O&G's Journal

O&G · 08-08-2013, 05:04 PM

Setting valves....

sent from my Samsung Galaxy Note

O&G · 08-09-2013, 12:30 PM

Went ahead and bought the 340lph. Charles from CJM is sending me the stock fuel regulator delete adapter Monday. Just going to do the return system rite now since we are still waiting on the clutch disc. Down the road Ill add a surge tank to the system and maybe some bigger rails depending on the limits of the stock rails. They're considerably larger than the VQ35 series.

sent from my Samsung Galaxy Note

O&G · 08-13-2013, 11:30 AM

Box o-parts came in. Time to get this tranny in and start this thing. Also ordered a weld in roll bar kit from autopower directly. Good price!

sent from my Samsung Galaxy Note

O&G · 08-15-2013, 04:53 PM

Car started last night, BUT threw a VVEL code for the passenger side bank. It's most likely a sensor or something I messed up. JTran is going to get it figured out for me, I had to get back to work today. Charles at CJ Motorsports shipped my fuel return kit Tuesday and I'll have it tomorrow. Awesome customer service! The only other issue I have with the car is my gauge cluster went out. Not sure if it's a fuse or what. All I did was install a fuel pressure gauge and wideband in the center cubby(which both work btw

). Most likely an easy fix. I cleaned and rebuilt every part of this car down to the CSC, locktite on the flywheel bolts, the inside of the transmission bell housing cleaned, subframe parts all cleaned, oil cooler and lines cleaned, sway bar mounts regreased using Moly, B&W shifter cleaned and regreased, driveshaft.....everything. Mr. Bergenholtz also advised me to silicon the rear main seal guaranteeing no leaks or blowouts considering the power level and my driving style!

Next on the list is fabrication of the turbo manifold, modify the single exit exhaust a bit, install and paint the weld in roll/harness bar kit from Autopower, finish the fuel return system and get some Nitto 305's for the rear. Mr. Bergenholtz got my F250 sponsored by Nitto for Formula Drift in Ft. Worth next month, $2200 in 37" tires fo free. Trying to get the Z wrapped up so I can ask him for sponsorship for that too

Can't wait to drive this thing!

GaleForce · 08-15-2013, 05:17 PM

Congrats on the sponsorship!

Meulen · 08-27-2013, 09:01 AM

subscribed! incredible build!!! love the 40th!

O&G · 08-27-2013, 09:37 AM

Thanks!

I'll be back in town Thursday to install the new VVEL solenoid on the passenger side bank. JTran is thinking that is the problem and I would have to agree with him as I dropped that solenoid during re-assembly. It wasn't my best moment. Hopefully that will remedy the VVEL issue on the passenger side bank.

Autopower roll/harness bar came in as well!

O&G · 08-27-2013, 09:44 AM

Fuel return parts I needed to complete the fuel system from Charles @ CJ Motorsports.

O&G · 09-23-2013, 10:00 PM

The car will be done before 10-25-2013, my bday

Been out of town, Formula Drifting it and busy as hell so I gave JTran some cash and said get-er-done. New VVEL solenoid ordered cuz I'm not a mechanic! I should have a lot more info in the upcoming days. The cool weather has arrived here in Texas so we should get some great temps on the dyno! Till next time my faithful followers

Boost_lee · 09-24-2013, 12:09 AM

In TX, Turbo season is here

O&G · 09-28-2013, 11:57 AM

JTran welding my roll bar together. Checked the cams on the passenger side bank and their fine. It was a faulty vvel solinoid/sensor....should be here next week.

sent from my Samsung Galaxy Note

O&G · 09-30-2013, 05:19 PM

Spent some time on the Z 2day. Got the return adapter installed. Need to run the line up to the regulator in the engine bay and Ill be done. If I decide to road race Ill do a surge tank setup for the fuel system and a dry sump setup for the oil system. Not going to risk damage to this motor!

