flashburn's 370Z Journal, Project: FlasHBurN Commences!

FL 4Motion · 08-23-2010, 08:12 PM

Quote:

Originally Posted by flashburn

Wow, the Harbor Freight ones are pretty damn cheap:
$19.99 for 1/4" 20-200ft-lb
1/4" Drive Click Stop Torque Wrench
$24.99 for 1/2" 20-150ft-lb
1/2" Drive Click Stop Torque Wrench

told ya.

that second one you listed is the one I have.

Based on the width of the stock 18's vs. the size tires you want to go with, you MIGHT run into an issue if you want to run wide tires.

flashburn · 08-23-2010, 08:37 PM

Okay, thanks. I'll look into it a bit closer once I get my first HPDE under my belt.

I'm thinking about getting this Floor Jack (and some jack stands) while ordering the torque wrench. How about this one:
2 Ton Low Profile Floor Service Jack

I'm just concerned with any issues using it on the rear jack point with the F.I. CBE.

Boost_lee · 08-23-2010, 11:44 PM

I'm using the same tq wrench and haven't had issues, though I do not know how accurate it is.

For a floor jack I'm using this unit
3000 Lb. Capacity Aluminum Racing Jack
This jack has been great for me so far. I've used it for about 2-3 yrs. I use it along with a sliced hockey puck to jack up on the pinch welds.

Nice car, hope to join you with the FI 18" soon

flashburn · 08-24-2010, 11:09 AM

It says its accurate within +-4%, so that doesn't seem too bad. It's on sale right now for $9.99. I've never even heard of Harbor Freight until recently, and was surprised to see they have some stores in my area. They seem to sell parts ridiculously cheap. Shipping is really cheap too, I think the estimate was at around $15 for the floor jack, stands, and torque wrench.

CrownR426 · 08-25-2010, 11:28 AM

You better get that oil cooler asap if you plan on tracking the z!

flashburn · 08-25-2010, 11:30 AM

Yep, as part of my plans I will be getting the oil cooler before tracking it. I'm probably going to pick up the Z1 Track Prep package with the oil cooler, SS brake lines, motul brake fluid, and hawk hp+ pads.

flashburn · 08-26-2010, 08:10 AM

Ugh, well I won't be doing my install this weekend. Harbor Freight is like the slowest shipper ever, its been "Processing" for two days now. Oh well, I'll be ready for next weekend hopefully.

flashburn · 08-26-2010, 12:43 PM

Well I was supposed to get my Uprev Osiris package today. However, the only thing I was sent was a cable, that is obviously used and smells like cigarette smoke, stuffed into an anti-static bag. Oh, and I got a Uprev decal too.

So I had to send them an email to find out WTF is going on. Not impressed so far. If I don't hear back by tomorrow I'm going to have to give them a call. So annoying.

edit: Turns out that is all they were supposed to send me. Apparently the guy who does the E-Tune's is traveling, so he hasn't gotten a chance to email me the steps for doing the E-Tune or the stock ROM. Doesn't seem like they have the most professional operation going on over there.

flashburn · 09-04-2010, 06:06 PM

Well I did my intakes today. Turned out pretty good, no real problems to speak of.

Took it out for a spin after also applying my base tune from Uprev. Felt a bit peppier than the K&N Dropin's I had in before. I went back and forth between the stock and base tune, and I didn't notice a difference, so I think the only thing they did was remove the speed limiter. I'm going to do data logging for the E-Tune tomorrow or the next day.

Here's few shots I took while I was working:

flashburn · 09-05-2010, 06:39 PM

Oh yeah, and I'll be selling my K&N Drop-in's as soon as I get a picture up. They only have about 5k miles of use. So if anyone is interested, send me a PM.

flashburn · 09-17-2010, 11:21 AM

Woot, got my E-Tune from Uprev the other day. They sent it over much quicker than the website says it should take (6 days versus 14 days). I was able to drive a little aggressively this morning and did notice it being a decent amount more responsive, definitely felt like it was pulling more too. I'll probably get a better chance to test things out on my way home.

Deciding on whether or not I want to do another datalog/e-tune based off of my current tune, but I probably won't for now. I'm going to see if they can look at my datalogs with my current tune to see if they think there would be any room for improvement before doing another tune.

