I waited longer than I wanted to, but I finally purchased my next set of Works today. The final specs are as follows: 19x10 -2 (T Disk) and 19x12 -2 (O Disk) both in a full reverse lip. I maxed the lip out in the rears with 5.9 inches and a little over 3.3 inches up front!!! As always, Mark at RavSpec was a huge help through the entire process, I don’t think I'll ever buy a set of wheels without going through him. This is my fourth big purchase through Mark and RavSpec and each experience has been better than the last. Hit him up if anyone is looking for something to spend their tax money on!!!

This pic has been posted before, but here is what they will look like.

:drool: :yum: :tup:

You got that right brother!!!!

those new rims are gonna be tits on ur z

Going to look sweet with that new suspension too.

With those specs are you going to need body modifications and negative camber to fit or are they plug and play?

Sent from my DROID RAZR using Tapatalk

Oh and whats o disk and t disk?

Sent from my DROID RAZR using Tapatalk

nice choices i wished i went with more aggressive rears like you but my fronts are the same offset might be same disk too!

I already have adjustable camber arms in the back and I'll need some up front as well. Im getting the same set up as Punk86, but with a less aggresive tire. So im hoping I wont have to modify the front fenders.

I'll be honest im still not 100% on this, but i believe it's Work's way of determining which wheel will fit over Big Brake Kits. You can ask Mark at RavSepc, he'll be able to help you out.

T,R,L,A,O,W are disk type with T having the max caliper clearance and W will the least caliper clearance.

I really like the deep dish look. I might get me a set but not as aggressive as yours. Don't want to have to buy camber sets for front and rear.

Sent from my DROID RAZR using Tapatalk

... And that's why I wouldn't buy from anyone else. Thanks for the help Mark.


Sent from my iPhone using Tapatalk

If anyone is interested in the potential of getting ahold of a rare piece of JDM art for the Z chime in on the thread below. I was able to talk Bulletproof automotive into starting a feeler thread and in the last day the response has been great. We are looking for a few more to join. I've only seen a few of these in existence, and of course Simota has one of them.

http://www.the370z.com/group-buys/85...ower-bars.html

I spent some more time trying to figure out a good way to set up my air tank and compressor this weekend. If it can't be hidden I figured I'd dress it up a bit. Here is the result. It's really just a couple more bends in aluminum airline, but I like it.

http://img.tapatalk.com/d/14/02/12/ezu9yda6.jpg

http://img.tapatalk.com/d/14/02/12/e9yjysyz.jpg

http://img.tapatalk.com/d/14/02/12/y3erajy2.jpg


Sent from my iPhone using Tapatalk

bends look cleaner :tup:

yeah I think it looks pretty good, plus this will lead the airline away from the center of the cabin where my Bose sub is (it was causing some issues with fitment).

Wiggins3377's 40th Anniversary Z
 

Just picked up a great jdm piece for all you fanatics. I'll share pics when I receive it.


Sent from my iPhone using Tapatalk

What else is there? :rofl2:

I'll tell you if you share what seats you're getting... See what I did there?

I like that! :icon17:

:stirthepot:

It wouldn't be fair to you if I did that. I just got confirmation that my seats are in Canada and will be shipped out to me tomorrow. So you'll find out soon enough. :tup:

I'm really looking forward to seeing what else you have coming.

Another thing. You should message me before pulling the trigger on this stuff. We might be able to get a discount if we buy items at the same time. Chances are we're going to end up with the same thing anyway. :bowrofl:

I bought this used. I'll send you a message.

You're supposed to be on my side, EH!

:roflpuke2:

:hello: :pics:

clean bends man!!! great job :D

I seriously hate you all. You Simota. You GaleForce. You Wiggins.

Stop flossin your JDM swag and give me some time to catch up damnit! :mad:

Haters gon hate.... ;-)

Sent from my SAMSUNG-SGH-I337 using Xparent Skyblue Tapatalk 2

Anyone planning on going to zdayz and have extra space for two?


Sent from my iPhone using Tapatalk

:inoutroflpuke: the JDM junkies on this forum..... me... you... wiggins... galeforce.... :icon17:

I blame you for my addiction... if I would have just stuck with my stillen gen 3's i'd have alot more money in my bank account.

I think its awesome we have these members:tup:
Its not everyday we see decked out 370z in the neighbourhood:driving:

Keep it going:tiphat:

Thanks man!! I always like stalking your thread as well. Have you decided if you'll make it to the Midwest Z Heritage show in the Cleveland area?

That's the one in Aurora June 13-15?
That is a possibility :driving:

That's the one. How long of a drive is that for you?


Sent from my iPhone using Tapatalk

I just checked it out. Looks like a short 4/5hrs for me to The Bertram Inn.
If I can convince the wife, or one of my buddies, or one of my brothers to go with me.....
I'll be there:tup:

Sounds good. I'll plan to make it as well. Although I can probably only make it up on Saturday.


Sent from my iPhone using Tapatalk

That would be the same for myself. IF it all works out, Saturday is the day im shooting for.

Well ups dropped off the item today, but given I work in StL during the week I won't get it until this Saturday. Until I have time to open the box I'll post this up.

Attachment 84243


Sent from my iPhone using Tapatalk

Got my TS strut bar today, gonna try to install it tomorrow. I'm also going to finally get around to installing my coils and cup kit tomorrow.

http://img.tapatalk.com/d/14/02/23/4edu8yty.jpg
http://img.tapatalk.com/d/14/02/23/y8a4u3uz.jpg