|
First time on the road since last November. With the SPL subframe bushing and the Bell diff brace. I can hear the diff now. It a racecar type whine on
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
05-06-2019, 07:50 AM
|
#1 (permalink) |
|
A True Z Fanatic
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 70
Posts: 35,571
Drives: 2011 Nismo GM 6M
Rep Power: 2684440   |
First time on the road since last November. With the SPL subframe bushing and the Bell diff brace. I can hear the diff now. It a racecar type whine on going up and down in speed.
__________________
 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
|
|
|
05-10-2019, 10:26 PM
|
#2 (permalink) |
|
A True Z Fanatic
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 70
Posts: 35,571
Drives: 2011 Nismo GM 6M
Rep Power: 2684440 |
Time for the splitter.
 Pic's. Christmas present from the wifey.
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
|
|
|
|
05-10-2019, 10:34 PM
|
#3 (permalink) |
|
A True Z Fanatic
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 70
Posts: 35,571
Drives: 2011 Nismo GM 6M
Rep Power: 2684440 |
1st pic. Removed the bumper.
2nd pic. The "GAP" 3rd pic. No bumper. 4th and 5th pics. Masked off the splitter. 6th pic. Set the bumper down on the splitter and mark the holes and then drill them. 7th pic. Mounting the splitter to the bumper for the first time. The two was bolted and unbolted a number of times for fitting.
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
|
|
|
|
05-10-2019, 10:44 PM
|
#4 (permalink) |
|
A True Z Fanatic
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 70
Posts: 35,571
Drives: 2011 Nismo GM 6M
Rep Power: 2684440 |
1st pic. The bumper and splitter bolted together.
2nd and 3rd pics. Th "Gap" and trying to figure out what to do with it.  4th pic. I tried to use a peice of foam to fit in the "Gap". Gave up on that idea. 5th pic. The stock black plastic under chin. Hmmmm 6th, 7th, and 8th pics. Cut down the black plastic piece.
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
|
|
|
|
05-10-2019, 10:49 PM
|
#5 (permalink) |
|
A True Z Fanatic
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 70
Posts: 35,571
Drives: 2011 Nismo GM 6M
Rep Power: 2684440 |
These pics. Have the bumper mounted to the body. And the splitter mounted to the bumper. Had to use the floor jack under the splitter to help hold it in place.
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
|
|
|
|
05-10-2019, 11:07 PM
|
#6 (permalink) |
|
A True Z Fanatic
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 70
Posts: 35,571
Drives: 2011 Nismo GM 6M
Rep Power: 2684440 |
1st and 2nd pics. Got some metric all thread. Using this for the "Gap" area of the bumper
3rd pic. Here you can see the all thread. 4th pic. The ZSpeed under tray mounted. 5th pic. Had to cut about 6" notch in the splitter to fit where the ZSpeed undertray bolts to the frame. 6th pic. Splitter bolted back up. With the Nismo Big Mouth Mod. I cut out the cross bar, and enlarged the opening some. 7th pic. Here you can see the notch in the splitter and how it clears the undertray.
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
|
|
|
|
05-10-2019, 11:15 PM
|
#7 (permalink) |
|
A True Z Fanatic
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 70
Posts: 35,571
Drives: 2011 Nismo GM 6M
Rep Power: 2684440 |
That the front of the wheel well liner. That is a gap between it and the splitter. I figured out a fix for that gap.
1st pic. The wings from the ZSpeed undertray. 2nd pic. I ground off the rivet heads between the 2 parts. 3rd pic. I pop riveted a piece of aluminum sheet to the curved piece. The sheet is in front of the liner, and the curve piece is bolted to the splitter. I also used the curve piece as a template to trim the splitter for tire clearance. 4th pic. Installed and painted with Dip-It.
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
|
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| O&G's Journal | O&G | Member's 370Z Gallery | 648 | 02-16-2017 03:30 PM |
| birdmanx1's Nismo Journal ... | birdmanx1 | Member's 370Z Gallery | 441 | 10-20-2012 03:47 PM |
| TROOPER's 370Z NISMO Journal | TROOPER | Member's 370Z Gallery | 124 | 07-29-2011 09:17 AM |
| [Equinox] Nismo dyno progression journal | Equinox | Engine & Drivetrain | 3 | 02-17-2011 03:11 PM |
| Z BEST Journal | Z BEST | Member's 370Z Gallery | 26 | 01-09-2011 03:19 PM |
2321Likes
Hybrid Mode