Justin1686 · 09-23-2010, 11:36 PM

curious, how come selling the drop-ins?

Boost_lee · 09-23-2010, 11:45 PM

Quote:

Originally Posted by Justin1686

curious, how come selling the drop-ins?

tweba09 · 09-24-2010, 09:59 AM

Car looks great! You have the same spacer/tire combo I am looking at. Do you have a side shot from the rear to show how far the front and rear tires are spaced out in the fenders? Thanks.

flashburn · 09-24-2010, 11:46 AM

Thanks!

I don't have that shot, but I can do one. I want to go out and do some new shots, but I want to time it after I do a good detail. Probably next weekend.

08-23-2010, 08:37 PM	#17 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 18	Okay, thanks. I'll look into it a bit closer once I get my first HPDE under my belt. I'm thinking about getting this Floor Jack (and some jack stands) while ordering the torque wrench. How about this one: 2 Ton Low Profile Floor Service Jack I'm just concerned with any issues using it on the rear jack point with the F.I. CBE. __________________ Current Ride: 2012 Chevrolet Corvette Grand Sport Centennial Edition Carbon Flash 6M Previous Ride: 2009 Nissan 370Z Sport Platinum Graphite 7AT

08-24-2010, 11:09 AM	#19 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 18	It says its accurate within +-4%, so that doesn't seem too bad. It's on sale right now for $9.99. I've never even heard of Harbor Freight until recently, and was surprised to see they have some stores in my area. They seem to sell parts ridiculously cheap. Shipping is really cheap too, I think the estimate was at around $15 for the floor jack, stands, and torque wrench. __________________ Current Ride: 2012 Chevrolet Corvette Grand Sport Centennial Edition Carbon Flash 6M Previous Ride: 2009 Nissan 370Z Sport Platinum Graphite 7AT

08-25-2010, 11:28 AM	#20 (permalink)
CrownR426 A True Z Fanatic Join Date: Nov 2008 Location: South Korea Posts: 4,676 Drives: Manual Rep Power: 847	You better get that oil cooler asap if you plan on tracking the z! __________________ Love + Hardwork + Passion RIP SVTRacer

08-25-2010, 11:30 AM	#21 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 18	Yep, as part of my plans I will be getting the oil cooler before tracking it. I'm probably going to pick up the Z1 Track Prep package with the oil cooler, SS brake lines, motul brake fluid, and hawk hp+ pads. __________________ Current Ride: 2012 Chevrolet Corvette Grand Sport Centennial Edition Carbon Flash 6M Previous Ride: 2009 Nissan 370Z Sport Platinum Graphite 7AT

08-26-2010, 08:10 AM	#22 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 18	Ugh, well I won't be doing my install this weekend. Harbor Freight is like the slowest shipper ever, its been "Processing" for two days now. Oh well, I'll be ready for next weekend hopefully. __________________ Current Ride: 2012 Chevrolet Corvette Grand Sport Centennial Edition Carbon Flash 6M Previous Ride: 2009 Nissan 370Z Sport Platinum Graphite 7AT

08-23-2010, 11:44 PM	#18 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 29	I'm using the same tq wrench and haven't had issues, though I do not know how accurate it is. For a floor jack I'm using this unit 3000 Lb. Capacity Aluminum Racing Jack This jack has been great for me so far. I've used it for about 2-3 yrs. I use it along with a sliced hockey puck to jack up on the pinch welds. Nice car, hope to join you with the FI 18" soon

08-26-2010, 12:43 PM	#23 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 18	Well I was supposed to get my Uprev Osiris package today. However, the only thing I was sent was a cable, that is obviously used and smells like cigarette smoke, stuffed into an anti-static bag. Oh, and I got a Uprev decal too. So I had to send them an email to find out WTF is going on. Not impressed so far. If I don't hear back by tomorrow I'm going to have to give them a call. So annoying. edit: Turns out that is all they were supposed to send me. Apparently the guy who does the E-Tune's is traveling, so he hasn't gotten a chance to email me the steps for doing the E-Tune or the stock ROM. Doesn't seem like they have the most professional operation going on over there. __________________ Current Ride: 2012 Chevrolet Corvette Grand Sport Centennial Edition Carbon Flash 6M Previous Ride: 2009 Nissan 370Z Sport Platinum Graphite 7AT Last edited by flashburn; 08-26-2010 at 04:29 PM.

