DDM Project 370Z

gorillanismo · 11-21-2009, 10:42 PM

i love the z

JB-370z · 11-24-2009, 11:50 AM

Do you know when the dry carbon engine cover is going to be released from password JDM?

M.Bonanni · 11-24-2009, 12:08 PM

Quote:

Originally Posted by JB-370z

Do you know when the dry carbon engine cover is going to be released from password JDM?

I don't. I know they are trying to get my 370Z back in there to finish it up, but scheduling between us is tough through the holidays. They might try and find a local one to finish it up on, but not sure.

ROGUE · 12-14-2009, 12:43 AM

Loving the seats.

M.Bonanni · 12-15-2009, 06:18 PM

^^Thanks

. Now I just need a roll bar or harness bar and some harnesses so I can use them for something other than car shows

.

On another note. I finally got around to installing the SPL Parts Pro Rear Traction Arms. Man what an easy install.

Raised the car another 1/2" all around to see how it effects handling. I think I was too low in the past to utilize the "sweet spot" for the suspension geometry. I also switched back to the stock sway bars for now. New vinyl layout coming on Thursday along with Version #2 of the Kognition Design wing then its off to Streets of Willow Springs for the Redline Time Attack Customer Appreciation Day on Friday. I just hope my tires have enough life in them to drive out there from Vegas, do the track day, and drive back.

M.Bonanni · 01-07-2010, 06:50 PM

Since DDM is closed down, I started a new thread about this car here...

M.Bonanni's 370Z Project "Born Again"

11-21-2009, 10:42 PM	#1 (permalink)
gorillanismo Base Member Join Date: Jun 2009 Location: Puerto Rico Posts: 112 Drives: 03Chevrolet Cavalier Rep Power: 17	i love the z __________________ SHIFT: The Future NISSAN

12-14-2009, 12:43 AM	#4 (permalink)
ROGUE Base Member Join Date: Dec 2009 Location: DEPLOYED Age: 45 Posts: 12 Drives: 99 CTR 4 Sale Rep Power: 17	Loving the seats. __________________ Rogue Motorsports OIF Veteran / ISAF Current

12-15-2009, 06:18 PM	#5 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1322	^^Thanks . Now I just need a roll bar or harness bar and some harnesses so I can use them for something other than car shows . On another note. I finally got around to installing the SPL Parts Pro Rear Traction Arms. Man what an easy install. Raised the car another 1/2" all around to see how it effects handling. I think I was too low in the past to utilize the "sweet spot" for the suspension geometry. I also switched back to the stock sway bars for now. New vinyl layout coming on Thursday along with Version #2 of the Kognition Design wing then its off to Streets of Willow Springs for the Redline Time Attack Customer Appreciation Day on Friday. I just hope my tires have enough life in them to drive out there from Vegas, do the track day, and drive back. __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

01-07-2010, 06:50 PM	#6 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1322	Since DDM is closed down, I started a new thread about this car here... M.Bonanni's 370Z Project "Born Again" __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-24-2009, 11:50 AM	#2 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 21	Do you know when the dry carbon engine cover is going to be released from password JDM?