Boost_Lee's 09 Monterrey Blue Z

sfearl1 · 09-26-2012, 08:50 AM

Awesome, looks like G2's!

But that SSR coffee table

Get the lip on yet?

batman_4 · 09-26-2012, 10:35 AM

, no more tease!

side note: i got that same canvas in my room

, also what did you use to put on the lip of that SSR rim to make a table? i have an old O.Z. Superleggera rim and want to do the same.

Boost_lee · 09-26-2012, 04:26 PM

Yep g2's will be on soon. I need to save for powdercoating
These should save me about 5lbs per corner on the rotational mass.

As for the table G, I just used pieces of vacuum lines sliced in half. I slip over the lip and the glass won't slide

1cleanZ · 09-26-2012, 10:27 PM

very sick z indeed...but damn man....

FI>MD anyday!!!

versus

Boost_lee · 09-27-2012, 02:23 AM

Thanks

but sound-wise I prefer the MD

This (18" FI + ART Pipes)

vs this (MD+ART Pipes)

axmea? · 10-08-2012, 10:00 PM

Quote:

Originally Posted by Boost_lee

Thanks

but sound-wise I prefer the MD

This (18" FI + ART Pipes)

vs this (MD+ART Pipes)

i agree with you Boost. Between the two, the MD sounds better. IMHO, a 12" non res CF would probably be a good match to the MD. Would like to see a comparative video of that someday.

Boost_lee · 10-15-2012, 02:25 AM

I was spotted tonight

Hoping for more pics of my car Version 3.0

in the next few weeks

tibal · 10-15-2012, 08:09 PM

Quote:

Originally Posted by Boost_lee

I was spotted tonight

Hoping for more pics of my car Version 3.0

in the next few weeks

I like this pic!

98intrigue · 10-08-2012, 05:31 PM

Where's the wheel?....and boost?

mantella87 · 10-08-2012, 06:24 PM

New lip looks great, Boost! I have a question for you, I have the Stillen splitter and I was considering the Ings+ as well. What did you do when replacing the lip as far as cleaning up the marks/tape residue left from the Stillen lip? Also, does the Ings+ cover the holes left on the inside of the front wheel wells where the Stillen was previously attached? Thanks!

LakeShow · 10-08-2012, 06:54 PM

Sick!

Boost_lee · 10-08-2012, 07:53 PM

thanks guys. I wasn't going to mount the wheels until I got them powdercoated, but after seeing those pics I'm going to install them as flat black for a few months.

As for the ings lip, it does not cover the holes on the side of the front bumper unfortunately. As for the tape residue, it all came off with soap and water using my fingernails. I used some prep spray to remove the hard to get stuff. One thing different on the ings lip is that you need to remove the sport chin spoiler.

LakeShow · 10-15-2012, 02:53 AM

Nice, cool to be spotted in a pic!

EverGreatest · 10-15-2012, 09:58 PM

nice mods bro

Z370Z011 · 10-19-2012, 01:09 PM

i can prob find a better use for 100$ but, this is too cool to resist! its my next modd!haha

09-26-2012, 08:50 AM	#1 (permalink)
sfearl1 A True Z Fanatic Join Date: Oct 2011 Location: St. Louis Posts: 2,300 Drives: 2013 FBO E85 GTR Rep Power: 18	Awesome, looks like G2's! But that SSR coffee table Get the lip on yet? __________________ Scott

09-26-2012, 10:35 AM	#2 (permalink)
batman_4 A True Z Fanatic Join Date: Dec 2008 Location: McAllen Tx. Posts: 1,038 Drives: '09 PW 370Z Rep Power: 368	, no more tease! side note: i got that same canvas in my room , also what did you use to put on the lip of that SSR rim to make a table? i have an old O.Z. Superleggera rim and want to do the same. __________________ '09 6spd. Touring: Eibach / SPC / Motordyne / Berk / Z1 / Oneighty / Mines / SSR / Stillen / CFE

09-26-2012, 04:26 PM	#3 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 30	Yep g2's will be on soon. I need to save for powdercoating These should save me about 5lbs per corner on the rotational mass. As for the table G, I just used pieces of vacuum lines sliced in half. I slip over the lip and the glass won't slide __________________ My TT Z

09-26-2012, 10:27 PM	#4 (permalink)
1cleanZ A True Z Fanatic Join Date: Dec 2010 Location: Twin Cities, MN Posts: 1,132 Drives: '09 PW Nismo Rep Power: 21	very sick z indeed...but damn man.... FI>MD anyday!!! versus __________________ 2009 PW Nismo #0021 -My Built Progress >>1cleanG to 1cleanZ<< Team NextLevel

09-27-2012, 02:23 AM	#5 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 30	Thanks but sound-wise I prefer the MD This (18" FI + ART Pipes) vs this (MD+ART Pipes) jae35 likes this. __________________ My TT Z Last edited by Boost_lee; 09-27-2012 at 04:51 PM.

