Dallaz 370

Skeeterbop · 11-04-2011, 01:07 AM

Quote:

Originally Posted by Dallaz

Well actually I haven't got them
Yet. Those pictures shown are of Flushnismo's car but he said they sound great. And also Somatic had just short tails before doing any other engine/exhaust mods and it sounds killer. I'm definitely going to get them

for only 400 i may do it as well lol

Skeeterbop · 11-04-2011, 01:06 AM

haha, What we were thinking was to have a body shop cut a hole down low near the bottom rear corner of the side skirt and have it blended in so the exhaust tip would actually be recessed from the surface a little. Then get a hi temp rubber O-ring to make it fit nice and snug while preventing rattles as well.

Dallaz · 11-04-2011, 01:09 AM

Quote:

Originally Posted by Skeeterbop

for only 400 i may do it as well lol

Exactly, cheap cheap cheap,
and loud loud loud

Skeeterbop · 11-04-2011, 01:13 AM

Quote:

Originally Posted by Dallaz

Exactly, cheap cheap cheap,
and loud loud loud

which is what the 370 is definitely missing. I get these and i'll think of that line from talladega nights "Daddy got his balls back."

Dallaz · 11-04-2011, 01:15 AM

Quote:

Originally Posted by Skeeterbop

haha, What we were thinking was to have a body shop cut a hole down low near the bottom rear corner of the side skirt and have it blended in so the exhaust tip would actually be recessed from the surface a little. Then get a hi temp rubber O-ring to make it fit nice and snug while preventing rattles as well.

If you guys could possibly get this to work it would be pretty crazy. It would give the opportunity for new rear diffuser designs as well

Skeeterbop · 11-04-2011, 01:30 AM

Quote:

Originally Posted by Dallaz

If you guys could possibly get this to work it would be pretty crazy. It would give the opportunity for new rear diffuser designs as well

One weekend when i have nothing better to do I'm getting it up on a lift to see what issues i might run into. Wiring is no biggie, I'm comfortable with playing with electrical stuff; it is the brake and fuel lines that i'm worried about. Theoretically the fuel lines could be rerouted if needed, but the brake lines would open a whole new can of worms.

We agree with the diffuser part, it wouldn't look right with the slots with no tips in the stock rear diffuser or any other diffuser for that matter. That is where I think it could be expensive. It would essentially be a one-off piece, which would make the car even more unique though.

Dallaz · 11-04-2011, 01:17 AM

Quote:

Originally Posted by Skeeterbop

which is what the 370 is definitely missing. I get these and i'll think of that line from talladega nights "Daddy got his balls back."

Yeah. Mine is Pretty much silent right now

Dallaz · 11-04-2011, 01:49 AM

^^ would be sick

happytheman · 11-04-2011, 06:18 PM

Hey Dallaz, yer car is looking really tight man! Curious question: How much lower is that shine auto lip than the chin spoiler that I assume you removed (as I dint see it on there now)?

Dallaz · 11-04-2011, 06:26 PM

Quote:

Originally Posted by happytheman

Hey Dallaz, yer car is looking really tight man! Curious question: How much lower is that shine auto lip than the chin spoiler that I assume you removed (as I dint see it on there now)?

Thanks.

Actually I never had to remove that. I think mine didn't have one. We were talking about that at one of our local meets. The splash guard deal on the front right? Well if that's what your talking about my friends scrape on those and I haven't scraped with the front lip yet (knock on wood)

I'm runnin stock ride height though and most of the locals are dropped

happytheman · 11-04-2011, 06:49 PM

Stock ride height? Those 20's ate some of the gap! I wouldn't change a thing!

This is a good pic of the chin spoiler that runs the whole length of the front bumper:

TheGreatOne · 11-04-2011, 07:55 PM

Great looking Z, love the progression and excellent photography skills!

I would only say definitely get something exhaust wise to mate up nicely with how aggressive it looks now...CF looks really great with the blue

Love the concave wheels too....oh by the way, rear spats, just 3m tape or any screws?

happytheman · 11-04-2011, 08:08 PM

/\ Didn't you get the carbon fiber FI? I'm trying to recall.

TheGreatOne · 11-05-2011, 12:14 AM

Quote:

Originally Posted by happytheman

/\ Didn't you get the carbon fiber FI? I'm trying to recall.

Ya I got them..love it. Will match up amazingly with this Z...

Dallaz · 11-04-2011, 08:10 PM

Quote:

Originally Posted by happytheman

Stock ride height? Those 20's ate some of the gap! I wouldn't change a thing!

This is a good pic of the chin spoiler that runs the whole length of the front bumper:

Yeah no kidding! They did close the gap a lot and erase most of the need for spacers. Thanks for the comment. If anything I would run a 5mm spacer but theres not too much of a point and I would still like to get coils so I'm gonna wait till after that and see

11-04-2011, 01:06 AM	#2 (permalink)
Skeeterbop A True Z Fanatic Join Date: Jan 2011 Location: Fort Bliss, TX Age: 41 Posts: 1,440 Drives: 2011 GM 370 base SP Rep Power: 17	haha, What we were thinking was to have a body shop cut a hole down low near the bottom rear corner of the side skirt and have it blended in so the exhaust tip would actually be recessed from the surface a little. Then get a hi temp rubber O-ring to make it fit nice and snug while preventing rattles as well. __________________ Srenity: "Yeah no rest needed to spread the love when your 20 that's for sure...."

11-04-2011, 01:49 AM	#8 (permalink)
Dallaz A True Z Fanatic Join Date: Jun 2011 Location: North Dallas Posts: 1,272 Drives: 09MontereyBlu370z6MT Rep Power: 17	^^ would be sick __________________ AeroJacket Lip Kit \| GTR switch \| NISMO S-Knob \| Blacked-Out-EVERYTHING\| 5% Tint \| Carbon Fangs/Upper Trim \| VOSSEN CV3's \| Painted Headlights \| CF Diffuser

11-04-2011, 06:18 PM	#9 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1823	Hey Dallaz, yer car is looking really tight man! Curious question: How much lower is that shine auto lip than the chin spoiler that I assume you removed (as I dint see it on there now)? __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

11-04-2011, 06:49 PM	#11 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1823	Stock ride height? Those 20's ate some of the gap! I wouldn't change a thing! This is a good pic of the chin spoiler that runs the whole length of the front bumper: __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub Last edited by happytheman; 11-04-2011 at 06:53 PM.

11-04-2011, 07:55 PM	#12 (permalink)
TheGreatOne A True Z Fanatic Join Date: Jan 2011 Location: Montreal, Canada Age: 47 Posts: 1,980 Drives: E60 BMW M5 Rep Power: 22	Great looking Z, love the progression and excellent photography skills! I would only say definitely get something exhaust wise to mate up nicely with how aggressive it looks now...CF looks really great with the blue Love the concave wheels too....oh by the way, rear spats, just 3m tape or any screws? __________________ 2017 SUBARU STI 2008 E60 M5 - SOLD 2010 40th Anniversary 370Z - SOLD (and missing her)

11-04-2011, 08:08 PM	#13 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1823	/\ Didn't you get the carbon fiber FI? I'm trying to recall. __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub