the block. I installed the SC 6 times before getting right tension. Install with belt little loose, as you tighten the bolts the plate will flex and tighten...

Man I wish I had more. My laptop died last year and i lost a ton of the build. No matter. They call i can walk them threw it all. First three are Osiris.

That does sound really good! What catback do you have ? Sent from my iPhone using Tapatalk

Not to mention the fact that Greddy will have an improved kit on the market soon. I can't imagine why no one wants to pay you thousands over what you paid for a kit that will be replaced with a...

Thanks for the compliments! Doing the SC install.... easy... Getting my pics to upload right side up... way beyond my capabilities!! :confused: The MAF sensors are located just under the equator...

Mikeeeey !!! Everything we have been saying is true ... I dyno'd at 483 whp after the $k$$$'s upgrade ... Made only 63 whp over the original Stillen kit (420 whp). Gained only .1 sec at the...

I am almost 100% certain your stock engine will not lost long if you upgrade that kit so here goes another 5-7k. Enjoy the car mikey, the headache and agony that I went through when my engine went...

I was fully 'bolted' and then went 'boosted'. There is no comparison:driving:

https://33.media.tumblr.com/14ae04a78743347bda59d7dc0b3eef11/tumblr_nctnyaEk8c1rhjw0do2_r1_400.gif https://33.media.tumblr.com/1917ea45b2eb21158e441e60b8faf033/tumblr_ncrlj1cM701s8t0p6o1_500.gif...

I'm just about finished with my Stage 1 SC build, but I was not able to obtain ECU Flash files from GTM. Wondering if I can get advice as to what I need to do to the ECU before I do the initial...

Hey John, I just sent you an email. I can make the drive over to you as soon as this week if that works with you.