Wiggins3377's 40th Anniversary Z

OMGWTFBBQ · 02-22-2014, 08:09 PM

I hate you!

simota1 · 02-22-2014, 09:54 PM

congrats man!!!! where did u find the TS strut bar now ur complete

Wiggins3377 · 02-23-2014, 07:55 AM

Quote:

Originally Posted by simota1

congrats man!!!! where did u find the TS strut bar now ur complete

I still need the TS exhaust!! As well as that brace bar cover, but that is on the way.

Punk86 had a lead on the strut bar. He didn't want it so I jumped on it.

Phdpsy · 02-23-2014, 12:27 PM

That is nice

OMGWTFBBQ · 02-23-2014, 12:56 PM

Let us know if there are any fitment issues!

GaleForce · 02-23-2014, 05:51 PM

Quote:

Originally Posted by OMGWTFBBQ

Let us know if there are any fitment issues!

His has been modified to fit.

Wiggins3377 · 02-23-2014, 05:58 PM

Well we ran into issues with coilover number 4 (front driver side). For some reason we couldn't get the bolt from the end link to go through the bottom of the coil. Any one have suggestions? I though maybe it was because the coils are shorter than the stock strut, but we also had issues getting then stock strut off. I'm honestly lost on this one.

That being said I won't be able to put the strut bar on until I get the issue fixed, which will be next weekend at the earliest.

Sent from my iPhone using Tapatalk

chknhawk · 02-23-2014, 06:19 PM

Same thing happened to me... I think I ended up using a jack to jack up the perch and pusueing it in... I think the trick is to put both at the same time. If you get one side done and in then it makes the other side a complete pain because of the sway bar. Also with the height adjustment is a little bit of a pain. I have the initial settings done but they are a little off... I have my dampers set to full hard (the knobs at the top). I wish I had the air cups on mine because its totally different on the ride heoght and my lip scrapes everywhere. I think you will be impressed with them. Let me know how it goes...

Sent from my SAMSUNG-SGH-I337 using Xparent Skyblue Tapatalk 2

Wiggins3377 · 02-23-2014, 06:21 PM

Quote:

Originally Posted by chknhawk

Same thing happened to me... I think I ended up using a jack to jack up the perch and pusueing it in... I think the trick is to put both at the same time. If you get one side done and in then it makes the other side a complete pain because of the sway bar. Also with the height adjustment is a little bit of a pain. I have the initial settings done but they are a little off... I have my dampers set to full hard (the knobs at the top). I wish I had the air cups on mine because its totally different on the ride heoght and my lip scrapes everywhere. I think you will be impressed with them. Let me know how it goes...

Sent from my SAMSUNG-SGH-I337 using Xparent Skyblue Tapatalk 2

Chknhawk what's your sell number? Send me a message 5135202332

Sent from my iPhone using Tapatalk

chknhawk · 02-23-2014, 06:21 PM

You can also do a step drill and some snap in grommets on the rear pannels for adjustment... I just pulled all my pannels out though.

Sent from my SAMSUNG-SGH-I337 using Xparent Skyblue Tapatalk 2

Mr&Mrs · 02-23-2014, 06:22 PM

I had a similar issue on my passenger side. My sway bar moved and got everything out of wack. I'm not on my A game right now so this may not have anything to due with your question lol.

Wiggins3377 · 02-24-2014, 03:33 PM

I'm picking up a set of 2014 Nismo wheels as my temps until I get my new Works. I think the color will look good with my 40th. These will be back on sale in a month or two. Hit me up if you're interested. I'll be keeping the tires though.

ImageUploadedByTapatalk1393277566.058201.jpg

Sent from my iPhone using Tapatalk

Wiggins3377 · 03-01-2014, 10:47 AM

Slight change in plans. The guy I was supposed to get the nismo wheels from was being a complete DB, so I talked to Mark at RavSpec and I'm getting these instead. I've never seen gold on a 40th, but it can't be that much different from bronze. I'll be posting them for sale as soon as I get them. If you're interested let me know, obviously I won't sell them until I get my Works.

ImageUploadedByTapatalk1393692280.665248.jpg

Sent from my iPhone using Tapatalk

Mr&Mrs · 03-01-2014, 10:56 AM

What are the wheel specs?

Wiggins3377 · 03-01-2014, 10:58 AM

19x9 +22, 19x10 + 25

Sent from my iPhone using Tapatalk

02-22-2014, 08:09 PM	#1 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4551	I hate you! __________________ Zele Performance \| Varis \| Powerhouse Amuse \| Craftsquare \| Tommy Kaira \| Top Secret \| HKS \| Defi \| Volk Racing \| Cusco \| SPL \| Never ending build thread.. PM me if you have rare JDM parts for sale!