10-15-2012, 02:25 AM	#7 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 30	I was spotted tonight Hoping for more pics of my car Version 3.0 in the next few weeks batman_4 and Nut_N_Much like this. __________________ My TT Z

10-08-2012, 05:31 PM	#9 (permalink)
98intrigue A True Z Fanatic Join Date: Jul 2010 Location: Clearwater, FL Age: 40 Posts: 4,855 Drives: 2014 Viper Rep Power: 431	Where's the wheel?....and boost? __________________ Ryan - 2014 Stryker Green Viper Gone - a few Vipers and a couple turbo VQs

10-08-2012, 06:24 PM	#10 (permalink)
mantella87 Track Member Join Date: Jun 2011 Location: Sacramento, CA Posts: 590 Drives: 2011 Z34 MT Rep Power: 16	New lip looks great, Boost! I have a question for you, I have the Stillen splitter and I was considering the Ings+ as well. What did you do when replacing the lip as far as cleaning up the marks/tape residue left from the Stillen lip? Also, does the Ings+ cover the holes left on the inside of the front wheel wells where the Stillen was previously attached? Thanks!

10-08-2012, 06:54 PM	#11 (permalink)
LakeShow A True Z Fanatic Join Date: Dec 2010 Location: L.I., NY Posts: 5,307 Drives: Everything Rep Power: 26	Sick! __________________ \|2013 Audi S4\|Ibis White/Black\|S-Tronic P+\| \|2013 370z\|PearlWhite/Persimmon\|Touring/Sport/Nav\|F.I. CBE 18" CF\| \|Sold\|2011 370z\|Gun Metallic\|Touring/Sport/Nav\|

10-08-2012, 07:53 PM	#12 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 30	thanks guys. I wasn't going to mount the wheels until I got them powdercoated, but after seeing those pics I'm going to install them as flat black for a few months. As for the ings lip, it does not cover the holes on the side of the front bumper unfortunately. As for the tape residue, it all came off with soap and water using my fingernails. I used some prep spray to remove the hard to get stuff. One thing different on the ings lip is that you need to remove the sport chin spoiler. __________________ My TT Z

10-15-2012, 02:53 AM	#13 (permalink)
LakeShow A True Z Fanatic Join Date: Dec 2010 Location: L.I., NY Posts: 5,307 Drives: Everything Rep Power: 26	Nice, cool to be spotted in a pic! __________________ \|2013 Audi S4\|Ibis White/Black\|S-Tronic P+\| \|2013 370z\|PearlWhite/Persimmon\|Touring/Sport/Nav\|F.I. CBE 18" CF\| \|Sold\|2011 370z\|Gun Metallic\|Touring/Sport/Nav\|

10-15-2012, 09:58 PM	#14 (permalink)
EverGreatest Base Member Join Date: Nov 2011 Location: Las Vegas Age: 33 Posts: 19 Drives: Slow Rep Power: 14	nice mods bro

10-19-2012, 01:09 PM	#15 (permalink)
Z370Z011 A True Z Fanatic Join Date: Jul 2012 Location: Los Angeles CA Posts: 1,052 Drives: PearlWhite 370z 6MT Rep Power: 16	i can prob find a better use for 100$ but, this is too cool to resist! its my next modd!haha Last edited by Z370Z011; 10-19-2012 at 03:24 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Monterey Blue vs. Laguna Seca Blue	smurfblu13	Nissan 370Z General Discussions	28	05-13-2011 08:56 PM
Who has the blue Z with...........?	g200driver	Nissan 370Z General Discussions	7	07-29-2010 11:13 PM
feeler: 09 base Monterrey blue sport packg $27000	sebaztianl	370Z For Sale	28	02-17-2010 07:25 PM
BLUE interior!	2theextreme	Mid-Atlantic Region	22	09-15-2009 10:18 AM
New Blue Z	Blue Baby	Introduction	2	05-28-2009 07:10 PM