Mozen's Build V 2.0

Mozen · 07-27-2015, 02:38 PM

Ive also added Custom LED lighting to the foot well and spruced up the back abit. The old BC BRs needed to be adjusted so i had cut holes to do it. Now thats not an issue but i didn't want to buy all new panels to fix the holes. What i did instead was cut some alcantara that my wife sewed up and wrapped it around some headliner foam and then around a double thick piece of cardboard. Added velcro and boom...custom covers. I did the same for the holes around the struts for the roll cage and added two adjustable and removeable pads for the roll bars themselves.

Mozen · 07-27-2015, 02:44 PM

Lastly this weekend i got the car tuned at Ptuning and MAN is it a night and day difference. E-tuning while i was in Germany was the only way to go but now that i moved back to the US it was a must to get into a professional shop and get the car running right.

Dyno was a Dyno Dynamics with NO calibration factor so numbers are lower than i would see on a Dynojet. That said i am very happy with how the car is running now and everything is so very smooth.

carlitos_370z · 07-27-2015, 02:52 PM

great build dude!

subscribed!

Mozen · 07-27-2015, 08:38 PM

Snapped a pic to show the Shift ring done in CF, the new spacer under the shift knob, boot, the Tein Controller and LED Footwell lights.

The Tein EDFC is mounted on a steele ball with magnet so i can turn it or adjust it yet its fully supported and secure. I moved the Hazard button to the other side of the shift ring.

TerribleONE · 07-27-2015, 08:52 PM

That cage is so sexy. I need to find someone to build me one.

carlitos_370z · 07-28-2015, 06:46 AM

awesome!

Mozen · 08-13-2015, 07:01 PM

Bit of an update. Wife and I installed the new CF Wheel. I finally got the switch plate covers in along with the center shifter ring. My Zoom Rear view Mirror came in and got installed plus you cant see it but i added CF meter button covers. Lots of CF! The zoom mirror is a big improvement for me as far as sight goes. With the roll cage i could not see much out of the back...still cant see full mirror but after more adjustment its a huge difference from what it was.

carlitos_370z · 08-14-2015, 06:42 AM

nice mods dude!

07-27-2015, 02:38 PM	#31 (permalink)
Mozen Track Member Join Date: Jun 2010 Location: Newport News, VA Posts: 820 Drives: Nissan 370z PW M6 Rep Power: 17	Ive also added Custom LED lighting to the foot well and spruced up the back abit. The old BC BRs needed to be adjusted so i had cut holes to do it. Now thats not an issue but i didn't want to buy all new panels to fix the holes. What i did instead was cut some alcantara that my wife sewed up and wrapped it around some headliner foam and then around a double thick piece of cardboard. Added velcro and boom...custom covers. I did the same for the holes around the struts for the roll cage and added two adjustable and removeable pads for the roll bars themselves. Hotrodz likes this. __________________ PW 370z \| AEM \| MISHIMOTO \| ARK PERFORMANCE \| WHITELINE \| NISMO \| STILLEN \| FORGESTAR \| BC RACING \| AMS \| NON STOP TUNING \| CARBONETICS LSD \| 4 Point DOM 1.75" SCCA Spec Roll Bar + Harness Bar CHECK OUT MY BUILD THREAD HERE

07-27-2015, 02:44 PM	#32 (permalink)
Mozen Track Member Join Date: Jun 2010 Location: Newport News, VA Posts: 820 Drives: Nissan 370z PW M6 Rep Power: 17	Lastly this weekend i got the car tuned at Ptuning and MAN is it a night and day difference. E-tuning while i was in Germany was the only way to go but now that i moved back to the US it was a must to get into a professional shop and get the car running right. Dyno was a Dyno Dynamics with NO calibration factor so numbers are lower than i would see on a Dynojet. That said i am very happy with how the car is running now and everything is so very smooth. GZ3 and Doug@PTUNING like this. __________________ PW 370z \| AEM \| MISHIMOTO \| ARK PERFORMANCE \| WHITELINE \| NISMO \| STILLEN \| FORGESTAR \| BC RACING \| AMS \| NON STOP TUNING \| CARBONETICS LSD \| 4 Point DOM 1.75" SCCA Spec Roll Bar + Harness Bar CHECK OUT MY BUILD THREAD HERE

07-27-2015, 02:52 PM	#33 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7585	great build dude! subscribed! Mozen likes this.

07-27-2015, 08:38 PM	#34 (permalink)
Mozen Track Member Join Date: Jun 2010 Location: Newport News, VA Posts: 820 Drives: Nissan 370z PW M6 Rep Power: 17	Snapped a pic to show the Shift ring done in CF, the new spacer under the shift knob, boot, the Tein Controller and LED Footwell lights. The Tein EDFC is mounted on a steele ball with magnet so i can turn it or adjust it yet its fully supported and secure. I moved the Hazard button to the other side of the shift ring. carlitos_370z likes this. __________________ PW 370z \| AEM \| MISHIMOTO \| ARK PERFORMANCE \| WHITELINE \| NISMO \| STILLEN \| FORGESTAR \| BC RACING \| AMS \| NON STOP TUNING \| CARBONETICS LSD \| 4 Point DOM 1.75" SCCA Spec Roll Bar + Harness Bar CHECK OUT MY BUILD THREAD HERE

07-27-2015, 08:52 PM	#35 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	That cage is so sexy. I need to find someone to build me one. carlitos_370z likes this. __________________ 638WHP 541WTQ @ 13.5PSI Build thread

07-28-2015, 06:46 AM	#36 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7585	awesome!

08-13-2015, 07:01 PM	#37 (permalink)
Mozen Track Member Join Date: Jun 2010 Location: Newport News, VA Posts: 820 Drives: Nissan 370z PW M6 Rep Power: 17	Bit of an update. Wife and I installed the new CF Wheel. I finally got the switch plate covers in along with the center shifter ring. My Zoom Rear view Mirror came in and got installed plus you cant see it but i added CF meter button covers. Lots of CF! The zoom mirror is a big improvement for me as far as sight goes. With the roll cage i could not see much out of the back...still cant see full mirror but after more adjustment its a huge difference from what it was. Doug@PTUNING, carlitos_370z and Memphis370Z like this. __________________ PW 370z \| AEM \| MISHIMOTO \| ARK PERFORMANCE \| WHITELINE \| NISMO \| STILLEN \| FORGESTAR \| BC RACING \| AMS \| NON STOP TUNING \| CARBONETICS LSD \| 4 Point DOM 1.75" SCCA Spec Roll Bar + Harness Bar CHECK OUT MY BUILD THREAD HERE

08-14-2015, 06:42 AM	#38 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7585	nice mods dude!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Possible Nos build	triadz	Forced Induction	7	04-06-2012 10:30 AM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 05:24 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM
You can build it..	bossman	Nissan 370Z General Discussions	1	01-03-2009 05:31 PM