02-22-2014, 09:54 PM	#2 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 407	congrats man!!!! where did u find the TS strut bar now ur complete __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

02-23-2014, 12:56 PM	#5 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4551	Let us know if there are any fitment issues! __________________ Zele Performance \| Varis \| Powerhouse Amuse \| Craftsquare \| Tommy Kaira \| Top Secret \| HKS \| Defi \| Volk Racing \| Cusco \| SPL \| Never ending build thread.. PM me if you have rare JDM parts for sale!

02-23-2014, 05:58 PM	#7 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 79	Well we ran into issues with coilover number 4 (front driver side). For some reason we couldn't get the bolt from the end link to go through the bottom of the coil. Any one have suggestions? I though maybe it was because the coils are shorter than the stock strut, but we also had issues getting then stock strut off. I'm honestly lost on this one. That being said I won't be able to put the strut bar on until I get the issue fixed, which will be next weekend at the earliest. Sent from my iPhone using Tapatalk __________________ AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

02-23-2014, 06:19 PM	#8 (permalink)
chknhawk Track Member Join Date: May 2012 Location: Kentucky Posts: 541 Drives: Like a batouttahell! Rep Power: 16	Same thing happened to me... I think I ended up using a jack to jack up the perch and pusueing it in... I think the trick is to put both at the same time. If you get one side done and in then it makes the other side a complete pain because of the sway bar. Also with the height adjustment is a little bit of a pain. I have the initial settings done but they are a little off... I have my dampers set to full hard (the knobs at the top). I wish I had the air cups on mine because its totally different on the ride heoght and my lip scrapes everywhere. I think you will be impressed with them. Let me know how it goes... Sent from my SAMSUNG-SGH-I337 using Xparent Skyblue Tapatalk 2 __________________ \| AEM \| INVIDIA \| GREDDY \| STANCE \| NISMO \| SETRAB \| STOPTECH \| HAWK \| TOYO \| HANKOOK \| BRIDE (wishlist) \|

02-23-2014, 12:27 PM	#4 (permalink)
Phdpsy Base Member Join Date: Jan 2014 Location: Louisiana Posts: 31 Drives: Chicane Yellow Z Rep Power: 13	That is nice

02-23-2014, 06:21 PM	#10 (permalink)
chknhawk Track Member Join Date: May 2012 Location: Kentucky Posts: 541 Drives: Like a batouttahell! Rep Power: 16	You can also do a step drill and some snap in grommets on the rear pannels for adjustment... I just pulled all my pannels out though. Sent from my SAMSUNG-SGH-I337 using Xparent Skyblue Tapatalk 2 __________________ \| AEM \| INVIDIA \| GREDDY \| STANCE \| NISMO \| SETRAB \| STOPTECH \| HAWK \| TOYO \| HANKOOK \| BRIDE (wishlist) \|

02-23-2014, 06:22 PM	#11 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31942	I had a similar issue on my passenger side. My sway bar moved and got everything out of wack. I'm not on my A game right now so this may not have anything to due with your question lol. __________________ Project Z <--Click - Check out the link too many mods to list!

02-24-2014, 03:33 PM	#12 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 79	I'm picking up a set of 2014 Nismo wheels as my temps until I get my new Works. I think the color will look good with my 40th. These will be back on sale in a month or two. Hit me up if you're interested. I'll be keeping the tires though. ImageUploadedByTapatalk1393277566.058201.jpg Sent from my iPhone using Tapatalk __________________ AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

03-01-2014, 10:47 AM	#13 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 79	Slight change in plans. The guy I was supposed to get the nismo wheels from was being a complete DB, so I talked to Mark at RavSpec and I'm getting these instead. I've never seen gold on a 40th, but it can't be that much different from bronze. I'll be posting them for sale as soon as I get them. If you're interested let me know, obviously I won't sell them until I get my Works. ImageUploadedByTapatalk1393692280.665248.jpg Sent from my iPhone using Tapatalk __________________ AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

03-01-2014, 10:56 AM	#14 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31942	What are the wheel specs? __________________ Project Z <--Click - Check out the link too many mods to list!

03-01-2014, 10:58 AM	#15 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 79	19x9 +22, 19x10 + 25 Sent from my iPhone using Tapatalk __________________ AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370Z For Sale 40TH anniversary like new	kingair76	370Z For Sale	4	03-28-2013 06:51 PM
WTB 40th Anniversary	dpmdc	40th Anniversary 370Z	16	05-15-2012 07:36 AM
L.A. 40th Anniversary	ICENINE	40th Anniversary 370Z	9	02-08-2012 11:02 PM
40th Anniversary Z for $33K?	Samich	Nissan 370Z General Discussions	14	08-09-2011 09:01 AM
40th Anniversary	370z4ME	40th Anniversary 370Z	4	02-01-2011 07:54 AM