NickTurnon's 370z Build

NickTurnon

Removed the black plasti-dip from the fangs: Lasted 2 years! Had about 8 coats though..










Installation was fairly simple,
1) We test fitted the lip
2) Drilled 2 screws into the far corners where they attach to the wheel well.
3) The left side was flush and perfect, didnt require much heat
4) The front was great and was flush with the fang area, minor heat and application
5) The right was pretty bad and needed some heat and patience. Basically we heated the lip til' it was soft and used a metal ruler with a cork backing and held the cork to the lip and then used a cold/damp rag to let it mold into place.
6) Once the top was flush, we then jacked the car up and went under to attach the 3 support brackets.
7) I used the 3M tape at first, but then once the lip was on, barely any of the lip needed the 3M and it really just was visible thru the cracks, so I removed the 3M tape completely.
8) Done!

__________________
2009 Brilliant Silver BASE 7AT | TEIN S-Tech Springs | K&N Drop Ins & z1 Maf Tubes | AAM S-Line Short Tails | 5% Tint | 20MM Spacers | Sport Spoiler NickTurnon's 370z Build