John's Sweet NA build

Navyboy916 · 01-11-2013, 07:49 PM

Here are pics of my assembled head with the upgraded valve train, 5 angle valve job and JUN cams installed. GTM sent them to me this morning. They are on the way back to me right now. I cant wait till these get installed next week is when the installation starts. It looks like they will be back in Guam on Tuesday.

TheGreatOne · 01-11-2013, 09:24 PM

very nice, this is quite the build, so curious to see the results and build up to it...

GaleForce · 01-11-2013, 10:54 PM

Quote:

Originally Posted by TheGreatOne

very nice, this is quite the build, so curious to see the results and build up to it...

ts-c63 · 01-11-2013, 11:16 PM

So what are you expecting to be putting down with this build? Any hp goals in mine? I for one can't wait to hear this thing already!!

Navyboy916 · 01-12-2013, 12:02 AM

I really have no idea what the hp is going to be. I know JUN builds great products and so these cams should really open the head up and add significant power to the engine. I am trying to build not just the motor but the supporting pieces as well like the transmission aka. new torque converter and flex plate. I will be posting video and pics as the motor is reassembled and of course the first start up. This has seemed like forever but the excitement is growing. I will also be posting a list of parts and cost for this entire build to hopefully help others make the decision to stay NA.

shaun66 · 01-12-2013, 12:19 AM

Can't wait to see this put together!

BlkNismo · 01-12-2013, 08:16 AM

have you thought about replacing the pistons? Jun posted hp numbers with aftermarket pistons, (maybe rods too?) along with their cams.

simota1 · 01-12-2013, 01:47 PM

i cant wait to see how this thing will perform

great job dood!!!

Navyboy916 · 01-12-2013, 02:51 PM

I have thought about replacing the buttom end but not right now cause my car has only 8,000 miles on it so I want to use it the way it is. When I get back to the states is when I am going to look at building a new block but, for now I will see what this setup will do.

Navyboy916 · 01-13-2013, 12:15 AM

It was confirmed today from the parts manager at Nissan in Guam that my parts are in the air in flight to them will be there for sure on Tuesday. I am so stoked.

Navyboy916 · 01-17-2013, 02:24 AM

I just talked to the Nissan manager today that the parts are here on Guam and installation will start tomorrow I will be posting a lot of pics of the parts being unpacked

GaleForce · 01-17-2013, 08:13 AM

I'm excited for you

Navyboy916 · 01-17-2013, 07:12 PM

Update: I just went to Nissan and unpacked all the parts and they are starting to assemble the motor today so tomorrow I will be taking pics of the parts and motor. This dream is finally coming true for me. I am so stoked

GaleForce · 01-17-2013, 07:13 PM

Awesome!

SS_Firehawk · 01-17-2013, 07:43 PM

W00T! Glad to see some forward progress again.

View Poll Results: Do u like the engine mods or exterior mods?
Engine	29	78.38%
Exterior	9	24.32%
Multiple Choice Poll. Voters: 37. You may not vote on this poll

01-11-2013, 09:24 PM	#2 (permalink)
TheGreatOne A True Z Fanatic Join Date: Jan 2011 Location: Montreal, Canada Age: 48 Posts: 1,980 Drives: E60 BMW M5 Rep Power: 23	very nice, this is quite the build, so curious to see the results and build up to it... __________________ 2017 SUBARU STI 2008 E60 M5 - SOLD 2010 40th Anniversary 370Z - SOLD (and missing her)

01-12-2013, 12:02 AM	#5 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 15	I really have no idea what the hp is going to be. I know JUN builds great products and so these cams should really open the head up and add significant power to the engine. I am trying to build not just the motor but the supporting pieces as well like the transmission aka. new torque converter and flex plate. I will be posting video and pics as the motor is reassembled and of course the first start up. This has seemed like forever but the excitement is growing. I will also be posting a list of parts and cost for this entire build to hopefully help others make the decision to stay NA. simota1, ts-c63 and faya like this.

01-12-2013, 01:47 PM	#8 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 407	i cant wait to see how this thing will perform great job dood!!! __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

01-13-2013, 12:15 AM	#10 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 15	It was confirmed today from the parts manager at Nissan in Guam that my parts are in the air in flight to them will be there for sure on Tuesday. I am so stoked. simota1, GaleForce and roy'sz like this.

01-11-2013, 11:16 PM	#4 (permalink)
ts-c63 Enthusiast Member Join Date: Feb 2011 Location: nyc/nj Posts: 384 Drives: 2012 370z 7At Rep Power: 16	So what are you expecting to be putting down with this build? Any hp goals in mine? I for one can't wait to hear this thing already!!

01-12-2013, 12:19 AM	#6 (permalink)
shaun66 Track Member Join Date: Mar 2010 Location: n Posts: 837 Drives: MB 370z 7AT Rep Power: 18	Can't wait to see this put together!

01-12-2013, 08:16 AM	#7 (permalink)
BlkNismo Track Member Join Date: Sep 2011 Location: USA Posts: 614 Drives: Nismo Rep Power: 16	have you thought about replacing the pistons? Jun posted hp numbers with aftermarket pistons, (maybe rods too?) along with their cams.

01-12-2013, 02:51 PM	#9 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 15	I have thought about replacing the buttom end but not right now cause my car has only 8,000 miles on it so I want to use it the way it is. When I get back to the states is when I am going to look at building a new block but, for now I will see what this setup will do.

01-17-2013, 02:24 AM	#11 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 15	I just talked to the Nissan manager today that the parts are here on Guam and installation will start tomorrow I will be posting a lot of pics of the parts being unpacked simota1 and GaleForce like this.

01-17-2013, 08:13 AM	#12 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51866	I'm excited for you __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

01-17-2013, 07:12 PM	#13 (permalink)
Navyboy916 Enthusiast Member Join Date: Jul 2011 Location: Hawaii Posts: 434 Drives: 2010 370z 7AT Rep Power: 15	Update: I just went to Nissan and unpacked all the parts and they are starting to assemble the motor today so tomorrow I will be taking pics of the parts and motor. This dream is finally coming true for me. I am so stoked SPOHN likes this.

01-17-2013, 07:13 PM	#14 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51866	Awesome! __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

01-17-2013, 07:43 PM	#15 (permalink)
SS_Firehawk A True Z Fanatic Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7336	W00T! Glad to see some forward progress again. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
John's 335i (Again) - 5/15/10	HKYStormFront	Other Vehicles	24	05-18-2010 04:40 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM
Papa John's To Give Away Free Pizza To Camaro Owners!	AK370Z	The Lounge (Off Topic)	22	08-25-2009 07:29 PM