sent from my Samsung Galaxy Note

Dzel · 09-30-2013, 06:16 PM

Nicely done

Sent with TapAhoe

Dzel · 09-30-2013, 06:17 PM

If you dint mind me asking how much for the roll cage

Sent with TapAhoe

O&G · 09-30-2013, 06:40 PM

$430 directly from Auto Power in California.

sent from my Samsung Galaxy Note

08-15-2013, 04:53 PM	#424 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 41 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	Car started last night, BUT threw a VVEL code for the passenger side bank. It's most likely a sensor or something I messed up. JTran is going to get it figured out for me, I had to get back to work today. Charles at CJ Motorsports shipped my fuel return kit Tuesday and I'll have it tomorrow. Awesome customer service! The only other issue I have with the car is my gauge cluster went out. Not sure if it's a fuse or what. All I did was install a fuel pressure gauge and wideband in the center cubby(which both work btw). Most likely an easy fix. I cleaned and rebuilt every part of this car down to the CSC, locktite on the flywheel bolts, the inside of the transmission bell housing cleaned, subframe parts all cleaned, oil cooler and lines cleaned, sway bar mounts regreased using Moly, B&W shifter cleaned and regreased, driveshaft.....everything. Mr. Bergenholtz also advised me to silicon the rear main seal guaranteeing no leaks or blowouts considering the power level and my driving style! Next on the list is fabrication of the turbo manifold, modify the single exit exhaust a bit, install and paint the weld in roll/harness bar kit from Autopower, finish the fuel return system and get some Nitto 305's for the rear. Mr. Bergenholtz got my F250 sponsored by Nitto for Formula Drift in Ft. Worth next month, $2200 in 37" tires fo free. Trying to get the Z wrapped up so I can ask him for sponsorship for that too Can't wait to drive this thing! SPOHN, Mr&Mrs and GaleForce like this. __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal Last edited by O&G; 08-15-2013 at 05:01 PM.

08-15-2013, 05:17 PM	#425 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51864	Congrats on the sponsorship! O&G likes this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

08-27-2013, 09:01 AM	#426 (permalink)
Meulen A True Z Fanatic Join Date: Aug 2013 Location: Romeoville, IL Posts: 1,093 Drives: 2010 370z 40th Rep Power: 3389	subscribed! incredible build!!! love the 40th! O&G likes this.

08-27-2013, 09:37 AM	#427 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 41 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	Thanks! I'll be back in town Thursday to install the new VVEL solenoid on the passenger side bank. JTran is thinking that is the problem and I would have to agree with him as I dropped that solenoid during re-assembly. It wasn't my best moment. Hopefully that will remedy the VVEL issue on the passenger side bank. Autopower roll/harness bar came in as well! __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

08-27-2013, 09:44 AM	#428 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 41 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	Fuel return parts I needed to complete the fuel system from Charles @ CJ Motorsports. Mr&Mrs and GaleForce like this. __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

09-23-2013, 10:00 PM	#429 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 41 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	The car will be done before 10-25-2013, my bday Been out of town, Formula Drifting it and busy as hell so I gave JTran some cash and said get-er-done. New VVEL solenoid ordered cuz I'm not a mechanic! I should have a lot more info in the upcoming days. The cool weather has arrived here in Texas so we should get some great temps on the dyno! Till next time my faithful followers Boost_lee likes this. __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

09-24-2013, 12:09 AM	#430 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 29	In TX, Turbo season is here O&G likes this. __________________ My TT Z

09-30-2013, 06:16 PM	#433 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Nicely done Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

09-30-2013, 06:17 PM	#434 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	If you dint mind me asking how much for the roll cage Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

09-30-2013, 06:40 PM	#435 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 41 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	$430 directly from Auto Power in California. sent from my Samsung Galaxy Note __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
tag journal with car color	bflosabre91	The370Z.com Feedback, Suggestions & Questions	1	05-12-2011 12:46 PM
Tsolin01's Journal	tsolin01	Member's 370Z Gallery	25	04-24-2011 08:12 PM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 03:19 PM
tao168's Journal	tao168	Member's 370Z Gallery	12	06-14-2010 08:19 AM