09-04-2010, 06:06 PM	#24 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 18	Well I did my intakes today. Turned out pretty good, no real problems to speak of. Took it out for a spin after also applying my base tune from Uprev. Felt a bit peppier than the K&N Dropin's I had in before. I went back and forth between the stock and base tune, and I didn't notice a difference, so I think the only thing they did was remove the speed limiter. I'm going to do data logging for the E-Tune tomorrow or the next day. Here's few shots I took while I was working: __________________ Current Ride: 2012 Chevrolet Corvette Grand Sport Centennial Edition Carbon Flash 6M Previous Ride: 2009 Nissan 370Z Sport Platinum Graphite 7AT

09-05-2010, 06:39 PM	#25 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 18	Oh yeah, and I'll be selling my K&N Drop-in's as soon as I get a picture up. They only have about 5k miles of use. So if anyone is interested, send me a PM. __________________ Current Ride: 2012 Chevrolet Corvette Grand Sport Centennial Edition Carbon Flash 6M Previous Ride: 2009 Nissan 370Z Sport Platinum Graphite 7AT

09-17-2010, 11:21 AM	#26 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 18	Woot, got my E-Tune from Uprev the other day. They sent it over much quicker than the website says it should take (6 days versus 14 days). I was able to drive a little aggressively this morning and did notice it being a decent amount more responsive, definitely felt like it was pulling more too. I'll probably get a better chance to test things out on my way home. Deciding on whether or not I want to do another datalog/e-tune based off of my current tune, but I probably won't for now. I'm going to see if they can look at my datalogs with my current tune to see if they think there would be any room for improvement before doing another tune. __________________ Current Ride: 2012 Chevrolet Corvette Grand Sport Centennial Edition Carbon Flash 6M Previous Ride: 2009 Nissan 370Z Sport Platinum Graphite 7AT

09-23-2010, 11:36 PM	#27 (permalink)
Justin1686 Track Member Join Date: Apr 2009 Location: Nassau, NY Age: 37 Posts: 689 Drives: 09 370 PG AT Rep Power: 17	curious, how come selling the drop-ins? __________________ 2009 Touring & Sport Package \|\| Platinum Graphite \|\| 40% 3M Tint \|\| Xpel Clear Bra \|\| Berk CBE \|\| Berk HFC \|\| Stillen Sway Bar \|\| H&R Spacers \|\| Swift Springs \|\| SPC Rear Camber Kit \|\| Thanks to Savage Autosports, VTR, PM, and R.A.D.

09-24-2010, 09:59 AM	#29 (permalink)
tweba09 Base Member Join Date: May 2010 Location: Tampa, FL Posts: 32 Drives: 09 Sport/Touring Z Rep Power: 14	Car looks great! You have the same spacer/tire combo I am looking at. Do you have a side shot from the rear to show how far the front and rear tires are spaced out in the fenders? Thanks. __________________ 09' PW Touring with Sport Package 15% tint, 255/40 Front and 285/35 Rear Hankook V12's

09-24-2010, 11:46 AM	#30 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 18	Thanks! I don't have that shot, but I can do one. I want to go out and do some new shots, but I want to time it after I do a good detail. Probably next weekend. __________________ Current Ride: 2012 Chevrolet Corvette Grand Sport Centennial Edition Carbon Flash 6M Previous Ride: 2009 Nissan 370Z Sport Platinum Graphite 7AT

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LinPark's 370Z Journal	LinPark	Member's 370Z Gallery	60	07-27-2018 10:07 PM
LunaZ's 370Z Journal	LunaZ	Member's 370Z Gallery	54	11-29-2017 09:33 AM
RCZ's 370Z Journal.	RCZ	Member's 370Z Gallery	1743	08-09-2013 11:55 PM
LateralG'z 370Z Journal	LateralG'z	Member's 370Z Gallery	54	12-25-2010 05:27 PM
My 370Z Journal - The Evo Killer	EVO_Killer	Member's 370Z Gallery	57	09-01-2009 09:51 AM