GaleForce's build

jwick · 03-18-2014, 12:10 PM

Awesome. I won't need it for initial build but I do need to bring the table and all the springs to my tuner so we can adjust it if necessary as we play with EBC settings.

GaleForce · 03-19-2014, 11:49 AM

Quote:

Originally Posted by jwick

Awesome. I won't need it for initial build but I do need to bring the table and all the springs to my tuner so we can adjust it if necessary as we play with EBC settings.

Yeah I thought the same way and took the springs to R/T Tuning when I went for the tune. They didn't need them. Better to take them and not use them, than leaving them at home and needing them.

GaleForce · 03-19-2014, 11:52 AM

Bought the Greddy Oil filter relocation plate with thermostat. It was nearly impossible to get the oil temps up last fall. Should be good now.

6MT · 03-19-2014, 02:36 PM

jwick · 03-19-2014, 08:39 PM

Quote:

Originally Posted by GaleForce

Bought the Greddy Oil filter relocation plate with thermostat. It was nearly impossible to get the oil temps up last fall. Should be good now.

Sasha supply the braket for you?

GaleForce · 03-19-2014, 11:26 PM

Quote:

Originally Posted by jwick

Sasha supply the braket for you?

Nope. I'll be making my own. Do you have pics of yours?

GaleForce · 04-01-2014, 07:25 PM

Thinking of selling my wheels.

Wiggins3377 · 04-01-2014, 07:53 PM

Quote:

Originally Posted by GaleForce

Thinking of selling my wheels.

What's next?

jwick · 04-01-2014, 08:44 PM

Quote:

Originally Posted by GaleForce

Nope. I'll be making my own. Do you have pics of yours?

Sorry dude. Just saw this one. I'll send you a picture. Give me a few minutes

GaleForce · 04-01-2014, 09:02 PM

Quote:

Originally Posted by jwick

Sorry dude. Just saw this one. I'll send you a picture. Give me a few minutes

Thanks

Do you have different fittings too? I think the hoses are -8an and the oil filter/thermo plate is -10an, or vice versa.

jwick · 04-01-2014, 09:15 PM

Quote:

Originally Posted by GaleForce

Thanks

Do you have different fittings too? I think the hoses are -8an and the oil filter/thermo plate is -10an, or vice versa.

Sasha modified the fittings for me and yes the GReddy is -10an. You have a couple of options. If you want to buy just one new braided hose, then you can change the fittings on the GReddy to all -8an. What I believe Sasha did was give me -10an fittings everywhere but I've not unrolled all the hoses yet.

Russell Performance - Specialty AN Fittings

Look at the AN port adapters and order one that will transition from -10an to -8an. SummitRacing carries them but you might be able to find them cheaper.

GaleForce · 04-01-2014, 09:24 PM

Quote:

Originally Posted by jwick

Sasha modified the fittings for me and yes the GReddy is -10an. You have a couple of options. If you want to buy just one new braided hose, then you can change the fittings on the GReddy to all -8an. What I believe Sasha did was give me -10an fittings everywhere but I've not unrolled all the hoses yet.

Russell Performance - Specialty AN Fittings

Look at the AN port adapters and order one that will transition from -10an to -8an. SummitRacing carries them but you might be able to find them cheaper.

Great info. Thank you!

jwick · 04-01-2014, 09:24 PM

Grabbed a quick pic from my cell but battery was dying so no flash. Let me know if you want me to send something better.

Looks like its a equal leg angle 3.75"x3.75" and is 2" wide with six holes drill, two to mount the GReddy plate and four to bolt into the frame in roughly same location as the standard one that comes with the kit.

jwick · 04-01-2014, 09:26 PM

Quote:

Originally Posted by GaleForce

Great info. Thank you!

You are welcome. To be honest I didn't do enough research to know if you need -10an to -8an or -8an to -10an.

GaleForce · 04-01-2014, 09:34 PM

Quote:

Originally Posted by jwick

Grabbed a quick pic from my cell but battery was dying so no flash. Let me know if you want me to send something better.

Looks like its a equal leg angle 3.75"x3.75" and is 2" wide with six holes drill, two to mount the GReddy plate and four to bolt into the frame in roughly same location as the standard one that comes with the kit.

Quote:

Originally Posted by jwick

You are welcome. To be honest I didn't do enough research to know if you need -10an to -8an or -8an to -10an.

That's good. I need to find a metal brake for my vice to make the bracket. Finding car parts around here is impossible. I'll have to take the Greddy filter relocator into Toronto to find the fittings I need. It will be worth it in the end. I was struggling to hit 160F oil temps last fall.

03-18-2014, 12:10 PM	#1441 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Awesome. I won't need it for initial build but I do need to bring the table and all the springs to my tuner so we can adjust it if necessary as we play with EBC settings. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

03-19-2014, 11:52 AM	#1443 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51864	Bought the Greddy Oil filter relocation plate with thermostat. It was nearly impossible to get the oil temps up last fall. Should be good now. Mr&Mrs, LMBmikeZ, jwick and 3 others like this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

03-19-2014, 02:36 PM	#1444 (permalink)
6MT A True Z Fanatic Join Date: May 2009 Location: ITU Zone 2 Posts: 22,459 Drives: Reliant Robin Rep Power: 1789	__________________ Andrew 2009 370Z Sport/Touring 6MT sold 2013 Honda Civic Si coupe D/D

04-01-2014, 07:25 PM	#1447 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51864	Thinking of selling my wheels. Wiggins3377 likes this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

04-01-2014, 09:24 PM	#1453 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Grabbed a quick pic from my cell but battery was dying so no flash. Let me know if you want me to send something better. Looks like its a equal leg angle 3.75"x3.75" and is 2" wide with six holes drill, two to mount the GReddy plate and four to bolt into the frame in roughly same location as the standard one that comes with the kit. GaleForce likes this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Z Build	pwrhsms	Member's 370Z Gallery	43	09-09-2013 11:35 AM
Possible Nos build	triadz	Forced Induction	7	04-06-2012 10:30 AM
TT build in Fl	travnflorida	Nissan 370Z General Discussions	3	08-15-2011 05:51 PM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 05:24 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM